#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not many any basic syntactic
# errors.
#
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = GSRDOMAIN
# This sets the NetBIOS name by which a Samba server is known.
netbios name = TODOSCSI
# server string is the equivalent of the NT Description field
server string = SAMBA-LDAP PDC server
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
# What naming service and in what order should we use to resolve host names
# to IP addresses
name resolve order = lmhosts host wins bcast
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# The value of the parameter (a astring) allows the debug level
# (logging level) to be specified in the smb.conf file.
# (passdb:5 auth:10 winbind:2)
log level = 0
# Put a capping on the size of the log files (in Kb).
# (0 means no limit)
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc
# package for details.
security = user
# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = ldapsam:ldap://gsr.pt
# This parameter control whether or not Samba should obey PAM's
# account and session management directives. The default
# behavior is to use PAM for clear text authentication only and
# to ignore any account or session management. Note that Samba
# always ignores PAM for authentication in the case of
# encrypt passwords = yes.
obey pam restrictions = yes
# This is a username which will be used for access to services which
# are specified as "guest ok"
guest account = guest
# This is a list of users that should not be allowed to login to this service.
# invalid users = root
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr> for
# sending the correct chat script for the passwd program in Debian Potato).
; passwd program = /usr/bin/passwd %u
passwd program = /usr/local/sbin/smbldap-passwd -o %u
passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\
\spassword:* %n\n .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = no
####### LDAP-specific settings ########
# The ldap admin dn defines the Distinguished Name (DN) name used by Samba
# to contact the ldap server when retreiving user account information.
# The ldap admin dn is used in conjunction
# with the admin dn password stored in the private/secrets.tdb file.
# See the smbpasswd(8) man page for more information on how to accmplish this.
ldap admin dn = cn=admin,dc=gsr,dc=pt
# This parameter should contain the FQDN of the ldap directory server which
# should be queried to locate user account information.
; ldap server = gsr.pt
# This option is used to control the tcp port number used to contact the
# ldap server. The default is to use the stand LDAPS port 636.
; ldap port = 389
# This option is used to define whether or not Samba should use SSL when
# connecting to the ldap server. ('off', 'start tls', or 'on' (default))
ldap ssl = off
# This parameter specifies whether a delete operation in the ldapsam deletes
# the complete entry or only the attributes specific to Samba.
ldap delete dn = no
# This parameter specifies the RFC 2254 compliant LDAP search filter.
# The default is to match the login name with the uid attribute for
# all entries matching the sambaSamAccount objectclass.
# Note that this filter should only return one entry.
; ldap filter = (&(uid=%u)(objectclass=sambaSamAccount))
# Specifies where user and machine accounts are added to the tree.
# Can be overriden by ldap user suffix and ldap machine suffix.
# It also used as the base dn for all ldap searches.
ldap suffix = dc=gsr,dc=pt
# This parameter specifies where users are added to the tree.
ldap user suffix = ou=people
# This parameters specifies the suffix that is used for groups when these
# are added to the LDAP directory.
ldap group suffix = ou=groups
# It specifies where machines should be added to the ldap tree.
ldap machine suffix = ou=machines
########## Printing ##########
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap
# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
printing = cups
printcap name = cups
# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
# properties
printer admin = @domainprintoperators
######## File sharing ########
# Name mangling options
preserve case = yes
short preserve case = yes
#### Domain Controller #######
# This integer value controls what level Samba advertises itself as for browse
# elections. The value of this parameter determines whether nmbd(8) has a
# chance of becoming a local master browser for the WORKGROUP in the
# local broadcast area.
os level = 80
# This boolean parameter controls if nmbd(8) is a preferred master browser
# for its workgroup.
preferred master = yes
# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
domain master = yes
# This option allows nmbd(8) to try and become a local master browser
# on a subnet.
local master = yes
# If set to yes, the Samba server will act as a Primary Domain Controller
# (PDC) for the workgroup it is in.
domain logons = yes
# This parameter specifies the home directory where roaming profiles
# (NTuser.dat etc files for Windows NT) are stored.
logon path = \\%L\profiles\%u
# This parameter specifies the local path to which the home directory
# will be connected and is only used by NT Workstations.
logon drive = H:
# This parameter specifies the home directory location when a Win95/98
# or NT Workstation logs into a Samba PDC.
logon home = \\%L\%u\.profile
# This parameter specifies the batch file (.bat) or NT command file
# (.cmd) to be downloaded and run on a machine when a user successfully
# logs in.
; logon script = logon.cmd
logon script =
# Users and groups allowed to be 'Domain Admins'
; domain admin group = @domainadmins
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
idmap uid = 10000-20000
idmap gid = 10000-20000
# When filling out the user information for a Windows NT user,
# the winbindd(8) daemon uses this parameter to fill in the login
# shell for that user.
template shell = /bin/bash
# This parameter specifies what OS ACL semantics should be
# compatible with. Possible values are winnt for Windows NT 4,
# win2k for Windows 2000 and above and auto. If you specify auto,
# the value for this parameter will be based upon the version
# of the client. There should be no reason to change this
# parameter from the default.
acl compatibility = Auto
# Using smbldap-tools to add machines
add user script = /usr/local/sbin/smbldap-useradd.pl -w %u
#======================= Share Definitions =======================
[homes]
comment = Home Directories
# This controls whether this share is seen in the list of
# available shares in a net view and in the browse list.
browseable = no
# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
writeable = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
directory mask = 0700
[netlogon]
comment = Network Logon Service
path = /home/samba/netlogon
writeable = no
share modes = no
guest ok = yes
write list = @domainadmins
[profiles]
comment = User's Profiles
path = /home/samba/profiles
writeable = yes
browseable = no
create mask = 0600
directory mask = 0700
guest ok = yes
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
public = yes
guest ok = no
writable = no
printable = yes
use client driver = no
printer admin = root, @domainprintoperators
; create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
guest ok = no
read only = yes
write list = root, @domainprintoperators
[tmp]
comment = Temporal
writeable = yes
path = /tmp
guest ok = no
[cdrom]
comment = Samba server's CD-ROM
writable = no
locking = no
path = /cdrom
guest ok = yes
# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
; preexec = /bin/mount /cdrom |