/* $NetBSD: xhci.c,v 1.175.2.3 2024/09/20 10:52:21 martin Exp $ */ /* * Copyright (c) 2013 Jonathan A. Kollasch * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * USB rev 2.0 and rev 3.1 specification * http://www.usb.org/developers/docs/ * xHCI rev 1.1 specification * http://www.intel.com/technology/usb/spec.htm */ #include __KERNEL_RCSID(0, "$NetBSD: xhci.c,v 1.175.2.3 2024/09/20 10:52:21 martin Exp $"); #ifdef _KERNEL_OPT #include "opt_usb.h" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef USB_DEBUG #ifndef XHCI_DEBUG #define xhcidebug 0 #else /* !XHCI_DEBUG */ #define HEXDUMP(a, b, c) \ do { \ if (xhcidebug > 0) \ hexdump(printf, a, b, c); \ } while (/*CONSTCOND*/0) static int xhcidebug = 0; SYSCTL_SETUP(sysctl_hw_xhci_setup, "sysctl hw.xhci setup") { int err; const struct sysctlnode *rnode; const struct sysctlnode *cnode; err = sysctl_createv(clog, 0, NULL, &rnode, CTLFLAG_PERMANENT, CTLTYPE_NODE, "xhci", SYSCTL_DESCR("xhci global controls"), NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL); if (err) goto fail; /* control debugging printfs */ err = sysctl_createv(clog, 0, &rnode, &cnode, CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_INT, "debug", SYSCTL_DESCR("Enable debugging output"), NULL, 0, &xhcidebug, sizeof(xhcidebug), CTL_CREATE, CTL_EOL); if (err) goto fail; return; fail: aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err); } #endif /* !XHCI_DEBUG */ #endif /* USB_DEBUG */ #ifndef HEXDUMP #define HEXDUMP(a, b, c) #endif #define DPRINTF(FMT,A,B,C,D) USBHIST_LOG(xhcidebug,FMT,A,B,C,D) #define DPRINTFN(N,FMT,A,B,C,D) USBHIST_LOGN(xhcidebug,N,FMT,A,B,C,D) #define XHCIHIST_FUNC() USBHIST_FUNC() #define XHCIHIST_CALLED(name) USBHIST_CALLED(xhcidebug) #define XHCIHIST_CALLARGS(FMT,A,B,C,D) \ USBHIST_CALLARGS(xhcidebug,FMT,A,B,C,D) #define XHCI_DCI_SLOT 0 #define XHCI_DCI_EP_CONTROL 1 #define XHCI_ICI_INPUT_CONTROL 0 struct xhci_pipe { struct usbd_pipe xp_pipe; struct usb_task xp_async_task; int16_t xp_isoc_next; /* next frame */ uint8_t xp_maxb; /* max burst */ uint8_t xp_mult; }; #define XHCI_COMMAND_RING_TRBS 256 #define XHCI_EVENT_RING_TRBS 256 #define XHCI_EVENT_RING_SEGMENTS 1 #define XHCI_TRB_3_ED_BIT XHCI_TRB_3_ISP_BIT static usbd_status xhci_open(struct usbd_pipe *); static void xhci_close_pipe(struct usbd_pipe *); static int xhci_intr1(struct xhci_softc * const); static void xhci_softintr(void *); static void xhci_poll(struct usbd_bus *); static struct usbd_xfer *xhci_allocx(struct usbd_bus *, unsigned int); static void xhci_freex(struct usbd_bus *, struct usbd_xfer *); static void xhci_abortx(struct usbd_xfer *); static bool xhci_dying(struct usbd_bus *); static void xhci_get_lock(struct usbd_bus *, kmutex_t **); static usbd_status xhci_new_device(device_t, struct usbd_bus *, int, int, int, struct usbd_port *); static int xhci_roothub_ctrl(struct usbd_bus *, usb_device_request_t *, void *, int); static void xhci_pipe_restart(struct usbd_pipe *); static void xhci_pipe_restart_async_task(void *); static void xhci_pipe_restart_async(struct usbd_pipe *); static usbd_status xhci_configure_endpoint(struct usbd_pipe *); //static usbd_status xhci_unconfigure_endpoint(struct usbd_pipe *); static void xhci_reset_endpoint(struct usbd_pipe *); static usbd_status xhci_stop_endpoint_cmd(struct xhci_softc *, struct xhci_slot *, u_int, uint32_t); static usbd_status xhci_stop_endpoint(struct usbd_pipe *); static void xhci_host_dequeue(struct xhci_ring * const); static void xhci_set_dequeue(struct usbd_pipe *); static usbd_status xhci_do_command(struct xhci_softc * const, struct xhci_soft_trb * const, int); static usbd_status xhci_do_command_locked(struct xhci_softc * const, struct xhci_soft_trb * const, int); static usbd_status xhci_init_slot(struct usbd_device *, uint32_t); static void xhci_free_slot(struct xhci_softc *, struct xhci_slot *); static usbd_status xhci_set_address(struct usbd_device *, uint32_t, bool); static usbd_status xhci_enable_slot(struct xhci_softc * const, uint8_t * const); static usbd_status xhci_disable_slot(struct xhci_softc * const, uint8_t); static usbd_status xhci_address_device(struct xhci_softc * const, uint64_t, uint8_t, bool); static void xhci_set_dcba(struct xhci_softc * const, uint64_t, int); static usbd_status xhci_update_ep0_mps(struct xhci_softc * const, struct xhci_slot * const, u_int); static usbd_status xhci_ring_init(struct xhci_softc * const, struct xhci_ring **, size_t, size_t); static void xhci_ring_free(struct xhci_softc * const, struct xhci_ring ** const); static void xhci_setup_ctx(struct usbd_pipe *); static void xhci_setup_route(struct usbd_pipe *, uint32_t *); static void xhci_setup_tthub(struct usbd_pipe *, uint32_t *); static void xhci_setup_maxburst(struct usbd_pipe *, uint32_t *); static uint32_t xhci_bival2ival(uint32_t, uint32_t, uint32_t); static void xhci_noop(struct usbd_pipe *); static usbd_status xhci_root_intr_transfer(struct usbd_xfer *); static usbd_status xhci_root_intr_start(struct usbd_xfer *); static void xhci_root_intr_abort(struct usbd_xfer *); static void xhci_root_intr_close(struct usbd_pipe *); static void xhci_root_intr_done(struct usbd_xfer *); static usbd_status xhci_device_ctrl_transfer(struct usbd_xfer *); static usbd_status xhci_device_ctrl_start(struct usbd_xfer *); static void xhci_device_ctrl_abort(struct usbd_xfer *); static void xhci_device_ctrl_close(struct usbd_pipe *); static void xhci_device_ctrl_done(struct usbd_xfer *); static usbd_status xhci_device_isoc_transfer(struct usbd_xfer *); static usbd_status xhci_device_isoc_enter(struct usbd_xfer *); static void xhci_device_isoc_abort(struct usbd_xfer *); static void xhci_device_isoc_close(struct usbd_pipe *); static void xhci_device_isoc_done(struct usbd_xfer *); static usbd_status xhci_device_intr_transfer(struct usbd_xfer *); static usbd_status xhci_device_intr_start(struct usbd_xfer *); static void xhci_device_intr_abort(struct usbd_xfer *); static void xhci_device_intr_close(struct usbd_pipe *); static void xhci_device_intr_done(struct usbd_xfer *); static usbd_status xhci_device_bulk_transfer(struct usbd_xfer *); static usbd_status xhci_device_bulk_start(struct usbd_xfer *); static void xhci_device_bulk_abort(struct usbd_xfer *); static void xhci_device_bulk_close(struct usbd_pipe *); static void xhci_device_bulk_done(struct usbd_xfer *); static const struct usbd_bus_methods xhci_bus_methods = { .ubm_open = xhci_open, .ubm_softint = xhci_softintr, .ubm_dopoll = xhci_poll, .ubm_allocx = xhci_allocx, .ubm_freex = xhci_freex, .ubm_abortx = xhci_abortx, .ubm_dying = xhci_dying, .ubm_getlock = xhci_get_lock, .ubm_newdev = xhci_new_device, .ubm_rhctrl = xhci_roothub_ctrl, }; static const struct usbd_pipe_methods xhci_root_intr_methods = { .upm_transfer = xhci_root_intr_transfer, .upm_start = xhci_root_intr_start, .upm_abort = xhci_root_intr_abort, .upm_close = xhci_root_intr_close, .upm_cleartoggle = xhci_noop, .upm_done = xhci_root_intr_done, }; static const struct usbd_pipe_methods xhci_device_ctrl_methods = { .upm_transfer = xhci_device_ctrl_transfer, .upm_start = xhci_device_ctrl_start, .upm_abort = xhci_device_ctrl_abort, .upm_close = xhci_device_ctrl_close, .upm_cleartoggle = xhci_noop, .upm_done = xhci_device_ctrl_done, }; static const struct usbd_pipe_methods xhci_device_isoc_methods = { .upm_transfer = xhci_device_isoc_transfer, .upm_abort = xhci_device_isoc_abort, .upm_close = xhci_device_isoc_close, .upm_cleartoggle = xhci_noop, .upm_done = xhci_device_isoc_done, }; static const struct usbd_pipe_methods xhci_device_bulk_methods = { .upm_transfer = xhci_device_bulk_transfer, .upm_start = xhci_device_bulk_start, .upm_abort = xhci_device_bulk_abort, .upm_close = xhci_device_bulk_close, .upm_cleartoggle = xhci_noop, .upm_done = xhci_device_bulk_done, }; static const struct usbd_pipe_methods xhci_device_intr_methods = { .upm_transfer = xhci_device_intr_transfer, .upm_start = xhci_device_intr_start, .upm_abort = xhci_device_intr_abort, .upm_close = xhci_device_intr_close, .upm_cleartoggle = xhci_noop, .upm_done = xhci_device_intr_done, }; static inline uint32_t xhci_read_1(const struct xhci_softc * const sc, bus_size_t offset) { return bus_space_read_1(sc->sc_iot, sc->sc_ioh, offset); } static inline uint32_t xhci_read_2(const struct xhci_softc * const sc, bus_size_t offset) { return bus_space_read_2(sc->sc_iot, sc->sc_ioh, offset); } static inline uint32_t xhci_read_4(const struct xhci_softc * const sc, bus_size_t offset) { return bus_space_read_4(sc->sc_iot, sc->sc_ioh, offset); } static inline void xhci_write_1(const struct xhci_softc * const sc, bus_size_t offset, uint32_t value) { bus_space_write_1(sc->sc_iot, sc->sc_ioh, offset, value); } #if 0 /* unused */ static inline void xhci_write_4(const struct xhci_softc * const sc, bus_size_t offset, uint32_t value) { bus_space_write_4(sc->sc_iot, sc->sc_ioh, offset, value); } #endif /* unused */ static inline uint32_t xhci_cap_read_4(const struct xhci_softc * const sc, bus_size_t offset) { return bus_space_read_4(sc->sc_iot, sc->sc_cbh, offset); } static inline uint32_t xhci_op_read_4(const struct xhci_softc * const sc, bus_size_t offset) { return bus_space_read_4(sc->sc_iot, sc->sc_obh, offset); } static inline void xhci_op_write_4(const struct xhci_softc * const sc, bus_size_t offset, uint32_t value) { bus_space_write_4(sc->sc_iot, sc->sc_obh, offset, value); } static inline uint64_t xhci_op_read_8(const struct xhci_softc * const sc, bus_size_t offset) { uint64_t value; #ifdef XHCI_USE_BUS_SPACE_8 value = bus_space_read_8(sc->sc_iot, sc->sc_obh, offset); #else value = bus_space_read_4(sc->sc_iot, sc->sc_obh, offset); value |= (uint64_t)bus_space_read_4(sc->sc_iot, sc->sc_obh, offset + 4) << 32; #endif return value; } static inline void xhci_op_write_8(const struct xhci_softc * const sc, bus_size_t offset, uint64_t value) { #ifdef XHCI_USE_BUS_SPACE_8 bus_space_write_8(sc->sc_iot, sc->sc_obh, offset, value); #else bus_space_write_4(sc->sc_iot, sc->sc_obh, offset + 0, (value >> 0) & 0xffffffff); bus_space_write_4(sc->sc_iot, sc->sc_obh, offset + 4, (value >> 32) & 0xffffffff); #endif } static inline uint32_t xhci_rt_read_4(const struct xhci_softc * const sc, bus_size_t offset) { return bus_space_read_4(sc->sc_iot, sc->sc_rbh, offset); } static inline void xhci_rt_write_4(const struct xhci_softc * const sc, bus_size_t offset, uint32_t value) { bus_space_write_4(sc->sc_iot, sc->sc_rbh, offset, value); } static inline uint64_t xhci_rt_read_8(const struct xhci_softc * const sc, bus_size_t offset) { uint64_t value; #ifdef XHCI_USE_BUS_SPACE_8 value = bus_space_read_8(sc->sc_iot, sc->sc_rbh, offset); #else value = bus_space_read_4(sc->sc_iot, sc->sc_rbh, offset); value |= (uint64_t)bus_space_read_4(sc->sc_iot, sc->sc_rbh, offset + 4) << 32; #endif return value; } static inline void xhci_rt_write_8(const struct xhci_softc * const sc, bus_size_t offset, uint64_t value) { #ifdef XHCI_USE_BUS_SPACE_8 bus_space_write_8(sc->sc_iot, sc->sc_rbh, offset, value); #else bus_space_write_4(sc->sc_iot, sc->sc_rbh, offset + 0, (value >> 0) & 0xffffffff); bus_space_write_4(sc->sc_iot, sc->sc_rbh, offset + 4, (value >> 32) & 0xffffffff); #endif } #if 0 /* unused */ static inline uint32_t xhci_db_read_4(const struct xhci_softc * const sc, bus_size_t offset) { return bus_space_read_4(sc->sc_iot, sc->sc_dbh, offset); } #endif /* unused */ static inline void xhci_db_write_4(const struct xhci_softc * const sc, bus_size_t offset, uint32_t value) { bus_space_write_4(sc->sc_iot, sc->sc_dbh, offset, value); } /* --- */ static inline uint8_t xhci_ep_get_type(usb_endpoint_descriptor_t * const ed) { u_int eptype = 0; switch (UE_GET_XFERTYPE(ed->bmAttributes)) { case UE_CONTROL: eptype = 0x0; break; case UE_ISOCHRONOUS: eptype = 0x1; break; case UE_BULK: eptype = 0x2; break; case UE_INTERRUPT: eptype = 0x3; break; } if ((UE_GET_XFERTYPE(ed->bmAttributes) == UE_CONTROL) || (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN)) return eptype | 0x4; else return eptype; } static u_int xhci_ep_get_dci(usb_endpoint_descriptor_t * const ed) { /* xHCI 1.0 section 4.5.1 */ u_int epaddr = UE_GET_ADDR(ed->bEndpointAddress); u_int in = 0; if ((UE_GET_XFERTYPE(ed->bmAttributes) == UE_CONTROL) || (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN)) in = 1; return epaddr * 2 + in; } static inline u_int xhci_dci_to_ici(const u_int i) { return i + 1; } static inline void * xhci_slot_get_dcv(struct xhci_softc * const sc, struct xhci_slot * const xs, const u_int dci) { return KERNADDR(&xs->xs_dc_dma, sc->sc_ctxsz * dci); } #if 0 /* unused */ static inline bus_addr_t xhci_slot_get_dcp(struct xhci_softc * const sc, struct xhci_slot * const xs, const u_int dci) { return DMAADDR(&xs->xs_dc_dma, sc->sc_ctxsz * dci); } #endif /* unused */ static inline void * xhci_slot_get_icv(struct xhci_softc * const sc, struct xhci_slot * const xs, const