Evolution of the Intrinsics The interfaces described by this specification have undergone several sets of revisions in the course of adoption as an X Consortium standard specification. Having now been adopted by the Consortium as a standard part of the X Window System, it is expected that this and future revisions will retain backward compatibility in the sense that fully conforming implementations of these specifications may be produced that provide source compatibility with widgets and applications written to previous Consortium standard revisions. The Intrinsics do not place any special requirement on widget programmers to retain source or binary compatibility for their widgets as they evolve, but several conventions have been established to assist those developers who want to provide such compatibility. In particular, widget programmers may wish to conform to the convention described in when defining class extension records. Determining Specification Revision Level Widget and application developers who wish to maintain a common source pool that will build properly with implementations of the Intrinsics at different revision levels of these specifications but that take advantage of newer features added in later revisions may use the symbolic macro XtSpecificationRelease. #define XtSpecificationRelease 6 As the symbol XtSpecificationRelease was new to Release 4, widgets and applications desiring to build against earlier implementations should test for the presence of this symbol and assume only Release 3 interfaces if the definition is not present. Release 3 to Release 4 Compatibility At the data structure level, Release 4 retains binary compatibility with Release 3 (the first X Consortium standard release) for all data structures except WMShellPart, TopLevelShellPart, and TransientShellPart. Release 4 changed the argument type to most procedures that now take arguments of type XtPointer and structure members that are now of type XtPointer in order to avoid potential ANSI C conformance problems. It is expected that most implementations will be binary compatible with the previous definition. Two fields in CoreClassPart were changed from Boolean to XtEnum to allow implementations additional freedom in specifying the representations of each. This change should require no source modification. Additional Arguments Arguments were added to the procedure definitions for , , and to provide more information and to allow event handlers to abort further dispatching of the current event (caution is advised!). The added arguments to and make the initialize_hook and set_values_hook methods obsolete, but the hooks have been retained for those widgets that used them in Release 3. set_values_almost Procedures The use of the arguments by a set_values_almost procedure was poorly described in Release 3 and was inconsistent with other conventions. The current specification for the manner in which a set_values_almost procedure returns information to the Intrinsics is not compatible with the Release 3 specification, and all widget implementations should verify that any set_values_almost procedures conform to the current interface. No known implementation of the Intrinsics correctly implemented the Release 3 interface, so it is expected that the impact of this specification change is small. Query Geometry A composite widget layout routine that calls is now expected to store the complete new geometry in the intended structure; previously the specification said ``store the changes it intends to make''. Only by storing the complete geometry does the child have any way to know what other parts of the geometry may still be flexible. Existing widgets should not be affected by this, except to take advantage of the new information. unrealizeCallback Callback List In order to provide a mechanism for widgets to be notified when they become unrealized through a call to , the callback list name ``unrealizeCallback'' has been defined by the Intrinsics. A widget class that requires notification on unrealize may declare a callback list resource by this name. No class is required to declare this resource, but any class that did so in a prior revision may find it necessary to modify the resource name if it does not wish to use the new semantics. Subclasses of WMShell The formal adoption of the Inter-Client Communication Conventions Manual. as an X Consortium standard has meant the addition of four fields to WMShellPart and one field to TopLevelShellPart. In deference to some widget libraries that had developed their own additional conventions to provide binary compatibility, these five new fields were added at the end of the respective data structures. To provide more convenience for TransientShells, a field was added to the previously empty TransientShellPart. On some architectures the size of the part structure will not have changed as a result of this. Any widget implementation whose class is a subclass of TopLevelShell or TransientShell must at minimum be recompiled with the new data structure declarations. Because WMShellPart no longer contains a contiguous XSizeHints data structure, a subclass that expected to do a single structure assignment of an XSizeHints structure to the size_hints field of WMShellPart must be revised, though the old fields remain at the same positions within WMShellPart. Resource Type Converters A new interface declaration for resource type converters was defined to provide more information to converters, to support conversion cache cleanup with resource