u_int ici) { return KERNADDR(&xs->xs_ic_dma, sc->sc_ctxsz * ici); } static inline bus_addr_t xhci_slot_get_icp(struct xhci_softc * const sc, struct xhci_slot * const xs, const u_int ici) { return DMAADDR(&xs->xs_ic_dma, sc->sc_ctxsz * ici); } static inline struct xhci_trb * xhci_ring_trbv(struct xhci_ring * const xr, u_int idx) { return KERNADDR(&xr->xr_dma, XHCI_TRB_SIZE * idx); } static inline bus_addr_t xhci_ring_trbp(struct xhci_ring * const xr, u_int idx) { return DMAADDR(&xr->xr_dma, XHCI_TRB_SIZE * idx); } static inline void xhci_xfer_put_trb(struct xhci_xfer * const xx, u_int idx, uint64_t parameter, uint32_t status, uint32_t control) { KASSERTMSG(idx < xx->xx_ntrb, "idx=%u xx_ntrb=%u", idx, xx->xx_ntrb); xx->xx_trb[idx].trb_0 = parameter; xx->xx_trb[idx].trb_2 = status; xx->xx_trb[idx].trb_3 = control; } static inline void xhci_trb_put(struct xhci_trb * const trb, uint64_t parameter, uint32_t status, uint32_t control) { trb->trb_0 = htole64(parameter); trb->trb_2 = htole32(status); trb->trb_3 = htole32(control); } static int xhci_trb_get_idx(struct xhci_ring *xr, uint64_t trb_0, int *idx) { /* base address of TRBs */ bus_addr_t trbp = xhci_ring_trbp(xr, 0); /* trb_0 range sanity check */ if (trb_0 == 0 || trb_0 < trbp || (trb_0 - trbp) % sizeof(struct xhci_trb) != 0 || (trb_0 - trbp) / sizeof(struct xhci_trb) >= xr->xr_ntrb) { return 1; } *idx = (trb_0 - trbp) / sizeof(struct xhci_trb); return 0; } static unsigned int xhci_get_epstate(struct xhci_softc * const sc, struct xhci_slot * const xs, u_int dci) { uint32_t *cp; usb_syncmem(&xs->xs_dc_dma, 0, sc->sc_pgsz, BUS_DMASYNC_POSTREAD); cp = xhci_slot_get_dcv(sc, xs, dci); return XHCI_EPCTX_0_EPSTATE_GET(le32toh(cp[0])); } static inline unsigned int xhci_ctlrport2bus(struct xhci_softc * const sc, unsigned int ctlrport) { const unsigned int port = ctlrport - 1; const uint8_t bit = __BIT(port % NBBY); return __SHIFTOUT(sc->sc_ctlrportbus[port / NBBY], bit); } /* * Return the roothub port for a controller port. Both are 1..n. */ static inline unsigned int xhci_ctlrport2rhport(struct xhci_softc * const sc, unsigned int ctrlport) { return sc->sc_ctlrportmap[ctrlport - 1]; } /* * Return the controller port for a bus roothub port. Both are 1..n. */ static inline unsigned int xhci_rhport2ctlrport(struct xhci_softc * const sc, unsigned int bn, unsigned int rhport) { return sc->sc_rhportmap[bn][rhport - 1]; } /* --- */ void xhci_childdet(device_t self, device_t child) { struct xhci_softc * const sc = device_private(self); mutex_enter(&sc->sc_intr_lock); KASSERT((sc->sc_child == child) || (sc->sc_child2 == child)); if (child == sc->sc_child2) sc->sc_child2 = NULL; else if (child == sc->sc_child) sc->sc_child = NULL; mutex_exit(&sc->sc_intr_lock); } int xhci_detach(struct xhci_softc *sc, int flags) { int rv = 0; if (sc->sc_child2 != NULL) { rv = config_detach(sc->sc_child2, flags); if (rv != 0) return rv; KASSERT(sc->sc_child2 == NULL); } if (sc->sc_child != NULL) { rv = config_detach(sc->sc_child, flags); if (rv != 0) return rv; KASSERT(sc->sc_child == NULL); } /* XXX unconfigure/free slots */ /* verify: */ xhci_rt_write_4(sc, XHCI_IMAN(0), 0); xhci_op_write_4(sc, XHCI_USBCMD, 0); /* do we need to wait for stop? */ xhci_op_write_8(sc, XHCI_CRCR, 0); xhci_ring_free(sc, &sc->sc_cr); cv_destroy(&sc->sc_command_cv); cv_destroy(&sc->sc_cmdbusy_cv); xhci_rt_write_4(sc, XHCI_ERSTSZ(0), 0); xhci_rt_write_8(sc, XHCI_ERSTBA(0), 0); xhci_rt_write_8(sc, XHCI_ERDP(0), 0 | XHCI_ERDP_BUSY); xhci_ring_free(sc, &sc->sc_er); usb_freemem(&sc->sc_eventst_dma); xhci_op_write_8(sc, XHCI_DCBAAP, 0); usb_freemem(&sc->sc_dcbaa_dma); kmem_free(sc->sc_slots, sizeof(*sc->sc_slots) * sc->sc_maxslots); kmem_free(sc->sc_ctlrportbus, howmany(sc->sc_maxports * sizeof(uint8_t), NBBY)); kmem_free(sc->sc_ctlrportmap, sc->sc_maxports * sizeof(int)); for (size_t j = 0; j < __arraycount(sc->sc_rhportmap); j++) { kmem_free(sc->sc_rhportmap[j], sc->sc_maxports * sizeof(int)); } mutex_destroy(&sc->sc_rhlock); mutex_destroy(&sc->sc_lock); mutex_destroy(&sc->sc_intr_lock); pool_cache_destroy(sc->sc_xferpool); return rv; } int xhci_activate(device_t self, enum devact act) { struct xhci_softc * const sc = device_private(self); switch (act) { case DVACT_DEACTIVATE: sc->sc_dying = true; return 0; default: return EOPNOTSUPP; } } bool xhci_suspend(device_t self, const pmf_qual_t *qual) { struct xhci_softc * const sc = device_private(self); size_t i, j, bn, dci; int port; uint32_t v; usbd_status err; bool ok = false; XHCIHIST_FUNC(); XHCIHIST_CALLED(); /* * Block issuance of new commands, and wait for all pending * commands to complete. */ mutex_enter(&sc->sc_lock); KASSERT(sc->sc_suspender == NULL); sc->sc_suspender = curlwp; while (sc->sc_command_addr != 0) cv_wait(&sc->sc_cmdbusy_cv, &sc->sc_lock); mutex_exit(&sc->sc_lock); /* * Block roothub xfers which might touch portsc registers until * we're done suspending. */ mutex_enter(&sc->sc_rhlock); /* * xHCI Requirements Specification 1.2, May 2019, Sec. 4.23.2: * xHCI Power Management, p. 342 * https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf#page=342 */ /* * `1. Stop all USB activity by issuing Stop Endpoint Commands * for Busy endpoints in the Running state. If the Force * Save Context Capability (FSC = ``0'') is not supported, * then Stop Endpoint Commands shall be issued for all idle * endpoints in the Running state as well. The Stop * Endpoint Command causes the xHC to update the respective * Endpoint or Stream Contexts in system memory, e.g. the * TR Dequeue Pointer, DCS, etc. fields. Refer to * Implementation Note "0".' */ for (i = 0; i < sc->sc_maxslots; i++) { struct xhci_slot *xs = &sc->sc_slots[i]; /* Skip if the slot is not in use. */ if (xs->xs_idx == 0) continue; for (dci = XHCI_DCI_SLOT; dci <= XHCI_MAX_DCI; dci++) { /* Skip if the endpoint is not Running. */ /* XXX What about Busy? */ if (xhci_get_epstate(sc, xs, dci) != XHCI_EPSTATE_RUNNING) continue; /* Stop endpoint. */ mutex_enter(&sc->sc_lock); err = xhci_stop_endpoint_cmd(sc, xs, dci, XHCI_TRB_3_SUSP_EP_BIT); mutex_exit(&sc->sc_lock); if (err) { device_printf(self, "failed to stop endpoint" " slot %zu dci %zu err %d\n", i, dci, err); goto out; } } } /* * Next, suspend all the ports: * * xHCI Requirements Specification 1.2, May 2019, Sec. 4.15: * Suspend-Resume, pp. 276-283 * https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf#page=276 */ for (bn = 0; bn < 2; bn++) { for (i = 1; i <= sc->sc_rhportcount[bn]; i++) { /* 4.15.1: Port Suspend. */ port = XHCI_PORTSC(xhci_rhport2ctlrport(sc, bn, i)); /* * `System software places individual ports * into suspend mode by writing a ``3'' into * the appropriate PORTSC register Port Link * State (PLS) field (refer to Section 5.4.8). * Software should only set the PLS field to * ``3'' when the port is in the Enabled * state.' * * `Software should not attempt to suspend a * port unless the port reports that it is in * the enabled (PED = ``1''; PLS < ``3'') * state (refer to Section 5.4.8 for more * information about PED and PLS).' */ v = xhci_op_read_4(sc, port); if (((v & XHCI_PS_PED) == 0) || XHCI_PS_PLS_GET(v) >= XHCI_PS_PLS_U3) continue; v &= ~(XHCI_PS_PLS_MASK | XHCI_PS_CLEAR); v |= XHCI_PS_LWS | XHCI_PS_PLS_SET(XHCI_PS_PLS_SETU3); xhci_op_write_4(sc, port, v); /* * `When the PLS field is written with U3 * (``3''), the status of the PLS bit will not * change to the target U state U3 until the * suspend signaling has completed to the * attached device (which may be as long as * 10ms.).' * * `Software is required to wait for U3 * transitions to complete before it puts the * xHC into a low power state, and before * resuming the port.' * * XXX Take advantage of the technique to * reduce polling on host controllers that * support the U3C capability. */ for (j = 0; j < XHCI_WAIT_PLS_U3; j++) { v = xhci_op_read_4(sc, port); if (XHCI_PS_PLS_GET(v) == XHCI_PS_PLS_U3) break; usb_delay_ms(&sc->sc_bus, 1); } if (j == XHCI_WAIT_PLS_U3) { device_printf(self, "suspend timeout on bus %zu port %zu\n", bn, i); goto out; } } } /* * `2. Ensure that the Command Ring is in the Stopped state * (CRR = ``0'') or Idle (i.e. the Command Transfer Ring is * empty), and all Command Completion Events associated * with them have been received.' * * XXX */ /* `3. Stop the controller by setting Run/Stop (R/S) = ``0''.' */ xhci_op_write_4(sc, XHCI_USBCMD, xhci_op_read_4(sc, XHCI_USBCMD) & ~XHCI_CMD_RS); /* * `4. Read the Operational Runtime, and VTIO registers in the * following order: USBCMD, DNCTRL, DCBAAP, CONFIG, ERSTSZ, * ERSTBA, ERDP, IMAN, IMOD, and VTIO and save their * state.' * * (We don't use VTIO here (XXX for now?).) */ sc->sc_regs.usbcmd = xhci_op_read_4(sc, XHCI_USBCMD); sc->sc_regs.dnctrl = xhci_op_read_4(sc, XHCI_DNCTRL); sc->sc_regs.dcbaap = xhci_op_read_8(sc, XHCI_DCBAAP); sc->sc_regs.config = xhci_op_read_4(sc, XHCI_CONFIG); sc->sc_regs.erstsz0 = xhci_rt_read_4(sc, XHCI_ERSTSZ(0)); sc->sc_regs.erstba0 = xhci_rt_read_8(sc, XHCI_ERSTBA(0)); sc->sc_regs.erdp0 = xhci_rt_read_8(sc, XHCI_ERDP(0)); sc->sc_regs.iman0 = xhci_rt_read_4(sc, XHCI_IMAN(0)); sc->sc_regs.imod0 = xhci_rt_read_4(sc, XHCI_IMOD(0)); /* * `5. Set the Controller Save State (CSS) flag in the USBCMD * register (5.4.1)...' */ xhci_op_write_4(sc, XHCI_USBCMD, xhci_op_read_4(sc, XHCI_USBCMD) | XHCI_CMD_CSS); /* * `...and wait for the Save State Status (SSS) flag in the * USBSTS register (5.4.2) to transition to ``0''.' */ for (i = 0; i < XHCI_WAIT_SSS; i++) { if ((xhci_op_read_4(sc, XHCI_USBSTS) & XHCI_STS_SSS) == 0) break; usb_delay_ms(&sc->sc_bus, 1); } if (i >= XHCI_WAIT_SSS) { device_printf(self, "suspend timeout, USBSTS.SSS\n"); /* * Just optimistically go on and check SRE anyway -- * what's the worst that could happen? */ } /* * `Note: After a Save or Restore operation completes, the * Save/Restore Error (SRE) flag in the USBSTS register should * be checked to ensure that the operation completed * successfully.' */ if (xhci_op_read_4(sc, XHCI_USBSTS) & XHCI_STS_SRE) { device_printf(self, "suspend error, USBSTS.SRE\n"); goto out; } /* Success! */ ok = true; out: mutex_exit(&sc->sc_rhlock); if (!ok) { /* * If suspend failed, stop holding up command issuance * and make it fail instead. */ mutex_enter(&sc->sc_lock); KASSERT(sc->sc_suspender == curlwp); sc->sc_suspender = NULL; sc->sc_suspendresume_failed = true; cv_broadcast(&sc->sc_cmdbusy_cv); mutex_exit(&sc->sc_lock); } return ok; } bool xhci_resume(device_t self, const pmf_qual_t *qual) { struct xhci_softc * const sc = device_private(self); size_t i, j, bn, dci; int port; uint32_t v; bool ok = false; XHCIHIST_FUNC(); XHCIHIST_CALLED(); /* * If resume had previously failed, just try again. Can't make * things worse, probably. */ mutex_enter(&sc->sc_lock); if (sc->sc_suspendresume_failed) { KASSERT(sc->sc_suspender == NULL); sc->sc_suspender = curlwp; sc->sc_suspendresume_failed = false; } KASSERT(sc->sc_suspender); mutex_exit(&sc->sc_lock); /* * Block roothub xfers which might touch portsc registers until * we're done resuming. */ mutex_enter(&sc->sc_rhlock); /* * xHCI Requirements Specification 1.2, May 2019, Sec. 4.23.2: * xHCI Power Management, p. 343 * https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf#page=343 */ /* * `4. Restore the Operational Runtime, and VTIO registers with * their previously saved state in the following order: * DNCTRL, DCBAAP, CONFIG, ERSTSZ, ERSTBA, ERDP, IMAN, * IMOD, and VTIO.' * * (We don't use VTIO here (for now?).) */ xhci_op_write_4(sc, XHCI_USBCMD, sc->sc_regs.usbcmd); xhci_op_write_4(sc, XHCI_DNCTRL, sc->sc_regs.dnctrl); xhci_op_write_8(sc, XHCI_DCBAAP, sc->sc_regs.dcbaap); xhci_op_write_4(sc, XHCI_CONFIG, sc->sc_regs.config); xhci_rt_write_4(sc, XHCI_ERSTSZ(0), sc->sc_regs.erstsz0); xhci_rt_write_8(sc, XHCI_ERSTBA(0), sc->sc_regs.erstba0); xhci_rt_write_8(sc, XHCI_ERDP(0), sc->sc_regs.erdp0); xhci_rt_write_4(sc, XHCI_IMAN(0), sc->sc_regs.iman0); xhci_rt_write_4(sc, XHCI_IMOD(0), sc->sc_regs.imod0); memset(&sc->sc_regs, 0, sizeof(sc->sc_regs)); /* paranoia */ /* * `5. Set the Controller Restore State (CRS) flag in the * USBCMD register (5.4.1) to ``1''...' */ xhci_op_write_4(sc, XHCI_USBCMD, xhci_op_read_4(sc, XHCI_USBCMD) | XHCI_CMD_CRS); /* * `...and wait for the Restore State Status (RSS) in the * USBSTS register (5.4.2) to transition to ``0''.' */ for (i = 0; i < XHCI_WAIT_RSS; i++) { if ((xhci_op_read_4(sc, XHCI_USBSTS) & XHCI_STS_RSS) == 0) break; usb_delay_ms(&sc->sc_bus, 1); } if (i >= XHCI_WAIT_RSS) { device_printf(self, "resume timeout, USBSTS.RSS\n"); goto out; } /* * `6. Reinitialize the Command Ring, i.e. so its Cycle bits * are consistent with the RCS values to be written to the * CRCR.' * * XXX Hope just zeroing it is good enough! */ xhci_host_dequeue(sc->sc_cr); /* * `7. Write the CRCR with the address and RCS value of the * reinitialized Command Ring. Note that this write will * cause the Command Ring to restart at the address * specified by the CRCR.' */ xhci_op_write_8(sc, XHCI_CRCR, xhci_ring_trbp(sc->sc_cr, 0) | sc->sc_cr->xr_cs); /* * `8. Enable the controller by setting Run/Stop (R/S) = * ``1''.' */ xhci_op_write_4(sc, XHCI_USBCMD, xhci_op_read_4(sc, XHCI_USBCMD) | XHCI_CMD_RS); /* * `9. Software shall walk the USB topology and initialize each * of the xHC PORTSC, PORTPMSC, and PORTLI registers, and * external hub ports attached to USB devices.' * * This follows the procedure in 4.15 `Suspend-Resume', 4.15.2 * `Port Resume', 4.15.2.2 `Host Initiated'. * * XXX We should maybe batch up initiating the state * transitions, and then wait for them to complete all at once. */ for (bn = 0; bn < 2; bn++) { for (i = 1; i <= sc->sc_rhportcount[bn]; i++) { port = XHCI_PORTSC(xhci_rhport2ctlrport(sc, bn, i)); /* `When a port is in the U3 state: ...' */ v = xhci_op_read_4(sc, port); if (XHCI_PS_PLS_GET(v) != XHCI_PS_PLS_U3) continue; /* * `For a USB2 protocol port, software shall * write a ``15'' (Resume) to the PLS field to * initiate resume signaling. The port shall * transition to the Resume substate and the * xHC shall transmit the resume signaling * within 1ms (T_URSM). Software shall ensure * that resume is signaled for at least 20ms * (T_DRSMDN). Software shall start timing * T_DRSMDN from the write of ``15'' (Resume) * to PLS.' */ if (bn == 1) { KASSERT(sc->sc_bus2.ub_revision == USBREV_2_0); v &= ~(XHCI_PS_PLS_MASK | XHCI_PS_CLEAR); v |= XHCI_PS_LWS; v |= XHCI_PS_PLS_SET(XHCI_PS_PLS_SETRESUME); xhci_op_write_4(sc, port, v); usb_delay_ms(&sc->sc_bus, USB_RESUME_WAIT); } else { KASSERT(sc->sc_bus.ub_revision > USBREV_2_0); } /* * `For a USB3 protocol port [and a USB2 * protocol port after transitioning to * Resume], software shall write a ``0'' (U0) * to the PLS field...' */ v = xhci_op_read_4(sc, port); v &= ~(XHCI_PS_PLS_MASK | XHCI_PS_CLEAR); v |= XHCI_PS_LWS | XHCI_PS_PLS_SET(XHCI_PS_PLS_SETU0); xhci_op_write_4(sc, port, v); for (j = 0; j < XHCI_WAIT_PLS_U0; j++) { v = xhci_op_read_4(sc, port); if (XHCI_PS_PLS_GET(v) == XHCI_PS_PLS_U0) break; usb_delay_ms(&sc->sc_bus, 1); } if (j == XHCI_WAIT_PLS_U0) { device_printf(self, "resume timeout on bus %zu port %zu\n", bn, i); goto out; } } } /* * `10. Restart each of the previously Running endpoints by * ringing their doorbells.' */ for (i = 0; i < sc->sc_maxslots; i++) { struct xhci_slot *xs = &sc->sc_slots[i]; /* Skip if the slot is not in use. */ if (xs->xs_idx == 0) continue; for (dci = XHCI_DCI_SLOT; dci <= XHCI_MAX_DCI; dci++) { /* Skip if the endpoint is not Running. */ if (xhci_get_epstate(sc, xs, dci) != XHCI_EPSTATE_RUNNING) continue; /* Ring the doorbell. */ xhci_db_write_4(sc, XHCI_DOORBELL(xs->xs_idx), dci); } } /* * `Note: After a Save or Restore operation completes, the * Save/Restore Error (SRE) flag in the USBSTS register should * be checked to ensure that the operation completed * successfully.' */ if (xhci_op_read_4(sc, XHCI_USBSTS) & XHCI_STS_SRE) { device_printf(self, "resume error, USBSTS.SRE\n"); goto out; } /* Success! */ ok = true; out: /* * Resume command issuance. If the hardware failed to resume, * well, tough -- deadlocking because everything is held up on * the suspension, with no opportunity to detach, isn't better * than timing out waiting for dead hardware. */ mutex_enter(&sc->sc_lock); KASSERT(sc->sc_suspender); sc->sc_suspender = NULL; sc->sc_suspendresume_failed = !ok; cv_broadcast(&sc->sc_cmdbusy_cv); mutex_exit(&sc->sc_lock); mutex_exit(&sc->sc_rhlock); return ok; } bool xhci_shutdown(device_t self, int flags) { return false; } static int xhci_hc_reset(struct xhci_softc * const sc) { uint32_t usbcmd, usbsts; int i; /* Check controller not ready */ for (i = 0; i < XHCI_WAIT_CNR; i++) { usbsts = xhci_op_read_4(sc, XHCI_USBSTS); if ((usbsts & XHCI_STS_CNR) == 0) break; usb_delay_ms(&sc->sc_bus, 1); } if (i >= XHCI_WAIT_CNR) { aprint_error_dev(sc->sc_dev, "controller not ready timeout\n"); return EIO; } /* Halt controller */ usbcmd = 0; xhci_op_write_4(sc, XHCI_USBCMD, usbcmd); usb_delay_ms(&sc->sc_bus, 1); /* Reset controller */ usbcmd = XHCI_CMD_HCRST; xhci_op_write_4(sc, XHCI_USBCMD, usbcmd); for (i = 0; i < XHCI_WAIT_HCRST; i++) { /* * Wait 1ms first. Existing Intel xHCI requires 1ms delay to * prevent system hang (Errata). */ usb_delay_ms(&sc->sc_bus, 1); usbcmd = xhci_op_read_4(sc, XHCI_USBCMD); if ((usbcmd & XHCI_CMD_HCRST) == 0) break; } if (i >= XHCI_WAIT_HCRST) { aprint_error_dev(sc->sc_dev, "host controller reset timeout\n"); return EIO; } /* Check controller not ready */ for (i = 0; i < XHCI_WAIT_CNR; i++) { usbsts = xhci_op_read_4(sc, XHCI_USBSTS); if ((usbsts & XHCI_STS_CNR) == 0) break; usb_delay_ms(&sc->sc_bus, 1); } if (i >= XHCI_WAIT_CNR) { aprint_error_dev(sc->sc_dev, "controller not ready timeout after reset\n"); return EIO; } return 0; } /* 7.2 xHCI Support Protocol Capability */ static void xhci_id_protocols(struct xhci_softc *sc, bus_size_t ecp) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); /* XXX Cache this lot */ const uint32_t w0 = xhci_read_4(sc, ecp); const uint32_t w4 = xhci_read_4(sc, ecp + 4); const uint32_t w8 = xhci_read_4(sc, ecp + 8); const uint32_t wc = xhci_read_4(sc, ecp + 0xc); aprint_debug_dev(sc->sc_dev, " SP: 0x%08x 0x%08x 0x%08x 0x%08x\n", w0, w4, w8, wc); if (w4 != XHCI_XECP_USBID) return; const int major = XHCI_XECP_SP_W0_MAJOR(w0); const int minor = XHCI_XECP_SP_W0_MINOR(w0); const uint8_t cpo = XHCI_XECP_SP_W8_CPO(w8); const uint8_t cpc = XHCI_XECP_SP_W8_CPC(w8); const uint16_t mm = __SHIFTOUT(w0, __BITS(31, 16)); switch (mm) { case 0x0200: case 0x0300: case 0x0301: case 0x0310: case 0x0320: aprint_debug_dev(sc->sc_dev, " %s ports %d - %d\n", major == 3 ? "ss" : "hs", cpo, cpo + cpc - 1); if (major == 3) sc->sc_usb3nports += cpo + cpc - 1; else sc->sc_usb2nports += cpo + cpc - 1; break; default: aprint_error_dev(sc->sc_dev, " unknown major/minor (%d/%d)\n", major, minor); return; } const size_t bus = (major == 3) ? 0 : 1; /* Index arrays with 0..n-1 where ports are numbered 1..n */ for (size_t cp = cpo - 1; cp < cpo + cpc - 1; cp++) { if (sc->sc_ctlrportmap[cp] != 0) { aprint_error_dev(sc->sc_dev, "controller port %zu " "already assigned", cp); continue; } sc->sc_ctlrportbus[cp / NBBY] |= bus == 0 ? 0 : __BIT(cp % NBBY); const size_t rhp = sc->sc_rhportcount[bus]++; KASSERTMSG(sc->sc_rhportmap[bus][rhp] == 0, "bus %zu rhp %zu is %d", bus, rhp, sc->sc_rhportmap[bus][rhp]); sc->sc_rhportmap[bus][rhp] = cp + 1; sc->sc_ctlrportmap[cp] = rhp + 1; } } /* Process extended capabilities */ static void xhci_ecp(struct xhci_softc *sc) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); bus_size_t ecp = XHCI_HCC_XECP(sc->sc_hcc) * 4; while (ecp != 0) { uint32_t ecr = xhci_read_4(sc, ecp); aprint_debug_dev(sc->sc_dev, "ECR: 0x%08x\n", ecr); switch (XHCI_XECP_ID(ecr)) { case XHCI_ID_PROTOCOLS: { xhci_id_protocols(sc, ecp); break; } case XHCI_ID_USB_LEGACY: { uint8_t bios_sem; /* Take host controller ownership from BIOS */ bios_sem = xhci_read_1(sc, ecp + XHCI_XECP_BIOS_SEM); if (bios_sem) { /* sets xHCI to be owned by OS */ xhci_write_1(sc, ecp + XHCI_XECP_OS_SEM, 1); aprint_debug_dev(sc->sc_dev, "waiting for BIOS to give up control\n"); for (int i = 0; i < 5000; i++) { bios_sem = xhci_read_1(sc, ecp + XHCI_XECP_BIOS_SEM); if (bios_sem == 0) break; DELAY(1000); } if (bios_sem) { aprint_error_dev(sc->sc_dev, "timed out waiting for BIOS\n"); } } break; } default: break; } ecr = xhci_read_4(sc, ecp); if (XHCI_XECP_NEXT(ecr) == 0) { ecp = 0; } else { ecp += XHCI_XECP_NEXT(ecr) * 4; } } } #define XHCI_HCCPREV1_BITS \ "\177\020" /* New bitmask */ \ "f\020\020XECP\0" \ "f\014\4MAXPSA\0" \ "b\013CFC\0" \ "b\012SEC\0" \ "b\011SBD\0" \ "b\010FSE\0" \ "b\7NSS\0" \ "b\6LTC\0" \ "b\5LHRC\0" \ "b\4PIND\0" \ "b\3PPC\0" \ "b\2CZC\0" \ "b\1BNC\0" \ "b\0AC64\0" \ "\0" #define XHCI_HCCV1_x_BITS \ "\177\020" /* New bitmask */ \ "f\020\020XECP\0" \ "f\014\4MAXPSA\0" \ "b\013CFC\0" \ "b\012SEC\0" \ "b\011SPC\0" \ "b\010PAE\0" \ "b\7NSS\0" \ "b\6LTC\0" \ "b\5LHRC\0" \ "b\4PIND\0" \ "b\3PPC\0" \ "b\2CSZ\0" \ "b\1BNC\0" \ "b\0AC64\0" \ "\0" #define XHCI_HCC2_BITS \ "\177\020" /* New bitmask */ \ "b\7ETC_TSC\0" \ "b\6ETC\0" \ "b\5CIC\0" \ "b\4LEC\0" \ "b\3CTC\0" \ "b\2FSC\0" \ "b\1CMC\0" \ "b\0U3C\0" \ "\0" void xhci_start(struct xhci_softc *sc) { xhci_rt_write_4(sc, XHCI_IMAN(0), XHCI_IMAN_INTR_ENA); if ((sc->sc_quirks & XHCI_QUIRK_INTEL) != 0) /* Intel xhci needs interrupt rate moderated. */ xhci_rt_write_4(sc, XHCI_IMOD(0), XHCI_IMOD_DEFAULT_LP); else xhci_rt_write_4(sc, XHCI_IMOD(0), 0); aprint_debug_dev(sc->sc_dev, "current IMOD %u\n", xhci_rt_read_4(sc, XHCI_IMOD(0))); /* Go! */ xhci_op_write_4(sc, XHCI_USBCMD, XHCI_CMD_INTE|XHCI_CMD_RS); aprint_debug_dev(sc->sc_dev, "USBCMD 0x%08"PRIx32"\n", xhci_op_read_4(sc, XHCI_USBCMD)); } int xhci_init(struct xhci_softc *sc) { bus_size_t bsz; uint32_t hcs1, hcs2, hcs3, dboff, rtsoff; uint32_t pagesize, config; int i = 0; uint16_t hciversion; uint8_t caplength; XHCIHIST_FUNC(); XHCIHIST_CALLED(); /* Set up the bus struct for the usb 3 and usb 2 buses */ sc->sc_bus.ub_methods = &xhci_bus_methods; sc->sc_bus.ub_pipesize = sizeof(struct xhci_pipe); sc->sc_bus.ub_usedma = true; sc->sc_bus.ub_hcpriv = sc; sc->sc_bus2.ub_methods = &xhci_bus_methods; sc->sc_bus2.ub_pipesize = sizeof(struct xhci_pipe); sc->sc_bus2.ub_revision = USBREV_2_0; sc->sc_bus2.ub_usedma = true; sc->sc_bus2.ub_hcpriv = sc; sc->sc_bus2.ub_dmatag = sc->sc_bus.ub_dmatag; caplength = xhci_read_1(sc, XHCI_CAPLENGTH); hciversion = xhci_read_2(sc, XHCI_HCIVERSION); if (hciversion < XHCI_HCIVERSION_0_96 || hciversion >= 0x0200) { aprint_normal_dev(sc->sc_dev, "xHCI version %x.%x not known to be supported\n", (hciversion >> 8) & 0xff, (hciversion >> 0) & 0xff); } else { aprint_verbose_dev(sc->sc_dev, "xHCI version %x.%x\n", (hciversion >> 8) & 0xff, (hciversion >> 0) & 0xff); } if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, 0, caplength, &sc->sc_cbh) != 0) { aprint_error_dev(sc->sc_dev, "capability subregion failure\n"); return ENOMEM; } hcs1 = xhci_cap_read_4(sc, XHCI_HCSPARAMS1); sc->sc_maxslots = XHCI_HCS1_MAXSLOTS(hcs1); sc->sc_maxintrs = XHCI_HCS1_MAXINTRS(hcs1); sc->sc_maxports = XHCI_HCS1_MAXPORTS(hcs1); hcs2 = xhci_cap_read_4(sc, XHCI_HCSPARAMS2); hcs3 = xhci_cap_read_4(sc, XHCI_HCSPARAMS3); aprint_debug_dev(sc->sc_dev, "hcs1=%"PRIx32" hcs2=%"PRIx32" hcs3=%"PRIx32"\n", hcs1, hcs2, hcs3); sc->sc_hcc = xhci_cap_read_4(sc, XHCI_HCCPARAMS); sc->sc_ctxsz = XHCI_HCC_CSZ(sc->sc_hcc) ? 64 : 32; char sbuf[128]; if (hciversion < XHCI_HCIVERSION_1_0) snprintb(sbuf, sizeof(sbuf), XHCI_HCCPREV1_BITS, sc->sc_hcc); else snprintb(sbuf, sizeof(sbuf), XHCI_HCCV1_x_BITS, sc->sc_hcc); aprint_debug_dev(sc->sc_dev, "hcc=%s\n", sbuf); aprint_debug_dev(sc->sc_dev, "xECP %" __PRIxBITS "\n", XHCI_HCC_XECP(sc->sc_hcc) * 4); if (hciversion >= XHCI_HCIVERSION_1_1) { sc->sc_hcc2 = xhci_cap_read_4(sc, XHCI_HCCPARAMS2); snprintb(sbuf, sizeof(sbuf), XHCI_HCC2_BITS, sc->sc_hcc2); aprint_debug_dev(sc->sc_dev, "hcc2=%s\n", sbuf); } /* default all ports to bus 0, i.e. usb 3 */ sc->sc_ctlrportbus = kmem_zalloc( howmany(sc->sc_maxports * sizeof(uint8_t), NBBY), KM_SLEEP); sc->sc_ctlrportmap = kmem_zalloc(sc->sc_maxports * sizeof(int), KM_SLEEP); /* controller port to bus roothub port map */ for (size_t j = 0; j < __arraycount(sc->sc_rhportmap); j++) { sc->sc_rhportmap[j] = kmem_zalloc(sc->sc_maxports * sizeof(int), KM_SLEEP); } /* * Process all Extended Capabilities */ xhci_ecp(sc); bsz = XHCI_PORTSC(sc->sc_maxports); if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, caplength, bsz, &sc->sc_obh) != 0) { aprint_error_dev(sc->sc_dev, "operational subregion failure\n"); return ENOMEM; } dboff = xhci_cap_read_4(sc, XHCI_DBOFF); if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, dboff, sc->sc_maxslots * 4, &sc->sc_dbh) != 0) { aprint_error_dev(sc->sc_dev, "doorbell subregion failure\n"); return ENOMEM; } rtsoff = xhci_cap_read_4(sc, XHCI_RTSOFF); if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, rtsoff, sc->sc_maxintrs * 0x20, &sc->sc_rbh) != 0) { aprint_error_dev(sc->sc_dev, "runtime subregion failure\n"); return ENOMEM; } int rv; rv = xhci_hc_reset(sc); if (rv != 0) { return rv; } if (sc->sc_vendor_init) sc->sc_vendor_init(sc); pagesize = xhci_op_read_4(sc, XHCI_PAGESIZE); aprint_debug_dev(sc->sc_dev, "PAGESIZE 0x%08x\n", pagesize); pagesize = ffs(pagesize); if (pagesize == 0) { aprint_error_dev(sc->sc_dev, "pagesize is 0\n"); return EIO; } sc->sc_pgsz = 1 << (12 + (pagesize - 1)); aprint_debug_dev(sc->sc_dev, "sc_pgsz 0x%08x\n", (uint32_t)sc->sc_pgsz); aprint_debug_dev(sc->sc_dev, "sc_maxslots 0x%08x\n", (uint32_t)sc->sc_maxslots); aprint_debug_dev(sc->sc_dev, "sc_maxports %d\n", sc->sc_maxports); int err; sc->sc_maxspbuf = XHCI_HCS2_MAXSPBUF(hcs2); aprint_debug_dev(sc->sc_dev, "sc_maxspbuf %d\n", sc->sc_maxspbuf); if (sc->sc_maxspbuf != 0) { err = usb_allocmem(sc->sc_bus.ub_dmatag, sizeof(uint64_t) * sc->sc_maxspbuf, sizeof(uint64_t), USBMALLOC_COHERENT | USBMALLOC_ZERO, &sc->sc_spbufarray_dma); if (err) { aprint_error_dev(sc->sc_dev, "spbufarray init fail, err %d\n", err); return ENOMEM; } sc->sc_spbuf_dma = kmem_zalloc(sizeof(*sc->sc_spbuf_dma) * sc->sc_maxspbuf, KM_SLEEP); uint64_t *spbufarray = KERNADDR(&sc->sc_spbufarray_dma, 0); for (i = 0; i < sc->sc_maxspbuf; i++) { usb_dma_t * const dma = &sc->sc_spbuf_dma[i]; /* allocate contexts */ err = usb_allocmem(sc->sc_bus.ub_dmatag, sc->sc_pgsz, sc->sc_pgsz, USBMALLOC_COHERENT | USBMALLOC_ZERO, dma); if (err) { aprint_error_dev(sc->sc_dev, "spbufarray_dma init fail, err %d\n", err); rv = ENOMEM; goto bad1; } spbufarray[i] = htole64(DMAADDR(dma, 0)); usb_syncmem(dma, 0, sc->sc_pgsz, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); } usb_syncmem(&sc->sc_spbufarray_dma, 0, sizeof(uint64_t) * sc->sc_maxspbuf, BUS_DMASYNC_PREWRITE); } config = xhci_op_read_4(sc, XHCI_CONFIG); config &= ~0xFF; config |= sc->sc_maxslots & 0xFF; xhci_op_write_4(sc, XHCI_CONFIG, config); err = xhci_ring_init(sc, &sc->sc_cr, XHCI_COMMAND_RING_TRBS, XHCI_COMMAND_RING_SEGMENTS_ALIGN); if (err) { aprint_error_dev(sc->sc_dev, "command ring init fail, err %d\n", err); rv = ENOMEM; goto bad1; } err = xhci_ring_init(sc, &sc->sc_er, XHCI_EVENT_RING_TRBS, XHCI_EVENT_RING_SEGMENTS_ALIGN); if (err) { aprint_error_dev(sc->sc_dev, "event ring init fail, err %d\n", err); rv = ENOMEM; goto bad2; } usb_dma_t *dma; size_t size; size_t align; dma = &sc->sc_eventst_dma; size = roundup2(XHCI_EVENT_RING_SEGMENTS * XHCI_ERSTE_SIZE, XHCI_EVENT_RING_SEGMENT_TABLE_ALIGN); KASSERTMSG(size <= (512 * 1024), "eventst size %zu too large", size); align = XHCI_EVENT_RING_SEGMENT_TABLE_ALIGN; err = usb_allocmem(sc->sc_bus.ub_dmatag, size, align, USBMALLOC_COHERENT | USBMALLOC_ZERO, dma); if (err) { aprint_error_dev(sc->sc_dev, "eventst init fail, err %d\n", err); rv = ENOMEM; goto bad3; } aprint_debug_dev(sc->sc_dev, "eventst: 0x%016jx %p %zx\n", (uintmax_t)DMAADDR(&sc->sc_eventst_dma, 0), KERNADDR(&sc->sc_eventst_dma, 0), sc->sc_eventst_dma.udma_block->size); dma = &sc->sc_dcbaa_dma; size = (1 + sc->sc_maxslots) * sizeof(uint64_t); KASSERTMSG(size <= 2048, "dcbaa size %zu too large", size); align = XHCI_DEVICE_CONTEXT_BASE_ADDRESS_ARRAY_ALIGN; err = usb_allocmem(sc->sc_bus.ub_dmatag, size, align, USBMALLOC_COHERENT | USBMALLOC_ZERO, dma); if (err) { aprint_error_dev(sc->sc_dev, "dcbaa init fail, err %d\n", err); rv = ENOMEM; goto bad4; } aprint_debug_dev(sc->sc_dev, "dcbaa: 0x%016jx %p %zx\n", (uintmax_t)DMAADDR(&sc->sc_dcbaa_dma, 0), KERNADDR(&sc->sc_dcbaa_dma, 0), sc->sc_dcbaa_dma.udma_block->size); if (sc->sc_maxspbuf != 0) { /* * DCBA entry 0 hold the scratchbuf array pointer. */ *(uint64_t *)KERNADDR(dma, 0) = htole64(DMAADDR(&sc->sc_spbufarray_dma, 0)); usb_syncmem(dma, 0, size, BUS_DMASYNC_PREWRITE); } sc->sc_slots = kmem_zalloc(sizeof(*sc->sc_slots) * sc->sc_maxslots, KM_SLEEP); if (sc->sc_slots == NULL) { aprint_error_dev(sc->sc_dev, "slots init fail, err %d\n", err); rv = ENOMEM; goto bad; } sc->sc_xferpool = pool_cache_init(sizeof(struct xhci_xfer), 0, 0, 0, "xhcixfer", NULL, IPL_USB, NULL, NULL, NULL); if (sc->sc_xferpool == NULL) { aprint_error_dev(sc->sc_dev, "pool_cache init fail, err %d\n", err); rv = ENOMEM; goto bad; } cv_init(&sc->sc_command_cv, "xhcicmd"); cv_init(&sc->sc_cmdbusy_cv, "xhcicmdq"); mutex_init(&sc->sc_rhlock, MUTEX_DEFAULT, IPL_NONE); mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTUSB); mutex_init(&sc->sc_intr_lock, MUTEX_DEFAULT, IPL_USB); struct xhci_erste *erst; erst = KERNADDR(&sc->sc_eventst_dma, 0); erst[0].erste_0 = htole64(xhci_ring_trbp(sc->sc_er, 0)); erst[0].erste_2 = htole32(sc->sc_er->xr_ntrb); erst[0].erste_3 = htole32(0); usb_syncmem(&sc->sc_eventst_dma, 0, XHCI_ERSTE_SIZE * XHCI_EVENT_RING_SEGMENTS, BUS_DMASYNC_PREWRITE); xhci_rt_write_4(sc, XHCI_ERSTSZ(0), XHCI_EVENT_RING_SEGMENTS); xhci_rt_write_8(sc, XHCI_ERSTBA(0), DMAADDR(&sc->sc_eventst_dma, 0)); xhci_rt_write_8(sc, XHCI_ERDP(0), xhci_ring_trbp(sc->sc_er, 0) | XHCI_ERDP_BUSY); xhci_op_write_8(sc, XHCI_DCBAAP, DMAADDR(&sc->sc_dcbaa_dma, 0)); xhci_op_write_8(sc, XHCI_CRCR, xhci_ring_trbp(sc->sc_cr, 0) | sc->sc_cr->xr_cs); HEXDUMP("eventst", KERNADDR(&sc->sc_eventst_dma, 0), XHCI_ERSTE_SIZE * XHCI_EVENT_RING_SEGMENTS); if ((sc->sc_quirks & XHCI_DEFERRED_START) == 0) xhci_start(sc); return 0; bad: if (sc->sc_xferpool) { pool_cache_destroy(sc->sc_xferpool); sc->sc_xferpool = NULL; } if (sc->sc_slots) { kmem_free(sc->sc_slots, sizeof(*sc->sc_slots) * sc->sc_maxslots); sc->sc_slots = NULL; } usb_freemem(&sc->sc_dcbaa_dma); bad4: usb_freemem(&sc->sc_eventst_dma); bad3: xhci_ring_free(sc, &sc->sc_er); bad2: xhci_ring_free(sc, &sc->sc_cr); i = sc->sc_maxspbuf; bad1: for (int j = 0; j < i; j++) usb_freemem(&sc->sc_spbuf_dma[j]); usb_freemem(&sc->sc_spbufarray_dma); return rv; } static inline bool xhci_polling_p(struct xhci_softc * const sc) { return sc->sc_bus.ub_usepolling || sc->sc_bus2.ub_usepolling; } int xhci_intr(void *v) { struct xhci_softc * const sc = v; int ret = 0; XHCIHIST_FUNC(); XHCIHIST_CALLED(); if (sc == NULL) return 0; mutex_spin_enter(&sc->sc_intr_lock); if (sc->sc_dying || !device_has_power(sc->sc_dev)) goto done; /* If we get an interrupt while polling, then just ignore it. */ if (xhci_polling_p(sc)) { #ifdef DIAGNOSTIC DPRINTFN(16, "ignored interrupt while polling", 0, 0, 0, 0); #endif goto done; } ret = xhci_intr1(sc); if (ret) { KASSERT(sc->sc_child || sc->sc_child2); /* * One of child busses could be already detached. It doesn't * matter on which of the two the softintr is scheduled. */ if (sc->sc_child) usb_schedsoftintr(&sc->sc_bus); else usb_schedsoftintr(&sc->sc_bus2); } done: mutex_spin_exit(&sc->sc_intr_lock); return ret; } int xhci_intr1(struct xhci_softc * const sc) { uint32_t usbsts; uint32_t iman; XHCIHIST_FUNC(); usbsts = xhci_op_read_4(sc, XHCI_USBSTS); XHCIHIST_CALLARGS("USBSTS 0x%08jx", usbsts, 0, 0, 0); if ((usbsts & (XHCI_STS_HSE | XHCI_STS_EINT | XHCI_STS_PCD | XHCI_STS_HCE)) == 0) { DPRINTFN(16, "ignored intr not for %jd", device_unit(sc->sc_dev), 0, 0, 0); return 0; } /* * Clear EINT and other transient flags, to not misenterpret * next shared interrupt. Also, to avoid race, EINT must be cleared * before XHCI_IMAN_INTR_PEND is cleared. */ xhci_op_write_4(sc, XHCI_USBSTS, usbsts & ~XHCI_STS_RSVDP0); #ifdef XHCI_DEBUG usbsts = xhci_op_read_4(sc, XHCI_USBSTS); DPRINTFN(16, "USBSTS 0x%08jx", usbsts, 0, 0, 0); #endif iman = xhci_rt_read_4(sc, XHCI_IMAN(0)); DPRINTFN(16, "IMAN0 0x%08jx", iman, 0, 0, 0); iman |= XHCI_IMAN_INTR_PEND; xhci_rt_write_4(sc, XHCI_IMAN(0), iman); #ifdef XHCI_DEBUG iman = xhci_rt_read_4(sc, XHCI_IMAN(0)); DPRINTFN(16, "IMAN0 0x%08jx", iman, 0, 0, 0); usbsts = xhci_op_read_4(sc, XHCI_USBSTS); DPRINTFN(16, "USBSTS 0x%08jx", usbsts, 0, 0, 0); #endif return 1; } /* * 3 port speed types used in USB stack * * usbdi speed * definition: USB_SPEED_* in usb.h * They are used in struct usbd_device in USB stack. * ioctl interface uses these values too. * port_status speed * definition: UPS_*_SPEED in usb.h * They are used in usb_port_status_t and valid only for USB 2.0. * Speed value is always 0 for Super Speed or more, and dwExtPortStatus * of usb_port_status_ext_t indicates port speed. * Note that some 3.0 values overlap with 2.0 values. * (e.g. 0x200 means UPS_POER_POWER_SS in SS and * means UPS_LOW_SPEED in HS.) * port status returned from hub also uses these values. * On NetBSD UPS_OTHER_SPEED indicates port speed is super speed * or more. * xspeed: * definition: Protocol Speed ID (PSI) (xHCI 1.1 7.2.1) * They are used in only slot context and PORTSC reg of xhci. * The difference between usbdi speed and xspeed is * that FS and LS values are swapped. */ /* convert usbdi speed to xspeed */ static int xhci_speed2xspeed(int speed) { switch (speed) { case USB_SPEED_LOW: return 2; case USB_SPEED_FULL: return 1; default: return speed; } } #if 0 /* convert xspeed to usbdi speed */ static int xhci_xspeed2speed(int xspeed) { switch (xspeed) { case 1: return USB_SPEED_FULL; case 2: return USB_SPEED_LOW; default: return xspeed; } } #endif /* convert xspeed to port status speed */ static int xhci_xspeed2psspeed(int xspeed) { switch (xspeed) { case 0: return 0; case 1: return UPS_FULL_SPEED; case 2: return UPS_LOW_SPEED; case 3: return UPS_HIGH_SPEED; default: return UPS_OTHER_SPEED; } } /* * Construct input contexts and issue TRB to open pipe. */ static usbd_status xhci_configure_endpoint(struct usbd_pipe *pipe) { struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; #ifdef USB_DEBUG const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); #endif struct xhci_soft_trb trb; usbd_status err; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("slot %ju dci %ju epaddr 0x%02jx attr 0x%02jx", xs->xs_idx, dci, pipe->up_endpoint->ue_edesc->bEndpointAddress, pipe->up_endpoint->ue_edesc->bmAttributes); /* XXX ensure input context is available? */ memset(xhci_slot_get_icv(sc, xs, 0), 0, sc->sc_pgsz); /* set up context */ xhci_setup_ctx(pipe); HEXDUMP("input control context", xhci_slot_get_icv(sc, xs, 0), sc->sc_ctxsz * 1); HEXDUMP("input endpoint context", xhci_slot_get_icv(sc, xs, xhci_dci_to_ici(dci)), sc->sc_ctxsz * 1); trb.trb_0 = xhci_slot_get_icp(sc, xs, 0); trb.trb_2 = 0; trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_CONFIGURE_EP); err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); usb_syncmem(&xs->xs_dc_dma, 0, sc->sc_pgsz, BUS_DMASYNC_POSTREAD); HEXDUMP("output context", xhci_slot_get_dcv(sc, xs, dci), sc->sc_ctxsz * 1); return err; } #if 0 static usbd_status xhci_unconfigure_endpoint(struct usbd_pipe *pipe) { #ifdef USB_DEBUG struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; #endif XHCIHIST_FUNC(); XHCIHIST_CALLARGS("slot %ju", xs->xs_idx, 0, 0, 0); return USBD_NORMAL_COMPLETION; } #endif /* 4.6.8, 6.4.3.7 */ static void xhci_reset_endpoint(struct usbd_pipe *pipe) { struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); struct xhci_soft_trb trb; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("slot %ju dci %ju", xs->xs_idx, dci, 0, 0); KASSERT(mutex_owned(&sc->sc_lock)); trb.trb_0 = 0; trb.trb_2 = 0; trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | XHCI_TRB_3_EP_SET(dci) | XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_RESET_EP); if (xhci_do_command_locked(sc, &trb, USBD_DEFAULT_TIMEOUT)) { device_printf(sc->sc_dev, "%s: endpoint 0x%x: timed out\n", __func__, pipe->up_endpoint->ue_edesc->bEndpointAddress); } } /* * 4.6.9, 6.4.3.8 * Stop execution of TDs on xfer ring. * Should be called with sc_lock held. */ static usbd_status xhci_stop_endpoint_cmd(struct xhci_softc *sc, struct xhci_slot *xs, u_int dci, uint32_t trb3flags) { struct xhci_soft_trb trb; usbd_status err; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("slot %ju dci %ju", xs->xs_idx, dci, 0, 0); KASSERT(mutex_owned(&sc->sc_lock)); trb.trb_0 = 0; trb.trb_2 = 0; trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | XHCI_TRB_3_EP_SET(dci) | XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_STOP_EP) | trb3flags; err = xhci_do_command_locked(sc, &trb, USBD_DEFAULT_TIMEOUT); return err; } static usbd_status xhci_stop_endpoint(struct usbd_pipe *pipe) { struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); XHCIHIST_FUNC(); XHCIHIST_CALLARGS("slot %ju dci %ju", xs->xs_idx, dci, 0, 0); KASSERT(mutex_owned(&sc->sc_lock)); return xhci_stop_endpoint_cmd(sc, xs, dci, 0); } /* * Set TR Dequeue Pointer. * xHCI 1.1 4.6.10 6.4.3.9 * Purge all of the TRBs on ring and reinitialize ring. * Set TR dequeue Pointer to 0 and Cycle State to 1. * EPSTATE of endpoint must be ERROR or STOPPED, otherwise CONTEXT_STATE * error will be generated. */ static void xhci_set_dequeue(struct usbd_pipe *pipe) { struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); struct xhci_ring * const xr = xs->xs_xr[dci]; struct xhci_soft_trb trb; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("slot %ju dci %ju", xs->xs_idx, dci, 0, 0); KASSERT(mutex_owned(&sc->sc_lock)); KASSERT(xr != NULL); xhci_host_dequeue(xr); /* set DCS */ trb.trb_0 = xhci_ring_trbp(xr, 0) | 1; /* XXX */ trb.trb_2 = 0; trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | XHCI_TRB_3_EP_SET(dci) | XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_SET_TR_DEQUEUE); if (xhci_do_command_locked(sc, &trb, USBD_DEFAULT_TIMEOUT)) { device_printf(sc->sc_dev, "%s: endpoint 0x%x: timed out\n", __func__, pipe->up_endpoint->ue_edesc->bEndpointAddress); } } /* * Open new pipe: called from usbd_setup_pipe_flags. * Fills methods of pipe. * If pipe is not for ep0, calls configure_endpoint. */ static usbd_status xhci_open(struct usbd_pipe *pipe) { struct usbd_device * const dev = pipe->up_dev; struct