reference counting, and to allow additional procedures to be declared to free resources. The old interfaces remain (in the compatibility section), and a new set of procedures was defined that work only with the new type converter interface. In the now obsolete old type converter interface, converters are reminded that they must return the size of the converted value as well as its address. The example indicated this, but the description of was incomplete. KeySym Case Conversion Procedure The specification for the function type has been changed to match the Release 3 implementation, which included necessary additional information required by the function (a pointer to the display connection), and corrects the argument type of the source KeySym parameter. No known implementation of the Intrinsics implemented the previously documented interface. Nonwidget Objects Formal support for nonwidget objects is new to Release 4. A prototype implementation was latent in at least one Release 3 implementation of the Intrinsics, but the specification has changed somewhat. The most significant change is the requirement for a composite widget to declare the CompositeClassExtension record with the accepts_objects field set to True in order to permit a client to create a nonwidget child. The addition of this extension field ensures that composite widgets written under Release 3 will not encounter unexpected errors if an application attempts to create a nonwidget child. In Release 4 there is no requirement that all composite widgets implement the extra functionality required to manage windowless children, so the accepts_objects field allows a composite widget to declare that it is not prepared to do so. Release 4 to Release 5 Compatibility At the data structure level, Release 5 retains complete binary compatibility with Release 4. The specification of the ObjectPart, RectObjPart, CorePart, CompositePart, ShellPart, WMShellPart, TopLevelShellPart, and ApplicationShellPart instance records was made less strict to permit implementations to add internal fields to these structures. Any implementation that chooses to do so would, of course, force a recompilation. The Xlib specification for XrmValue and XrmOptionDescRec was updated to use a new type, XPointer, for the addr and value fields, respectively, to avoid ANSI C conformance problems. The definition of XPointer is binary compatible with the previous implementation. baseTranslations Resource A new pseudo-resource, XtNbaseTranslations, was defined to permit application developers to specify translation tables in application defaults files while still giving end users the ability to augment or override individual event sequences. This change will affect only those applications that wish to take advantage of the new functionality or those widgets that may have previously defined a resource named ``baseTranslations''. Applications wishing to take advantage of the new functionality would change their application defaults file, e.g., from app.widget.translations: value to app.widget.baseTranslations: value If it is important to the application to preserve complete compatibility of the defaults file between different versions of the application running under Release 4 and Release 5, the full translations can be replicated in both the ``translations'' and the ``baseTranslations'' resource. Resource File Search Path The current specification allows implementations greater flexibility in defining the directory structure used to hold the application class and per-user application defaults files. Previous specifications required the substitution strings to appear in the default path in a certain order, preventing sites from collecting all the files for a specific application together in one directory. The Release 5 specification allows the default path to specify the substitution strings in any order within a single path entry. Users will need to pay close attention to the documentation for the specific implementation to know where to find these files and how to specify their own XFILESEARCHPATH and XUSERFILESEARCHPATH values when overriding the system defaults. Customization Resource supports a new substitution string, %C, for specifying separate application class resource files according to arbitrary user-specified categories. The primary motivation for this addition was separate monochrome and color application class defaults files. The substitution value is obtained by querying the current resource database for the application resource name ``customization'', class ``Customization''. Any application that previously used this resource name and class will need to be aware of the possibly conflicting semantics. Per-Screen Resource Database To allow a user to specify separate preferences for each screen of a display, a per-screen resource specification string has been added and multiple resource databases are created; one for each screen. This will affect any application that modified the (formerly unique) resource database associated with the display subsequent to the Intrinsics database initialization. Such applications will need to be aware of the particular screen on which each shell widget is to be created. Although the wording of the specification changed substantially in the description of the process by which the resource database(s) is initialized, the net effect is the same as in prior releases with the exception of the added per-screen resource specification and the new customization substitution string in . Internationalization of Applications Internationalization as defined by ANSI is a technology that allows support of an application in a single locale. In adding support for internationalization to the Intrinsics the restrictions of this model have been followed. In particular, the new Intrinsics interfaces are designed not to preclude an application from using other alternatives. For this reason, no Intrinsics routine makes a call to establish the locale. However, a convenience routine to establish the locale at initialize time has been provided, in the form of a default procedure that must be explicitly installed if the application desires ANSI C locale behavior. As many objects in X, particularly resource databases, now inherit the global locale when they are created, applications wishing to use the ANSI C locale model should use the new function XtSetLanguageProc to do so. The internationalization additions also define event filters as a part of the Xlib Input Method specifications. The Intrinsics enable the use of event filters through additions to . Applications that may not be dispatching all events through should be reviewed in the context of this new input method mechanism. In order to permit internationalization of error messages, the name and path of the error database file are now allowed to be implementation-dependent. No adequate standard mechanism has yet been suggested to allow the Intrinsics to locate the database from localization information supplied by the client. The previous specification for the syntax of the language string specified by xnlLanguage has been dropped to avoid potential conflicts with other standards. The language string syntax is now implementation-defined. The example syntax cited is consistent with the previous specification. Permanently Allocated Strings In order to permit additional memory savings, an Xlib interface was added to allow the resource manager to avoid copying certain string constants. The Intrinsics specification was updated to explicitly require the Object class_name, resource_name, resource_class, resource_type, default_type in resource tables, Core actions string field, and Constraint resource_name, resource_class, resource_type, and default_type resource fields to be permanently allocated. This explicit requirement is expected to affect only applications that may create and destroy classes on the fly. Arguments to Existing Functions The args argument to , , , , and were changed from Cardinal* to int* to conform to pre-existing convention and avoid otherwise annoying typecasting in ANSI C environments. Release 5 to Release 6 Compatibility At the data structure level, Release 6 retains binary compatibility with Release 5 for all data structures except WMShellPart. Three resources were added to the specification. The known implementations had unused space in the data structure, therefore on some architectures and implementations, the size of the part structure will not have changed as a result of this. Widget Internals Two new widget methods for instance allocation and deallocation were added to the Object class. These new methods allow widgets to be treated as C++ objects in the C++ environment when an appropriate allocation method is specified or inherited by the widget class. The textual descriptions of the processes of widget creation and widget destruction have been edited to provide clarification to widget writers. Widgets writers may have reason to rely on the specific order of the stages of widget creation and destruction; with that motivation, the specification now more exactly describes the process. As a convenience, an interface to locate a widget class extension record on a linked list, , has been added. A new option to allow bundled changes to the managed set of a Composite widget is introduced in the Composite class extension record. Widgets that define a change_managed procedure that can accommodate additions and deletions to the managed set of children in a single invocation should set allows_change_managed_set to True in the extension record. The wording of the process followed by has changed slightly to better handle changes to the managed set during phase 2 destroy processing. A new exposure event compression flag, XtExposeNoRegion, was added. Many widgets specify exposure compression, but either ignore the actual damage region passed to the core expose procedure or use only the cumulative bounding box data available in the event. Widgets with expose procedures that do not make use of exact exposure region information can indicate that the Intrinsics need not compute the region. General Application Development is a new convenience procedure to initialize the toolkit, create an application context, open an X display connection, and create the root of the widget instance tree. It is identical to the interface it replaces, , in all respects except that it takes an additional argument specifying the widget class of the root shell to create. This interface is now the recommended one so that clients may easily become session participants. The old convenience procedures appear in the compatibility section. The toolkit initialization function may be called multiple times without penalty. In order to optimize changes in geometry to a set of geometry-managed children, a new interface, , has been added. Communication with Window and Session Managers The revision of the Inter-Client Communication Conventions Manual. as an X Consortium standard has resulted in the addition of three fields