xhci_pipe * const xpipe = (struct xhci_pipe *)pipe; struct xhci_softc * const sc = XHCI_BUS2SC(dev->ud_bus); struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; usb_endpoint_descriptor_t * const ed = pipe->up_endpoint->ue_edesc; const u_int dci = xhci_ep_get_dci(ed); const uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes); usbd_status err; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("addr %jd depth %jd port %jd speed %jd", dev->ud_addr, dev->ud_depth, dev->ud_powersrc->up_portno, dev->ud_speed); DPRINTFN(1, " dci %ju type 0x%02jx epaddr 0x%02jx attr 0x%02jx", xhci_ep_get_dci(ed), ed->bDescriptorType, ed->bEndpointAddress, ed->bmAttributes); DPRINTFN(1, " mps %ju ival %ju", UGETW(ed->wMaxPacketSize), ed->bInterval, 0, 0); if (sc->sc_dying) return USBD_IOERROR; /* Root Hub */ if (dev->ud_depth == 0 && dev->ud_powersrc->up_portno == 0) { switch (ed->bEndpointAddress) { case USB_CONTROL_ENDPOINT: pipe->up_methods = &roothub_ctrl_methods; break; case UE_DIR_IN | USBROOTHUB_INTR_ENDPT: pipe->up_methods = &xhci_root_intr_methods; break; default: pipe->up_methods = NULL; DPRINTFN(0, "bad bEndpointAddress 0x%02jx", ed->bEndpointAddress, 0, 0, 0); return USBD_INVAL; } return USBD_NORMAL_COMPLETION; } usb_init_task(&xpipe->xp_async_task, xhci_pipe_restart_async_task, pipe, USB_TASKQ_MPSAFE); switch (xfertype) { case UE_CONTROL: pipe->up_methods = &xhci_device_ctrl_methods; break; case UE_ISOCHRONOUS: pipe->up_methods = &xhci_device_isoc_methods; pipe->up_serialise = false; xpipe->xp_isoc_next = -1; break; case UE_BULK: pipe->up_methods = &xhci_device_bulk_methods; break; case UE_INTERRUPT: pipe->up_methods = &xhci_device_intr_methods; break; default: return USBD_IOERROR; break; } KASSERT(xs != NULL); KASSERT(xs->xs_xr[dci] == NULL); /* allocate transfer ring */ err = xhci_ring_init(sc, &xs->xs_xr[dci], XHCI_TRANSFER_RING_TRBS, XHCI_TRB_ALIGN); if (err) { DPRINTFN(1, "ring alloc failed %jd", err, 0, 0, 0); return err; } if (ed->bEndpointAddress != USB_CONTROL_ENDPOINT) return xhci_configure_endpoint(pipe); return USBD_NORMAL_COMPLETION; } /* * Closes pipe, called from usbd_kill_pipe via close methods. * If the endpoint to be closed is ep0, disable_slot. * Should be called with sc_lock held. */ static void xhci_close_pipe(struct usbd_pipe *pipe) { struct xhci_pipe * const xp = container_of(pipe, struct xhci_pipe, xp_pipe); struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; usb_endpoint_descriptor_t * const ed = pipe->up_endpoint->ue_edesc; const u_int dci = xhci_ep_get_dci(ed); struct xhci_soft_trb trb; uint32_t *cp; XHCIHIST_FUNC(); usb_rem_task_wait(pipe->up_dev, &xp->xp_async_task, USB_TASKQ_HC, &sc->sc_lock); if (sc->sc_dying) return; /* xs is uninitialized before xhci_init_slot */ if (xs == NULL || xs->xs_idx == 0) return; XHCIHIST_CALLARGS("pipe %#jx slot %ju dci %ju", (uintptr_t)pipe, xs->xs_idx, dci, 0); KASSERTMSG(!cpu_intr_p() && !cpu_softintr_p(), "called from intr ctx"); KASSERT(mutex_owned(&sc->sc_lock)); if (pipe->up_dev->ud_depth == 0) return; if (dci == XHCI_DCI_EP_CONTROL) { DPRINTFN(4, "closing ep0", 0, 0, 0, 0); /* This frees all rings */ xhci_disable_slot(sc, xs->xs_idx); return; } if (xhci_get_epstate(sc, xs, dci) != XHCI_EPSTATE_STOPPED) (void)xhci_stop_endpoint(pipe); /* * set appropriate bit to be dropped. * don't set DC bit to 1, otherwise all endpoints * would be deconfigured. */ cp = xhci_slot_get_icv(sc, xs, XHCI_ICI_INPUT_CONTROL); cp[0] = htole32(XHCI_INCTX_0_DROP_MASK(dci)); cp[1] = htole32(0); /* XXX should be most significant one, not dci? */ cp = xhci_slot_get_icv(sc, xs, xhci_dci_to_ici(XHCI_DCI_SLOT)); cp[0] = htole32(XHCI_SCTX_0_CTX_NUM_SET(dci)); /* configure ep context performs an implicit dequeue */ xhci_host_dequeue(xs->xs_xr[dci]); /* sync input contexts before they are read from memory */ usb_syncmem(&xs->xs_ic_dma, 0, sc->sc_pgsz, BUS_DMASYNC_PREWRITE); trb.trb_0 = xhci_slot_get_icp(sc, xs, 0); trb.trb_2 = 0; trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_CONFIGURE_EP); (void)xhci_do_command_locked(sc, &trb, USBD_DEFAULT_TIMEOUT); usb_syncmem(&xs->xs_dc_dma, 0, sc->sc_pgsz, BUS_DMASYNC_POSTREAD); xhci_ring_free(sc, &xs->xs_xr[dci]); xs->xs_xr[dci] = NULL; } /* * Abort transfer. Must be called with sc_lock held. Releases and * reacquires sc_lock to sleep until hardware acknowledges abort. */ static void xhci_abortx(struct usbd_xfer *xfer) { XHCIHIST_FUNC(); struct xhci_softc * const sc = XHCI_XFER2SC(xfer); XHCIHIST_CALLARGS("xfer %#jx pipe %#jx", (uintptr_t)xfer, (uintptr_t)xfer->ux_pipe, 0, 0); KASSERT(mutex_owned(&sc->sc_lock)); KASSERTMSG((xfer->ux_status == USBD_CANCELLED || xfer->ux_status == USBD_TIMEOUT), "bad abort status: %d", xfer->ux_status); xhci_pipe_restart(xfer->ux_pipe); DPRINTFN(14, "end", 0, 0, 0, 0); } static void xhci_host_dequeue(struct xhci_ring * const xr) { /* When dequeueing the controller, update our struct copy too */ memset(xr->xr_trb, 0, xr->xr_ntrb * XHCI_TRB_SIZE); usb_syncmem(&xr->xr_dma, 0, xr->xr_ntrb * XHCI_TRB_SIZE, BUS_DMASYNC_PREWRITE); memset(xr->xr_cookies, 0, xr->xr_ntrb * sizeof(*xr->xr_cookies)); xr->xr_ep = 0; xr->xr_cs = 1; } /* * Recover STALLed endpoint, or stop endpoint to abort a pipe. * xHCI 1.1 sect 4.10.2.1 * Issue RESET_EP to recover halt condition and SET_TR_DEQUEUE to remove * all transfers on transfer ring. */ static void xhci_pipe_restart(struct usbd_pipe *pipe) { struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); XHCIHIST_FUNC(); XHCIHIST_CALLARGS("pipe %#jx slot %ju dci %ju", (uintptr_t)pipe, xs->xs_idx, dci, 0); KASSERT(xhci_polling_p(sc) || mutex_owned(&sc->sc_lock)); /* * - If the endpoint is halted, indicating a stall, reset it. * - If the endpoint is stopped, we're already good. * - Otherwise, someone wanted to abort the pipe, so stop the * endpoint. * * In any case, clear the ring. */ switch (xhci_get_epstate(sc, xs, dci)) { case XHCI_EPSTATE_HALTED: xhci_reset_endpoint(pipe); break; case XHCI_EPSTATE_STOPPED: break; default: xhci_stop_endpoint(pipe); break; } switch (xhci_get_epstate(sc, xs, dci)) { case XHCI_EPSTATE_STOPPED: break; case XHCI_EPSTATE_ERROR: device_printf(sc->sc_dev, "endpoint 0x%x error\n", pipe->up_endpoint->ue_edesc->bEndpointAddress); break; default: device_printf(sc->sc_dev, "endpoint 0x%x failed to stop\n", pipe->up_endpoint->ue_edesc->bEndpointAddress); } xhci_set_dequeue(pipe); DPRINTFN(4, "ends", 0, 0, 0, 0); } static void xhci_pipe_restart_async_task(void *cookie) { struct usbd_pipe * const pipe = cookie; struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); struct xhci_ring * const tr = xs->xs_xr[dci]; struct usbd_xfer *xfer; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("sc=%#jx pipe=%#jx", (uintptr_t)sc, (uintptr_t)pipe, 0, 0); mutex_enter(&sc->sc_lock); xhci_pipe_restart(pipe); /* * We halted our own queue because it stalled. Mark it no * longer halted and start issuing queued transfers again. */ tr->is_halted = false; xfer = SIMPLEQ_FIRST(&pipe->up_queue); if (xfer) { /* * If the first xfer of the queue is not in progress, * though, there may be a concurrent software abort * that has already cancelled it and is now in the * middle of a concurrent xhci_pipe_restart waiting to * reacquire the pipe (bus) lock. So only restart the * xfer if it's still USBD_IN_PROGRESS. * * Either way, xfers on the queue can't be in * USBD_NOT_STARTED. */ KASSERT(xfer->ux_status != USBD_NOT_STARTED); if (xfer->ux_status == USBD_IN_PROGRESS) { (*pipe->up_methods->upm_start)(xfer); } else { DPRINTF("pipe restart race xfer=%#jx status=%jd", (uintptr_t)xfer, xfer->ux_status, 0, 0); } } mutex_exit(&sc->sc_lock); } static void xhci_pipe_restart_async(struct usbd_pipe *pipe) { struct xhci_pipe * const xp = container_of(pipe, struct xhci_pipe, xp_pipe); struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); struct xhci_ring * const tr = xs->xs_xr[dci]; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("pipe %#jx", (uintptr_t)pipe, 0, 0, 0); KASSERT(xhci_polling_p(sc) || mutex_owned(&sc->sc_lock)); tr->is_halted = true; usb_add_task(pipe->up_dev, &xp->xp_async_task, USB_TASKQ_HC); DPRINTFN(4, "ends", 0, 0, 0, 0); } /* Process roothub port status/change events and notify to uhub_intr. */ static void xhci_rhpsc(struct xhci_softc * const sc, u_int ctlrport) { XHCIHIST_FUNC(); XHCIHIST_CALLARGS("xhci%jd: port %ju status change", device_unit(sc->sc_dev), ctlrport, 0, 0); if (ctlrport > sc->sc_maxports) return; const size_t bn = xhci_ctlrport2bus(sc, ctlrport); const size_t rhp = xhci_ctlrport2rhport(sc, ctlrport); struct usbd_xfer * const xfer = sc->sc_intrxfer[bn]; DPRINTFN(4, "xhci%jd: bus %jd bp %ju xfer %#jx status change", device_unit(sc->sc_dev), bn, rhp, (uintptr_t)xfer); if (xfer == NULL) return; KASSERT(xfer->ux_status == USBD_IN_PROGRESS); uint8_t *p = xfer->ux_buf; if (!xhci_polling_p(sc) || !sc->sc_intrxfer_deferred[bn]) memset(p, 0, xfer->ux_length); p[rhp / NBBY] |= 1 << (rhp % NBBY); xfer->ux_actlen = xfer->ux_length; xfer->ux_status = USBD_NORMAL_COMPLETION; if (xhci_polling_p(sc)) sc->sc_intrxfer_deferred[bn] = true; else usb_transfer_complete(xfer); } /* Process Transfer Events */ static void xhci_event_transfer(struct xhci_softc * const sc, const struct xhci_trb * const trb) { uint64_t trb_0; uint32_t trb_2, trb_3; uint8_t trbcode; u_int slot, dci; struct xhci_slot *xs; struct xhci_ring *xr; struct xhci_xfer *xx; struct usbd_xfer *xfer; usbd_status err; XHCIHIST_FUNC(); XHCIHIST_CALLED(); trb_0 = le64toh(trb->trb_0); trb_2 = le32toh(trb->trb_2); trb_3 = le32toh(trb->trb_3); trbcode = XHCI_TRB_2_ERROR_GET(trb_2); slot = XHCI_TRB_3_SLOT_GET(trb_3); dci = XHCI_TRB_3_EP_GET(trb_3); xs = &sc->sc_slots[slot]; xr = xs->xs_xr[dci]; /* sanity check */ KASSERT(xr != NULL); KASSERTMSG(xs->xs_idx != 0 && xs->xs_idx <= sc->sc_maxslots, "invalid xs_idx %u slot %u", xs->xs_idx, slot); int idx = 0; if ((trb_3 & XHCI_TRB_3_ED_BIT) == 0) { if (xhci_trb_get_idx(xr, trb_0, &idx)) { DPRINTFN(0, "invalid trb_0 %#jx", trb_0, 0, 0, 0); return; } xx = xr->xr_cookies[idx]; /* clear cookie of consumed TRB */ xr->xr_cookies[idx] = NULL; /* * xx is NULL if pipe is opened but xfer is not started. * It happens when stopping idle pipe. */ if (xx == NULL || trbcode == XHCI_TRB_ERROR_LENGTH) { DPRINTFN(1, "Ignore #%ju: cookie %#jx cc %ju dci %ju", idx, (uintptr_t)xx, trbcode, dci); DPRINTFN(1, " orig TRB %#jx type %ju", trb_0, XHCI_TRB_3_TYPE_GET(le32toh(xr->xr_trb[idx].trb_3)), 0, 0); return; } } else { /* When ED != 0, trb_0 is virtual addr of struct xhci_xfer. */ xx = (void *)(uintptr_t)(trb_0 & ~0x3); } /* XXX this may not happen */ if (xx == NULL) { DPRINTFN(1, "xfer done: xx is NULL", 0, 0, 0, 0); return; } xfer = &xx->xx_xfer; /* XXX this may happen when detaching */ if (xfer == NULL) { DPRINTFN(1, "xx(%#jx)->xx_xfer is NULL trb_0 %#jx", (uintptr_t)xx, trb_0, 0, 0); return; } DPRINTFN(14, "xfer %#jx", (uintptr_t)xfer, 0, 0, 0); /* XXX I dunno why this happens */ KASSERTMSG(xfer->ux_pipe != NULL, "xfer(%p)->ux_pipe is NULL", xfer); if (!xfer->ux_pipe->up_repeat && SIMPLEQ_EMPTY(&xfer->ux_pipe->up_queue)) { DPRINTFN(1, "xfer(%#jx)->pipe not queued", (uintptr_t)xfer, 0, 0, 0); return; } const uint8_t xfertype = UE_GET_XFERTYPE(xfer->ux_pipe->up_endpoint->ue_edesc->bmAttributes); /* 4.11.5.2 Event Data TRB */ if ((trb_3 & XHCI_TRB_3_ED_BIT) != 0) { DPRINTFN(14, "transfer Event Data: 0x%016jx 0x%08jx" " %02jx", trb_0, XHCI_TRB_2_REM_GET(trb_2), trbcode, 0); if ((trb_0 & 0x3) == 0x3) { xfer->ux_actlen = XHCI_TRB_2_REM_GET(trb_2); } } switch (trbcode) { case XHCI_TRB_ERROR_SHORT_PKT: case XHCI_TRB_ERROR_SUCCESS: /* * A ctrl transfer can generate two events if it has a Data * stage. A short data stage can be OK and should not * complete the transfer as the status stage needs to be * performed. * * Note: Data and Status stage events point at same xfer. * ux_actlen and ux_dmabuf will be passed to * usb_transfer_complete after the Status stage event. * * It can be distinguished which stage generates the event: * + by checking least 3 bits of trb_0 if ED==1. * (see xhci_device_ctrl_start). * + by checking the type of original TRB if ED==0. * * In addition, intr, bulk, and isoc transfer currently * consists of single TD, so the "skip" is not needed. * ctrl xfer uses EVENT_DATA, and others do not. * Thus driver can switch the flow by checking ED bit. */ if (xfertype == UE_ISOCHRONOUS) { xfer->ux_frlengths[xx->xx_isoc_done] -= XHCI_TRB_2_REM_GET(trb_2); xfer->ux_actlen += xfer->ux_frlengths[xx->xx_isoc_done]; } else if ((trb_3 & XHCI_TRB_3_ED_BIT) == 0) { if (xfer->ux_actlen == 0) xfer->ux_actlen = xfer->ux_length - XHCI_TRB_2_REM_GET(trb_2); if (XHCI_TRB_3_TYPE_GET(le32toh(xr->xr_trb[idx].trb_3)) == XHCI_TRB_TYPE_DATA_STAGE) { return; } } else if ((trb_0 & 0x3) == 0x3) { return; } err = USBD_NORMAL_COMPLETION; break; case XHCI_TRB_ERROR_STOPPED: case XHCI_TRB_ERROR_LENGTH: case XHCI_TRB_ERROR_STOPPED_SHORT: err = USBD_IOERROR; break; case XHCI_TRB_ERROR_STALL: case XHCI_TRB_ERROR_BABBLE: DPRINTFN(1, "ERR %ju slot %ju dci %ju", trbcode, slot, dci, 0); xhci_pipe_restart_async(xfer->ux_pipe); err = USBD_STALLED; break; default: DPRINTFN(1, "ERR %ju slot %ju dci %ju", trbcode, slot, dci, 0); err = USBD_IOERROR; break; } if (xfertype == UE_ISOCHRONOUS) { switch (trbcode) { case XHCI_TRB_ERROR_SHORT_PKT: case XHCI_TRB_ERROR_SUCCESS: break; case XHCI_TRB_ERROR_MISSED_SERVICE: case XHCI_TRB_ERROR_RING_UNDERRUN: case XHCI_TRB_ERROR_RING_OVERRUN: default: xfer->ux_frlengths[xx->xx_isoc_done] = 0; break; } if (++xx->xx_isoc_done < xfer->ux_nframes) return; } if ((trb_3 & XHCI_TRB_3_ED_BIT) == 0 || (trb_0 & 0x3) == 0x0) { /* * Try to claim this xfer for completion. If it has * already completed or aborted, drop it on the floor. */ if (!usbd_xfer_trycomplete(xfer)) return; /* Set the status. */ xfer->ux_status = err; usb_transfer_complete(xfer); } } /* Process Command complete events */ static void xhci_event_cmd(struct xhci_softc * const sc, const struct xhci_trb * const trb) { uint64_t trb_0; uint32_t trb_2, trb_3; XHCIHIST_FUNC(); XHCIHIST_CALLED(); KASSERT(mutex_owned(&sc->sc_lock)); trb_0 = le64toh(trb->trb_0); trb_2 = le32toh(trb->trb_2); trb_3 = le32toh(trb->trb_3); if (trb_0 == sc->sc_command_addr) { sc->sc_resultpending = false; sc->sc_result_trb.trb_0 = trb_0; sc->sc_result_trb.trb_2 = trb_2; sc->sc_result_trb.trb_3 = trb_3; if (XHCI_TRB_2_ERROR_GET(trb_2) != XHCI_TRB_ERROR_SUCCESS) { DPRINTFN(1, "command completion " "failure: 0x%016jx 0x%08jx 0x%08jx", trb_0, trb_2, trb_3, 0); } cv_signal(&sc->sc_command_cv); } else { DPRINTFN(1, "spurious event: %#jx 0x%016jx " "0x%08jx 0x%08jx", (uintptr_t)trb, trb_0, trb_2, trb_3); } } /* * Process events. * called from xhci_softintr */ static void xhci_handle_event(struct xhci_softc * const sc, const struct xhci_trb * const trb) { uint64_t trb_0; uint32_t trb_2, trb_3; XHCIHIST_FUNC(); trb_0 = le64toh(trb->trb_0); trb_2 = le32toh(trb->trb_2); trb_3 = le32toh(trb->trb_3); XHCIHIST_CALLARGS("event: %#jx 0x%016jx 0x%08jx 0x%08jx", (uintptr_t)trb, trb_0, trb_2, trb_3); /* * 4.11.3.1, 6.4.2.1 * TRB Pointer is invalid for these completion codes. */ switch (XHCI_TRB_2_ERROR_GET(trb_2)) { case XHCI_TRB_ERROR_RING_UNDERRUN: case XHCI_TRB_ERROR_RING_OVERRUN: case XHCI_TRB_ERROR_VF_RING_FULL: return; default: if (trb_0 == 0) { return; } break; } switch (XHCI_TRB_3_TYPE_GET(trb_3)) { case XHCI_TRB_EVENT_TRANSFER: xhci_event_transfer(sc, trb); break; case XHCI_TRB_EVENT_CMD_COMPLETE: xhci_event_cmd(sc, trb); break; case XHCI_TRB_EVENT_PORT_STS_CHANGE: xhci_rhpsc(sc, (uint32_t)((trb_0 >> 24) & 0xff)); break; default: break; } } static void xhci_softintr(void *v) { struct usbd_bus * const bus = v; struct xhci_softc * const sc = XHCI_BUS2SC(bus); struct xhci_ring * const er = sc->sc_er; struct xhci_trb *trb; int i, j, k, bn; XHCIHIST_FUNC(); KASSERT(xhci_polling_p(sc) || mutex_owned(&sc->sc_lock)); i = er->xr_ep; j = er->xr_cs; XHCIHIST_CALLARGS("er: xr_ep %jd xr_cs %jd", i, j, 0, 0); /* * Handle deferred root intr xfer, in case we just switched off * polling. It's not safe to complete root intr xfers while * polling -- too much kernel machinery gets involved. */ if (!xhci_polling_p(sc)) { for (bn = 0; bn < 2; bn++) { if (__predict_false(sc->sc_intrxfer_deferred[bn])) { sc->sc_intrxfer_deferred[bn] = false; usb_transfer_complete(sc->sc_intrxfer[bn]); } } } while (1) { usb_syncmem(&er->xr_dma, XHCI_TRB_SIZE * i, XHCI_TRB_SIZE, BUS_DMASYNC_POSTREAD); trb = &er->xr_trb[i]; k = (le32toh(trb->trb_3) & XHCI_TRB_3_CYCLE_BIT) ? 1 : 0; if (j != k) break; xhci_handle_event(sc, trb); i++; if (i == er->xr_ntrb) { i = 0; j ^= 1; } } er->xr_ep = i; er->xr_cs = j; xhci_rt_write_8(sc, XHCI_ERDP(0), xhci_ring_trbp(er, er->xr_ep) | XHCI_ERDP_BUSY); DPRINTFN(16, "ends", 0, 0, 0, 0); return; } static void xhci_poll(struct usbd_bus *bus) { struct xhci_softc * const sc = XHCI_BUS2SC(bus); XHCIHIST_FUNC(); XHCIHIST_CALLED(); mutex_enter(&sc->sc_intr_lock); int ret = xhci_intr1(sc); if (ret) { xhci_softintr(bus); } mutex_exit(&sc->sc_intr_lock); return; } static struct usbd_xfer * xhci_allocx(struct usbd_bus *bus, unsigned int nframes) { struct xhci_softc * const sc = XHCI_BUS2SC(bus); struct xhci_xfer *xx; u_int ntrbs; XHCIHIST_FUNC(); XHCIHIST_CALLED(); ntrbs = uimax(3, nframes); const size_t trbsz = sizeof(*xx->xx_trb) * ntrbs; xx = pool_cache_get(sc->sc_xferpool, PR_WAITOK); if (xx != NULL) { memset(xx, 0, sizeof(*xx)); if (ntrbs > 0) { xx->xx_trb = kmem_alloc(trbsz, KM_SLEEP); xx->xx_ntrb = ntrbs; } #ifdef DIAGNOSTIC xx->xx_xfer.ux_state = XFER_BUSY; #endif } return &xx->xx_xfer; } static void xhci_freex(struct usbd_bus *bus, struct usbd_xfer *xfer) { struct xhci_softc * const sc = XHCI_BUS2SC(bus); struct xhci_xfer * const xx = XHCI_XFER2XXFER(xfer); XHCIHIST_FUNC(); XHCIHIST_CALLED(); #ifdef DIAGNOSTIC if (xfer->ux_state != XFER_BUSY && xfer->ux_status != USBD_NOT_STARTED) { DPRINTFN(0, "xfer=%#jx not busy, 0x%08jx", (uintptr_t)xfer, xfer->ux_state, 0, 0); } xfer->ux_state = XFER_FREE; #endif if (xx->xx_ntrb > 0) { kmem_free(xx->xx_trb, xx->xx_ntrb * sizeof(*xx->xx_trb)); xx->xx_trb = NULL; xx->xx_ntrb = 0; } pool_cache_put(sc->sc_xferpool, xx); } static bool xhci_dying(struct usbd_bus *bus) { struct xhci_softc * const sc = XHCI_BUS2SC(bus); return sc->sc_dying; } static void xhci_get_lock(struct usbd_bus *bus, kmutex_t **lock) { struct xhci_softc * const sc = XHCI_BUS2SC(bus); *lock = &sc->sc_lock; } extern uint32_t usb_cookie_no; /* * xHCI 4.3 * Called when uhub_explore finds a new device (via usbd_new_device). * Port initialization and speed detection (4.3.1) are already done in uhub.c. * This function does: * Allocate and construct dev structure of default endpoint (ep0). * Allocate and open pipe of ep0. * Enable slot and initialize slot context. * Set Address. * Read initial device descriptor. * Determine initial MaxPacketSize (mps) by speed. * Read full device descriptor. * Register this device. * Finally state of device transitions ADDRESSED. */ static usbd_status xhci_new_device(device_t parent, struct usbd_bus *bus, int depth, int speed, int port, struct usbd_port *up) { struct xhci_softc * const sc = XHCI_BUS2SC(bus); struct usbd_device *dev; usbd_status err; usb_device_descriptor_t *dd; struct xhci_slot *xs; uint32_t *cp; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("port %ju depth %ju speed %ju up %#jx", port, depth, speed, (uintptr_t)up); KASSERT(KERNEL_LOCKED_P()); dev = kmem_zalloc(sizeof(*dev), KM_SLEEP); dev->ud_bus = bus; dev->ud_quirks = &usbd_no_quirk; dev->ud_addr = 0; dev->ud_ddesc.bMaxPacketSize = 0; dev->ud_depth = depth; dev->ud_powersrc = up; dev->ud_myhub = up->up_parent; dev->ud_speed = speed; dev->ud_langid = USBD_NOLANG; dev->ud_cookie.cookie = ++usb_cookie_no; /* Set up default endpoint handle. */ dev->ud_ep0.ue_edesc = &dev->ud_ep0desc; /* doesn't matter, just don't let it uninitialized */ dev->ud_ep0.ue_toggle = 0; /* Set up default endpoint descriptor. */ dev->ud_ep0desc.bLength = USB_ENDPOINT_DESCRIPTOR_SIZE; dev->ud_ep0desc.bDescriptorType = UDESC_ENDPOINT; dev->ud_ep0desc.bEndpointAddress = USB_CONTROL_ENDPOINT; dev->ud_ep0desc.bmAttributes = UE_CONTROL; dev->ud_ep0desc.bInterval = 0; /* 4.3, 4.8.2.1 */ switch (speed) { case USB_SPEED_SUPER: case USB_SPEED_SUPER_PLUS: USETW(dev->ud_ep0desc.wMaxPacketSize, USB_3_MAX_CTRL_PACKET); break; case USB_SPEED_FULL: /* XXX using 64 as initial mps of ep0 in FS */ case USB_SPEED_HIGH: USETW(dev->ud_ep0desc.wMaxPacketSize, USB_2_MAX_CTRL_PACKET); break; case USB_SPEED_LOW: default: USETW(dev->ud_ep0desc.wMaxPacketSize, USB_MAX_IPACKET); break; } up->up_dev = dev; dd = &dev->ud_ddesc; if (depth == 0 && port == 0) { KASSERT(bus->ub_devices[USB_ROOTHUB_INDEX] == NULL); bus->ub_devices[USB_ROOTHUB_INDEX] = dev; /* Establish the default pipe. */ err = usbd_setup_pipe(dev, 0, &dev->ud_ep0, USBD_DEFAULT_INTERVAL, &dev->ud_pipe0); if (err) { DPRINTFN(1, "setup default pipe failed %jd", err,0,0,0); goto bad; } err = usbd_get_initial_ddesc(dev, dd); if (err) { DPRINTFN(1, "get_initial_ddesc %ju", err, 0, 0, 0); goto bad; } } else { uint8_t slot = 0; /* 4.3.2 */ err = xhci_enable_slot(sc, &slot); if (err) { DPRINTFN(1, "enable slot %ju", err, 0, 0, 0); goto bad; } xs = &sc->sc_slots[slot]; dev->ud_hcpriv = xs; /* 4.3.3 initialize slot structure */ err = xhci_init_slot(dev, slot); if (err) { DPRINTFN(1, "init slot %ju", err, 0, 0, 0); dev->ud_hcpriv = NULL; /* * We have to disable_slot here because * xs->xs_idx == 0 when xhci_init_slot fails, * in that case usbd_remove_dev won't work. */ mutex_enter(&sc->sc_lock); xhci_disable_slot(sc, slot); mutex_exit(&sc->sc_lock); goto bad; } /* * We have to establish the default pipe _after_ slot * structure has been prepared. */ err = usbd_setup_pipe(dev, 0, &dev->ud_ep0, USBD_DEFAULT_INTERVAL, &dev->ud_pipe0); if (err) { DPRINTFN(1, "setup default pipe failed %jd", err, 0, 0, 0); goto bad; } /* 4.3.4 Address Assignment */ err = xhci_set_address(dev, slot, false); if (err) { DPRINTFN(1, "failed! to set address: %ju", err, 0, 0, 0); goto bad; } /* Allow device time to set new address */ usbd_delay_ms(dev, USB_SET_ADDRESS_SETTLE); usb_syncmem(&xs->xs_dc_dma, 0, sc->sc_pgsz, BUS_DMASYNC_POSTREAD); cp = xhci_slot_get_dcv(sc, xs, XHCI_DCI_SLOT); HEXDUMP("slot context", cp, sc->sc_ctxsz); uint8_t addr = XHCI_SCTX_3_DEV_ADDR_GET(le32toh(cp[3])); DPRINTFN(4, "device address %ju", addr, 0, 0, 0); /* * XXX ensure we know when the hardware does something * we can't yet cope with */ KASSERTMSG(addr >= 1 && addr <= 127, "addr %d", addr); dev->ud_addr = addr; KASSERTMSG(bus->ub_devices[usb_addr2dindex(dev->ud_addr)] == NULL, "addr %d already allocated", dev->ud_addr); /* * The root hub is given its own slot */ bus->ub_devices[usb_addr2dindex(dev->ud_addr)] = dev; err = usbd_get_initial_ddesc(dev, dd); if (err) { DPRINTFN(1, "get_initial_ddesc %ju", err, 0, 0, 0); goto bad; } /* 4.8.2.1 */ if (USB_IS_SS(speed)) { if (dd->bMaxPacketSize != 9) { printf("%s: invalid mps 2^%u for SS ep0," " using 512\n", device_xname(sc->sc_dev), dd->bMaxPacketSize); dd->bMaxPacketSize = 9; } USETW(dev->ud_ep0desc.wMaxPacketSize, (1 << dd->bMaxPacketSize)); } else USETW(dev->ud_ep0desc.wMaxPacketSize, dd->bMaxPacketSize); DPRINTFN(4, "bMaxPacketSize %ju", dd->bMaxPacketSize, 0, 0, 0); err = xhci_update_ep0_mps(sc, xs, UGETW(dev->ud_ep0desc.wMaxPacketSize)); if (err) { DPRINTFN(1, "update mps of ep0 %ju", err, 0, 0, 0); goto bad; } } err = usbd_reload_device_desc(dev); if (err) { DPRINTFN(1, "reload desc %ju", err, 0, 0, 0); goto bad; } DPRINTFN(1, "adding unit addr=%jd, rev=%02jx,", dev->ud_addr, UGETW(dd->bcdUSB), 0, 0); DPRINTFN(1, " class=%jd, subclass=%jd, protocol=%jd,", dd->bDeviceClass, dd->bDeviceSubClass, dd->bDeviceProtocol, 0); DPRINTFN(1, " mps=%jd, len=%jd, noconf=%jd, speed=%jd", dd->bMaxPacketSize, dd->bLength, dd->bNumConfigurations, dev->ud_speed); usbd_get_device_strings(dev); usbd_add_dev_event(USB_EVENT_DEVICE_ATTACH, dev); if (depth == 0 && port == 0) { usbd_attach_roothub(parent, dev); DPRINTFN(1, "root hub %#jx", (uintptr_t)dev, 0, 0, 0); return USBD_NORMAL_COMPLETION; } err = usbd_probe_and_attach(parent, dev, port, dev->ud_addr); bad: if (err != USBD_NORMAL_COMPLETION) { if (depth == 0 && port == 0 && dev->ud_pipe0) usbd_kill_pipe(dev->ud_pipe0); usbd_remove_device(dev, up); } return err; } static usbd_status xhci_ring_init(struct xhci_softc * const sc, struct xhci_ring **xrp, size_t ntrb, size_t align) { size_t size = ntrb * XHCI_TRB_SIZE; struct xhci_ring *xr; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("xr %#jx ntrb %#jx align %#jx", (uintptr_t)*xrp, ntrb, align, 0); xr = kmem_zalloc(sizeof(struct xhci_ring), KM_SLEEP); DPRINTFN(1, "ring %#jx", (uintptr_t)xr, 0, 0, 0); int err = usb_allocmem(sc->sc_bus.ub_dmatag, size, align, USBMALLOC_COHERENT | USBMALLOC_ZERO, &xr->xr_dma); if (err) { kmem_free(xr, sizeof(struct xhci_ring)); DPRINTFN(1, "alloc xr_dma failed %jd", err, 0, 0, 0); return err; } mutex_init(&xr->xr_lock, MUTEX_DEFAULT, IPL_SOFTUSB); xr->xr_cookies = kmem_zalloc(sizeof(*xr->xr_cookies) * ntrb, KM_SLEEP); xr->xr_trb = xhci_ring_trbv(xr, 0); xr->xr_ntrb = ntrb; xr->is_halted = false; xhci_host_dequeue(xr); *xrp = xr; return USBD_NORMAL_COMPLETION; } static void xhci_ring_free(struct xhci_softc * const sc, struct xhci_ring ** const xr) { if (*xr == NULL) return; usb_freemem(&(*xr)->xr_dma); mutex_destroy(&(*xr)->xr_lock); kmem_free((*xr)->xr_cookies, sizeof(*(*xr)->xr_cookies) * (*xr)->xr_ntrb); kmem_free(*xr, sizeof(struct xhci_ring)); *xr = NULL; } static void xhci_ring_put(struct xhci_softc * const sc, struct xhci_ring * const xr, void *cookie, struct xhci_soft_trb * const trbs, size_t ntrbs) { size_t i; u_int ri; u_int cs; uint64_t parameter; uint32_t status; uint32_t control; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("%#jx xr_ep %#jx xr_cs %ju", (uintptr_t)xr, xr->xr_ep, xr->xr_cs, 0); KASSERTMSG(ntrbs < xr->xr_ntrb, "ntrbs %zu, xr->xr_ntrb %u", ntrbs, xr->xr_ntrb); for (i = 0; i < ntrbs; i++) { DPRINTFN(12, "xr %#jx trbs %#jx num %ju", (uintptr_t)xr, (uintptr_t)trbs, i, 0); DPRINTFN(12, " 0x%016jx 0x%08jx 0x%08jx", trbs[i].trb_0, trbs[i].trb_2, trbs[i].trb_3, 0); KASSERTMSG(XHCI_TRB_3_TYPE_GET(trbs[i].trb_3) != XHCI_TRB_TYPE_LINK, "trbs[%zu].trb3 %#x", i, trbs[i].trb_3); } ri = xr->xr_ep; cs = xr->xr_cs; /* * Although the xhci hardware can do scatter/gather dma from * arbitrary sized buffers, there is a non-obvious restriction * that a LINK trb is only allowed at the end of a burst of * transfers - which might be 16kB. * Arbitrary aligned LINK trb definitely fail on Ivy bridge. * The simple solution is not to allow a LINK trb in the middle * of anything - as here. * XXX: (dsl) There are xhci controllers out there (eg some made by * ASMedia) that seem to lock up if they process a LINK trb but * cannot process the linked-to trb yet. * The code should write the 'cycle' bit on the link trb AFTER * adding the other trb. */ u_int firstep = xr->xr_ep; u_int firstcs = xr->xr_cs; for (i = 0; i < ntrbs; ) { u_int oldri = ri; u_int oldcs = cs; if (ri >= (xr->xr_ntrb - 1)) { /* Put Link TD at the end of ring */ parameter = xhci_ring_trbp(xr, 0); status = 0; control = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_LINK) | XHCI_TRB_3_TC_BIT; xr->xr_cookies[ri] = NULL; xr->xr_ep = 0; xr->xr_cs ^= 1; ri = xr->xr_ep; cs = xr->xr_cs; } else { parameter = trbs[i].trb_0; status = trbs[i].trb_2; control = trbs[i].trb_3; xr->xr_cookies[ri] = cookie; ri++; i++; } /* * If this is a first TRB, mark it invalid to prevent * xHC from running it immediately. */ if (oldri == firstep) { if (oldcs) { control &= ~XHCI_TRB_3_CYCLE_BIT; } else { control |= XHCI_TRB_3_CYCLE_BIT; } } else { if (oldcs) { control |= XHCI_TRB_3_CYCLE_BIT; } else { control &= ~XHCI_TRB_3_CYCLE_BIT; } } xhci_trb_put(&xr->xr_trb[oldri], parameter, status, control); usb_syncmem(&xr->xr_dma, XHCI_TRB_SIZE * oldri, XHCI_TRB_SIZE * 1, BUS_DMASYNC_PREWRITE); } /* Now invert cycle bit of first TRB */ if (firstcs) { xr->xr_trb[firstep].trb_3 |= htole32(XHCI_TRB_3_CYCLE_BIT); } else { xr->xr_trb[firstep].trb_3 &= ~htole32(XHCI_TRB_3_CYCLE_BIT); } usb_syncmem(&xr->xr_dma, XHCI_TRB_SIZE * firstep, XHCI_TRB_SIZE * 1, BUS_DMASYNC_PREWRITE); xr->xr_ep = ri; xr->xr_cs = cs; DPRINTFN(12, "%#jx xr_ep %#jx xr_cs %ju", (uintptr_t)xr, xr->xr_ep, xr->xr_cs, 0); } static inline void xhci_ring_put_xfer(struct xhci_softc * const sc, struct xhci_ring * const tr, struct xhci_xfer *xx, u_int ntrb) { KASSERT(ntrb <= xx->xx_ntrb); xhci_ring_put(sc, tr, xx, xx->xx_trb, ntrb); } /* * Stop execution commands, purge all commands on command ring, and * rewind dequeue pointer. */ static void xhci_abort_command(struct xhci_softc *sc) { struct xhci_ring * const cr = sc->sc_cr; uint64_t crcr; int i; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("command %#jx timeout, aborting", sc->sc_command_addr, 0, 0, 0); mutex_enter(&cr->xr_lock); /* 4.6.1.2 Aborting a Command */ crcr = xhci_op_read_8(sc, XHCI_CRCR); xhci_op_write_8(sc, XHCI_CRCR, crcr | XHCI_CRCR_LO_CA); for (i = 0; i < 500; i++) { crcr = xhci_op_read_8(sc, XHCI_CRCR); if ((crcr & XHCI_CRCR_LO_CRR) == 0) break; usb_delay_ms(&sc->sc_bus, 1); } if ((crcr & XHCI_CRCR_LO_CRR) != 0) { DPRINTFN(1, "Command Abort timeout", 0, 0, 0, 0); /* reset HC here? */ } /* reset command ring dequeue pointer */ cr->xr_ep = 0; cr->xr_cs = 1; xhci_op_write_8(sc, XHCI_CRCR, xhci_ring_trbp(cr, 0) | cr->xr_cs); mutex_exit(&cr->xr_lock); } /* * Put a command on command ring, ring bell, set timer, and cv_timedwait. * Command completion is notified by cv_signal from xhci_event_cmd() * (called from xhci_softint), or timed-out. * The completion code is copied to sc->sc_result_trb in xhci_event_cmd(), * then do_command examines it. */ static usbd_status xhci_do_command_locked(struct xhci_softc * const sc, struct xhci_soft_trb * const trb, int timeout) { struct xhci_ring * const cr = sc->sc_cr; usbd_status err; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("input: 0x%016jx 0x%08jx 0x%08jx", trb->trb_0, trb->trb_2, trb->trb_3, 0); KASSERTMSG(!cpu_intr_p() && !cpu_softintr_p(), "called from intr ctx"); KASSERT(mutex_owned(&sc->sc_lock)); while (sc->sc_command_addr != 0 || (sc->sc_suspender != NULL && sc->sc_suspender != curlwp)) cv_wait(&sc->sc_cmdbusy_cv, &sc->sc_lock); if (sc->sc_suspendresume_failed) return USBD_IOERROR; /* * If enqueue pointer points at last of ring, it's Link TRB, * command TRB will be stored in 0th TRB. */ if (cr->xr_ep == cr->xr_ntrb - 1) sc->sc_command_addr = xhci_ring_trbp(cr, 0); else sc->sc_command_addr = xhci_ring_trbp(cr, cr->xr_ep); sc->sc_resultpending = true; mutex_enter(&cr->xr_lock); xhci_ring_put(sc, cr, NULL, trb, 1); mutex_exit(&cr->xr_lock); xhci_db_write_4(sc, XHCI_DOORBELL(0), 0); while (sc->sc_resultpending) { if (cv_timedwait(&sc->sc_command_cv, &sc->sc_lock, MAX(1, mstohz(timeout))) == EWOULDBLOCK) { xhci_abort_command(sc); err = USBD_TIMEOUT; goto timedout; } } trb->trb_0 = sc->sc_result_trb.trb_0; trb->trb_2 = sc->sc_result_trb.trb_2; trb->trb_3 = sc->sc_result_trb.trb_3; DPRINTFN(12, "output: 0x%016jx 0x%08jx 0x%08jx", trb->trb_0, trb->trb_2, trb->trb_3, 0); switch (XHCI_TRB_2_ERROR_GET(trb->trb_2)) { case XHCI_TRB_ERROR_SUCCESS: err = USBD_NORMAL_COMPLETION; break; default: case 192 ... 223: DPRINTFN(5, "error %#jx", XHCI_TRB_2_ERROR_GET(trb->trb_2), 0, 0, 0); err = USBD_IOERROR; break; case 224 ... 255: err = USBD_NORMAL_COMPLETION; break; } timedout: sc->sc_resultpending = false; sc->sc_command_addr = 0; cv_broadcast(&sc->sc_cmdbusy_cv); return err; } static usbd_status xhci_do_command(struct xhci_softc * const sc, struct xhci_soft_trb * const trb, int timeout) { mutex_enter(&sc->sc_lock); usbd_status ret = xhci_do_command_locked(sc, trb, timeout); mutex_exit(&sc->sc_lock); return ret; } static usbd_status xhci_enable_slot(struct xhci_softc * const sc, uint8_t * const slotp) { struct xhci_soft_trb trb; usbd_status err; XHCIHIST_FUNC(); XHCIHIST_CALLED(); trb.trb_0 = 0; trb.trb_2 = 0; trb.trb_3 = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_ENABLE_SLOT); err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); if (err != USBD_NORMAL_COMPLETION) { return err; } *slotp = XHCI_TRB_3_SLOT_GET(trb.trb_3); return err; } /* * xHCI 4.6.4 * Deallocate ring and device/input context DMA buffers, and disable_slot. * All endpoints in the slot should be stopped. * Should be called with sc_lock held. */ static usbd_status xhci_disable_slot(struct xhci_softc * const sc, uint8_t slot) { struct xhci_soft_trb trb; struct xhci_slot *xs; usbd_status err; XHCIHIST_FUNC(); XHCIHIST_CALLED(); if (sc->sc_dying) return USBD_IOERROR; trb.trb_0 = 0; trb.trb_2 = 0; trb.trb_3 = XHCI_TRB_3_SLOT_SET(slot) | XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_DISABLE_SLOT); err = xhci_do_command_locked(sc, &trb, USBD_DEFAULT_TIMEOUT); if (!err) { xs = &sc->sc_slots[slot]; if (xs->xs_idx != 0) { xhci_free_slot(sc, xs); xhci_set_dcba(sc, 0, slot); memset(xs, 0, sizeof(*xs)); } } return err; } /* * Set address of device and transition slot state from ENABLED to ADDRESSED * if Block Setaddress Request (BSR) is false. * If BSR==true, transition slot state from ENABLED to DEFAULT. * see xHCI 1.1 4.5.3, 3.3.4 * Should be called without sc_lock held. */ static usbd_status xhci_address_device(struct xhci_softc * const sc, uint64_t icp, uint8_t slot_id, bool bsr) { struct xhci_soft_trb trb; usbd_status err; XHCIHIST_FUNC(); if (bsr) { XHCIHIST_CALLARGS("icp %#jx slot %#jx with bsr", icp, slot_id, 0, 0); } else { XHCIHIST_CALLARGS("icp %#jx slot %#jx nobsr", icp, slot_id, 0, 0); } trb.trb_0 = icp; trb.trb_2 = 0; trb.trb_3 = XHCI_TRB_3_SLOT_SET(slot_id) | XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_ADDRESS_DEVICE) | (bsr ? XHCI_TRB_3_BSR_BIT : 0); err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); if (XHCI_TRB_2_ERROR_GET(trb.trb_2) == XHCI_TRB_ERROR_NO_SLOTS) err = USBD_NO_ADDR; return err; } static usbd_status xhci_update_ep0_mps(struct xhci_softc * const sc, struct xhci_slot * const xs, u_int mps) { struct xhci_soft_trb trb; usbd_status err; uint32_t * cp; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("slot %ju mps %ju", xs->xs_idx, mps, 0, 0); cp = xhci_slot_get_icv(sc, xs, XHCI_ICI_INPUT_CONTROL); cp[0] = htole32(0); cp[1] = htole32(XHCI_INCTX_1_ADD_MASK(XHCI_DCI_EP_CONTROL)); cp = xhci_slot_get_icv(sc, xs, xhci_dci_to_ici(XHCI_DCI_EP_CONTROL)); cp[1] = htole32(XHCI_EPCTX_1_MAXP_SIZE_SET(mps)); /* sync input contexts before they are read from memory */ usb_syncmem(&xs->xs_ic_dma, 0, sc->sc_pgsz, BUS_DMASYNC_PREWRITE); HEXDUMP("input context", xhci_slot_get_icv(sc, xs, 0), sc->sc_ctxsz * 4); trb.trb_0 = xhci_slot_get_icp(sc, xs, 0); trb.trb_2 = 0; trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_EVALUATE_CTX); err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); return err; } static void xhci_set_dcba(struct xhci_softc * const sc, uint64_t dcba, int si) { uint64_t * const dcbaa = KERNADDR(&sc->sc_dcbaa_dma, 0); XHCIHIST_FUNC(); XHCIHIST_CALLARGS("dcbaa %#jx dc 0x%016jx slot %jd", (uintptr_t)&dcbaa[si], dcba, si, 0); dcbaa[si] = htole64(dcba); usb_syncmem(&sc->sc_dcbaa_dma, si * sizeof(uint64_t), sizeof(uint64_t), BUS_DMASYNC_PREWRITE); } /* * Allocate device and input context DMA buffer, and * TRB DMA buffer for each endpoint. */ static usbd_status xhci_init_slot(struct usbd_device *dev, uint32_t slot) { struct xhci_softc * const sc = XHCI_BUS2SC(dev->ud_bus); struct xhci_slot *xs; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("slot %ju", slot, 0, 0, 0); xs = &sc->sc_slots[slot]; /* allocate contexts */ int err = usb_allocmem(sc->sc_bus.ub_dmatag, sc->sc_pgsz, sc->sc_pgsz, USBMALLOC_COHERENT | USBMALLOC_ZERO, &xs->xs_dc_dma); if (err) { DPRINTFN(1, "failed to allocmem output device context %jd", err, 0, 0, 0); return USBD_NOMEM; } err = usb_allocmem(sc->sc_bus.ub_dmatag, sc->sc_pgsz, sc->sc_pgsz, USBMALLOC_COHERENT | USBMALLOC_ZERO, &xs->xs_ic_dma); if (err) { DPRINTFN(1, "failed to allocmem input device context %jd", err, 0, 0, 0); goto bad1; } memset(&xs->xs_xr[0], 0, sizeof(xs->xs_xr)); xs->xs_idx = slot; return USBD_NORMAL_COMPLETION; bad1: usb_freemem(&xs->xs_dc_dma); xs->xs_idx = 0; return USBD_NOMEM; } static void xhci_free_slot(struct xhci_softc *sc, struct xhci_slot *xs) { u_int dci; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("slot %ju", xs->xs_idx, 0, 0, 0); /* deallocate all allocated rings in the slot */ for (dci = XHCI_DCI_SLOT; dci <= XHCI_MAX_DCI; dci++) { if (xs->xs_xr[dci] != NULL) xhci_ring_free(sc, &xs->xs_xr[dci]); } usb_freemem(&xs->xs_ic_dma); usb_freemem(&xs->xs_dc_dma); xs->xs_idx = 0; } /* * Setup slot context, set Device Context Base Address, and issue * Set Address Device command. */ static usbd_status xhci_set_address(struct usbd_device *dev, uint32_t slot, bool bsr) { struct xhci_softc * const sc = XHCI_BUS2SC(dev->ud_bus); struct xhci_slot *xs; usbd_status err; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("slot %ju bsr %ju", slot, bsr, 0, 0); xs = &sc->sc_slots[slot]; xhci_setup_ctx(dev->ud_pipe0); HEXDUMP("input context", xhci_slot_get_icv(sc, xs, 0), sc->sc_ctxsz * 3); xhci_set_dcba(sc, DMAADDR(&xs->xs_dc_dma, 0), slot); err = xhci_address_device(sc, xhci_slot_get_icp(sc, xs, 0), slot, bsr); usb_syncmem(&xs->xs_dc_dma, 0, sc->sc_pgsz, BUS_DMASYNC_POSTREAD); HEXDUMP("output context", xhci_slot_get_dcv(sc, xs, 0), sc->sc_ctxsz * 2); return err; } /* * 4.8.2, 6.2.3.2 * construct slot/endpoint context parameters and do syncmem */ static void xhci_setup_ctx(struct usbd_pipe *pipe) { struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); struct usbd_device *dev = pipe->up_dev; struct xhci_slot * const xs = dev->ud_hcpriv; usb_endpoint_descriptor_t * const ed = pipe->up_endpoint->ue_edesc; const u_int dci = xhci_ep_get_dci(ed); const uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes); uint32_t *cp; uint8_t speed = dev->ud_speed; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("pipe %#jx: slot %ju dci %ju speed %ju", (uintptr_t)pipe, xs->xs_idx, dci, speed); /* set up initial input control context */ cp = xhci_slot_get_icv(sc, xs, XHCI_ICI_INPUT_CONTROL); cp[0] = htole32(0); cp[1] = htole32(XHCI_INCTX_1_ADD_MASK(dci)); cp[1] |= htole32(XHCI_INCTX_1_ADD_MASK(XHCI_DCI_SLOT)); cp[7] = htole32(0); /* set up input slot context */ cp = xhci_slot_get_icv(sc, xs, xhci_dci_to_ici(XHCI_DCI_SLOT)); cp[0] = XHCI_SCTX_0_CTX_NUM_SET(dci) | XHCI_SCTX_0_SPEED_SET(xhci_speed2xspeed(speed)); cp[1] = 0; cp[2] = XHCI_SCTX_2_IRQ_TARGET_SET(0); cp[3] = 