to the specification of WMShellPart. These are urgency, client_leader, and window_role. The adoption of the X Session Management Protocol as an X Consortium standard has resulted in the addition of a new shell widget, SessionShell, and an accompanying subclass verification interface, XtIsSessionShell. This widget provides support for communication between an application and a session manager, as well as a window manager. In order to preserve compatibility with existing subclasses of ApplicationShell, the ApplicationShell was subclassed to create the new widget class. The session protocol requires a modal response to certain checkpointing operations by participating applications. The SessionShell structures the application's notification of and responses to messages from the session manager by use of various callback lists and by use of the new interfaces and . There is also a new command line argument, -xtsessionID, which facilitates the session manager in restarting applications based on the Intrinsics. The resource name and class strings defined by the Intrinsics shell widgets in <X11/Shell.h> are now listed in Appendix E. The addition of a new symbol for the WMShell wait_for_wm resource was made to bring the external symbol and the string it represents into agreement. The actual resource name string in WMShell has not changed. The resource representation type of the XtNwinGravity resource of the WMShell was changed to XtRGravity in order to register a type converter so that window gravity resource values could be specified by name. Geometry Management A clarification to the specification was made to indicate that geometry requests may include current values along with the requested changes. Event Management In Release 6, support is provided for registering selectors and event handlers for events generated by X protocol extensions and for dispatching those events to the appropriate widget. The new event handler registration interfaces are and . Since the mechanism to indicate selection of extension events is specific to the extension being used, the Intrinsics introduces , which allows the application to select for the events of interest. In order to change the dispatching algorithm to accommodate extension events as well as core X protocol events, the Intrinsics event dispatcher may now be replaced or enveloped by the application with . The dispatcher may wish to call to determine the widget with the current Intrinsics keyboard focus. A dispatcher, after determining the destination widget, may use to cause the event to be dispatched to the event handlers registered by a specific widget. To permit the dispatching of events for nonwidget drawables, such as pixmaps that are not associated with a widget's window, and have been added to the library. A related update was made to the description of . The library is now thread-safe, allowing one thread at a time to enter the library and protecting global data as necessary from concurrent use. Threaded toolkit applications are supported by the new interfaces , , , , and . Widget writers may also use and . Safe handling of POSIX signals and other asynchronous notifications is now provided by use of , , and . The application can receive notification of an impending block in the Intrinsics event manager by registering interest through and . returns the most recent event passed to for a specified display. Resource Management Resource converters are registered by the Intrinsics for window gravity and for three new resource types associated with session participation: RestartStyle, CommandArgArray and DirectoryString. The file search path syntax has been extended to make it easier to include the default search path, which controls resource database construction, by using the new substitution string, %D. Translation Management The default key translator now recognizes the NumLock modifier. If NumLock is on and the second keysym is a keypad keysym (a standard keysym named with a ``KP'' prefix or a vendor-specific keysym in the hexadecimal range 0x11000000 to 0x1100FFFF), then the default key translator will use the first keysym if Shift and/or ShiftLock is on and will use the second keysym if neither is on. Otherwise, it will ignore NumLock and apply the normal protocol semantics. Selections The targets of selection requests may be parameterized, as described by the revised Inter-Client Communication Conventions Manual.. When such requests are made, is used by the requestor to specify the target parameters and is used by the selection owner to retrieve the parameters. When a parameterized target is specified in the context of a bundled request for multiple targets, , , and are used to envelop the assembly of the request. When the parameters themselves are the names of properties, the Intrinsics provides support for the economical use of property atom names; see and . External Agent Hooks External agent hooks were added for the benefit of applications that instrument other applications for purposes of accessibility, testing, and customization. The external agent and the application communicate by a shared protocol which is transparent to the application. The hook callbacks permit the external agent to register interest in groups or classes of toolkit activity and to be notified of the type and details of the activity as it occurs. The new interfaces related to this effort are , which returns the hook registration widget, and , which returns a list of the X displays associated with an application context.