0; xhci_setup_route(pipe, cp); xhci_setup_tthub(pipe, cp); cp[0] = htole32(cp[0]); cp[1] = htole32(cp[1]); cp[2] = htole32(cp[2]); cp[3] = htole32(cp[3]); /* set up input endpoint context */ cp = xhci_slot_get_icv(sc, xs, xhci_dci_to_ici(dci)); cp[0] = XHCI_EPCTX_0_EPSTATE_SET(0) | XHCI_EPCTX_0_MULT_SET(0) | XHCI_EPCTX_0_MAXP_STREAMS_SET(0) | XHCI_EPCTX_0_LSA_SET(0) | XHCI_EPCTX_0_MAX_ESIT_PAYLOAD_HI_SET(0); cp[1] = XHCI_EPCTX_1_EPTYPE_SET(xhci_ep_get_type(ed)) | XHCI_EPCTX_1_HID_SET(0) | XHCI_EPCTX_1_MAXB_SET(0); if (xfertype != UE_ISOCHRONOUS) cp[1] |= XHCI_EPCTX_1_CERR_SET(3); xhci_setup_maxburst(pipe, cp); DPRINTFN(4, "setting on dci %ju ival %ju mult %ju mps %#jx", dci, XHCI_EPCTX_0_IVAL_GET(cp[0]), XHCI_EPCTX_0_MULT_GET(cp[0]), XHCI_EPCTX_1_MAXP_SIZE_GET(cp[1])); DPRINTFN(4, " maxburst %ju mep %#jx atl %#jx", XHCI_EPCTX_1_MAXB_GET(cp[1]), (XHCI_EPCTX_0_MAX_ESIT_PAYLOAD_HI_GET(cp[0]) << 16) + XHCI_EPCTX_4_MAX_ESIT_PAYLOAD_GET(cp[4]), XHCI_EPCTX_4_AVG_TRB_LEN_GET(cp[4]), 0); /* rewind TR dequeue pointer in xHC */ /* can't use xhci_ep_get_dci() yet? */ *(uint64_t *)(&cp[2]) = htole64( xhci_ring_trbp(xs->xs_xr[dci], 0) | XHCI_EPCTX_2_DCS_SET(1)); cp[0] = htole32(cp[0]); cp[1] = htole32(cp[1]); cp[4] = htole32(cp[4]); /* rewind TR dequeue pointer in driver */ struct xhci_ring *xr = xs->xs_xr[dci]; mutex_enter(&xr->xr_lock); xhci_host_dequeue(xr); mutex_exit(&xr->xr_lock); /* sync input contexts before they are read from memory */ usb_syncmem(&xs->xs_ic_dma, 0, sc->sc_pgsz, BUS_DMASYNC_PREWRITE); } /* * Setup route string and roothub port of given device for slot context */ static void xhci_setup_route(struct usbd_pipe *pipe, uint32_t *cp) { struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); struct usbd_device *dev = pipe->up_dev; struct usbd_port *up = dev->ud_powersrc; struct usbd_device *hub; struct usbd_device *adev; uint8_t rhport = 0; uint32_t route = 0; XHCIHIST_FUNC(); XHCIHIST_CALLED(); /* Locate root hub port and Determine route string */ /* 4.3.3 route string does not include roothub port */ for (hub = dev; hub != NULL; hub = hub->ud_myhub) { uint32_t dep; DPRINTFN(4, "hub %#jx depth %jd upport %#jx upportno %jd", (uintptr_t)hub, hub->ud_depth, (uintptr_t)hub->ud_powersrc, hub->ud_powersrc ? (uintptr_t)hub->ud_powersrc->up_portno : -1); if (hub->ud_powersrc == NULL) break; dep = hub->ud_depth; if (dep == 0) break; rhport = hub->ud_powersrc->up_portno; if (dep > USB_HUB_MAX_DEPTH) continue; route |= (rhport > UHD_SS_NPORTS_MAX ? UHD_SS_NPORTS_MAX : rhport) << ((dep - 1) * 4); } route = route >> 4; size_t bn = hub == sc->sc_bus.ub_roothub ? 0 : 1; /* Locate port on upstream high speed hub */ for (adev = dev, hub = up->up_parent; hub != NULL && hub->ud_speed != USB_SPEED_HIGH; adev = hub, hub = hub->ud_myhub) ; if (hub) { int p; for (p = 1; p <= hub->ud_hub->uh_hubdesc.bNbrPorts; p++) { if (hub->ud_hub->uh_ports[p - 1].up_dev == adev) { dev->ud_myhsport = &hub->ud_hub->uh_ports[p - 1]; goto found; } } panic("%s: cannot find HS port", __func__); found: DPRINTFN(4, "high speed port %jd", p, 0, 0, 0); } else { dev->ud_myhsport = NULL; } const size_t ctlrport = xhci_rhport2ctlrport(sc, bn, rhport); DPRINTFN(4, "rhport %ju ctlrport %ju Route %05jx hub %#jx", rhport, ctlrport, route, (uintptr_t)hub); cp[0] |= XHCI_SCTX_0_ROUTE_SET(route); cp[1] |= XHCI_SCTX_1_RH_PORT_SET(ctlrport); } /* * Setup whether device is hub, whether device uses MTT, and * TT informations if it uses MTT. */ static void xhci_setup_tthub(struct usbd_pipe *pipe, uint32_t *cp) { struct usbd_device *dev = pipe->up_dev; struct usbd_port *myhsport = dev->ud_myhsport; usb_device_descriptor_t * const dd = &dev->ud_ddesc; uint32_t speed = dev->ud_speed; uint8_t rhaddr = dev->ud_bus->ub_rhaddr; uint8_t tthubslot, ttportnum; bool ishub; bool usemtt; XHCIHIST_FUNC(); /* * 6.2.2, Table 57-60, 6.2.2.1, 6.2.2.2 * tthubslot: * This is the slot ID of parent HS hub * if LS/FS device is connected && connected through HS hub. * This is 0 if device is not LS/FS device || * parent hub is not HS hub || * attached to root hub. * ttportnum: * This is the downstream facing port of parent HS hub * if LS/FS device is connected. * This is 0 if device is not LS/FS device || * parent hub is not HS hub || * attached to root hub. */ if (myhsport && myhsport->up_parent->ud_addr != rhaddr && (speed == USB_SPEED_LOW || speed == USB_SPEED_FULL)) { ttportnum = myhsport->up_portno; tthubslot = myhsport->up_parent->ud_addr; } else { ttportnum = 0; tthubslot = 0; } XHCIHIST_CALLARGS("myhsport %#jx ttportnum=%jd tthubslot=%jd", (uintptr_t)myhsport, ttportnum, tthubslot, 0); /* ishub is valid after reading UDESC_DEVICE */ ishub = (dd->bDeviceClass == UDCLASS_HUB); /* dev->ud_hub is valid after reading UDESC_HUB */ if (ishub && dev->ud_hub) { usb_hub_descriptor_t *hd = &dev->ud_hub->uh_hubdesc; uint8_t ttt = __SHIFTOUT(UGETW(hd->wHubCharacteristics), UHD_TT_THINK); cp[1] |= XHCI_SCTX_1_NUM_PORTS_SET(hd->bNbrPorts); cp[2] |= XHCI_SCTX_2_TT_THINK_TIME_SET(ttt); DPRINTFN(4, "nports=%jd ttt=%jd", hd->bNbrPorts, ttt, 0, 0); } #define IS_MTTHUB(dd) \ ((dd)->bDeviceProtocol == UDPROTO_HSHUBMTT) /* * MTT flag is set if * 1. this is HS hub && MTTs are supported and enabled; or * 2. this is LS or FS device && there is a parent HS hub where MTTs * are supported and enabled. * * XXX enabled is not tested yet */ if (ishub && speed == USB_SPEED_HIGH && IS_MTTHUB(dd)) usemtt = true; else if ((speed == USB_SPEED_LOW || speed == USB_SPEED_FULL) && myhsport && myhsport->up_parent->ud_addr != rhaddr && IS_MTTHUB(&myhsport->up_parent->ud_ddesc)) usemtt = true; else usemtt = false; DPRINTFN(4, "class %ju proto %ju ishub %jd usemtt %jd", dd->bDeviceClass, dd->bDeviceProtocol, ishub, usemtt); #undef IS_MTTHUB cp[0] |= XHCI_SCTX_0_HUB_SET(ishub ? 1 : 0) | XHCI_SCTX_0_MTT_SET(usemtt ? 1 : 0); cp[2] |= XHCI_SCTX_2_TT_HUB_SID_SET(tthubslot) | XHCI_SCTX_2_TT_PORT_NUM_SET(ttportnum); } static const usb_endpoint_ss_comp_descriptor_t * xhci_get_essc_desc(struct usbd_pipe *pipe) { struct usbd_device *dev = pipe->up_dev; usb_endpoint_descriptor_t * const ed = pipe->up_endpoint->ue_edesc; const usb_cdc_descriptor_t *cdcd; usbd_desc_iter_t iter; uint8_t ep; /* config desc is NULL when opening ep0 */ if (dev == NULL || dev->ud_cdesc == NULL) return NULL; cdcd = (const usb_cdc_descriptor_t *)usb_find_desc(dev, UDESC_INTERFACE, USBD_CDCSUBTYPE_ANY); if (cdcd == NULL) return NULL; usb_desc_iter_init(dev, &iter); iter.cur = (const void *)cdcd; /* find endpoint_ss_comp desc for ep of this pipe */ for (ep = 0;;) { cdcd = (const usb_cdc_descriptor_t *)usb_desc_iter_next(&iter); if (cdcd == NULL) break; if (ep == 0 && cdcd->bDescriptorType == UDESC_ENDPOINT) { ep = ((const usb_endpoint_descriptor_t *)cdcd)-> bEndpointAddress; if (UE_GET_ADDR(ep) == UE_GET_ADDR(ed->bEndpointAddress)) { cdcd = (const usb_cdc_descriptor_t *) usb_desc_iter_next(&iter); break; } ep = 0; } } if (cdcd != NULL && cdcd->bDescriptorType == UDESC_ENDPOINT_SS_COMP) { return (const usb_endpoint_ss_comp_descriptor_t *)cdcd; } return NULL; } /* set up params for periodic endpoint */ static void xhci_setup_maxburst(struct usbd_pipe *pipe, uint32_t *cp) { struct xhci_pipe * const xpipe = (struct xhci_pipe *)pipe; struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); struct usbd_device * const dev = pipe->up_dev; usb_endpoint_descriptor_t * const ed = pipe->up_endpoint->ue_edesc; const uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes); uint16_t mps = UGETW(ed->wMaxPacketSize); uint8_t speed = dev->ud_speed; uint32_t maxb, mep, atl; uint8_t ival, mult; const usb_endpoint_ss_comp_descriptor_t * esscd = xhci_get_essc_desc(pipe); /* USB 2.0 9.6.6, xHCI 4.8.2.4, 6.2.3.2 - 6.2.3.8 */ switch (xfertype) { case UE_ISOCHRONOUS: case UE_INTERRUPT: if (USB_IS_SS(speed)) { maxb = esscd ? esscd->bMaxBurst : UE_GET_TRANS(mps); mep = esscd ? UGETW(esscd->wBytesPerInterval) : UE_GET_SIZE(mps) * (maxb + 1); if (esscd && xfertype == UE_ISOCHRONOUS && XHCI_HCC2_LEC(sc->sc_hcc2) == 0) { mult = UE_GET_SS_ISO_MULT(esscd->bmAttributes); mult = (mult > 2) ? 2 : mult; } else mult = 0; } else { switch (speed) { case USB_SPEED_HIGH: maxb = UE_GET_TRANS(mps); mep = UE_GET_SIZE(mps) * (maxb + 1); break; case USB_SPEED_FULL: maxb = 0; mep = UE_GET_SIZE(mps); break; default: maxb = 0; mep = 0; break; } mult = 0; } mps = UE_GET_SIZE(mps); if (pipe->up_interval == USBD_DEFAULT_INTERVAL) ival = ed->bInterval; else ival = pipe->up_interval; ival = xhci_bival2ival(ival, speed, xfertype); atl = mep; break; case UE_CONTROL: case UE_BULK: default: if (USB_IS_SS(speed)) { maxb = esscd ? esscd->bMaxBurst : 0; } else maxb = 0; mps = UE_GET_SIZE(mps); mep = 0; mult = 0; ival = 0; if (xfertype == UE_CONTROL) atl = 8; /* 6.2.3 */ else atl = mps; break; } switch (speed) { case USB_SPEED_LOW: break; case USB_SPEED_FULL: if (xfertype == UE_INTERRUPT) if (mep > XHCI_EPCTX_MEP_FS_INTR) mep = XHCI_EPCTX_MEP_FS_INTR; if (xfertype == UE_ISOCHRONOUS) if (mep > XHCI_EPCTX_MEP_FS_ISOC) mep = XHCI_EPCTX_MEP_FS_ISOC; break; case USB_SPEED_HIGH: if (xfertype == UE_INTERRUPT) if (mep > XHCI_EPCTX_MEP_HS_INTR) mep = XHCI_EPCTX_MEP_HS_INTR; if (xfertype == UE_ISOCHRONOUS) if (mep > XHCI_EPCTX_MEP_HS_ISOC) mep = XHCI_EPCTX_MEP_HS_ISOC; break; case USB_SPEED_SUPER: case USB_SPEED_SUPER_PLUS: default: if (xfertype == UE_INTERRUPT) if (mep > XHCI_EPCTX_MEP_SS_INTR) mep = XHCI_EPCTX_MEP_SS_INTR; if (xfertype == UE_ISOCHRONOUS) { if (speed == USB_SPEED_SUPER || XHCI_HCC2_LEC(sc->sc_hcc2) == 0) { if (mep > XHCI_EPCTX_MEP_SS_ISOC) mep = XHCI_EPCTX_MEP_SS_ISOC; } else { if (mep > XHCI_EPCTX_MEP_SS_ISOC_LEC) mep = XHCI_EPCTX_MEP_SS_ISOC_LEC; } } break; } xpipe->xp_maxb = maxb + 1; xpipe->xp_mult = mult + 1; cp[0] |= XHCI_EPCTX_0_MAX_ESIT_PAYLOAD_HI_SET(mep >> 16); cp[0] |= XHCI_EPCTX_0_IVAL_SET(ival); cp[0] |= XHCI_EPCTX_0_MULT_SET(mult); cp[1] |= XHCI_EPCTX_1_MAXP_SIZE_SET(mps); cp[1] |= XHCI_EPCTX_1_MAXB_SET(maxb); cp[4] |= XHCI_EPCTX_4_MAX_ESIT_PAYLOAD_SET(mep & 0xffff); cp[4] |= XHCI_EPCTX_4_AVG_TRB_LEN_SET(atl); } /* * Convert usbdi bInterval value to xhci endpoint context interval value * for periodic pipe. * xHCI 6.2.3.6 Table 65, USB 2.0 9.6.6 */ static uint32_t xhci_bival2ival(uint32_t ival, uint32_t speed, uint32_t xfertype) { if (xfertype != UE_INTERRUPT && xfertype != UE_ISOCHRONOUS) return 0; if (xfertype == UE_INTERRUPT && (speed == USB_SPEED_LOW || speed == USB_SPEED_FULL)) { u_int i; /* * round ival down to "the nearest base 2 multiple of * bInterval * 8". * bInterval is at most 255 as its type is uByte. * 255(ms) = 2040(x 125us) < 2^11, so start with 10. */ for (i = 10; i > 0; i--) { if ((ival * 8) >= (1 << i)) break; } ival = i; /* 3 - 10 */ ival = (ival < 3) ? 3 : ival; } else if (speed == USB_SPEED_FULL) { /* FS isoc */ ival += 3; /* 1ms -> 125us */ ival--; /* Interval = bInterval-1 */ /* 3 - 18 */ ival = (ival > 18) ? 18 : ival; ival = (ival < 3) ? 3 : ival; } else { /* SS/HS intr/isoc */ if (ival > 0) ival--; /* Interval = bInterval-1 */ /* 0 - 15 */ ival = (ival > 15) ? 15 : ival; } return ival; } /* ----- */ static void xhci_noop(struct usbd_pipe *pipe) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); } /* * Process root hub request. */ static int xhci_roothub_ctrl_locked(struct usbd_bus *bus, usb_device_request_t *req, void *buf, int buflen) { struct xhci_softc * const sc = XHCI_BUS2SC(bus); usb_port_status_t ps; int l, totlen = 0; uint16_t len, value, index; int port, i; uint32_t v; XHCIHIST_FUNC(); KASSERT(mutex_owned(&sc->sc_rhlock)); if (sc->sc_dying) return -1; size_t bn = bus == &sc->sc_bus ? 0 : 1; len = UGETW(req->wLength); value = UGETW(req->wValue); index = UGETW(req->wIndex); XHCIHIST_CALLARGS("rhreq: %04jx %04jx %04jx %04jx", req->bmRequestType | (req->bRequest << 8), value, index, len); #define C(x,y) ((x) | ((y) << 8)) switch (C(req->bRequest, req->bmRequestType)) { case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): DPRINTFN(8, "getdesc: wValue=0x%04jx", value, 0, 0, 0); if (len == 0) break; switch (value) { #define sd ((usb_string_descriptor_t *)buf) case C(2, UDESC_STRING): /* Product */ totlen = usb_makestrdesc(sd, len, "xHCI root hub"); break; #undef sd default: /* default from usbroothub */ return buflen; } break; /* Hub requests */ case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): break; /* Clear Port Feature request */ case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): { const size_t cp = xhci_rhport2ctlrport(sc, bn, index); DPRINTFN(4, "UR_CLEAR_PORT_FEAT bp=%jd feat=%jd bus=%jd cp=%jd", index, value, bn, cp); if (index < 1 || index > sc->sc_rhportcount[bn]) { return -1; } port = XHCI_PORTSC(cp); v = xhci_op_read_4(sc, port); DPRINTFN(4, "portsc=0x%08jx", v, 0, 0, 0); v &= ~XHCI_PS_CLEAR; switch (value) { case UHF_PORT_ENABLE: xhci_op_write_4(sc, port, v & ~XHCI_PS_PED); break; case UHF_PORT_SUSPEND: return -1; case UHF_PORT_POWER: break; case UHF_PORT_TEST: case UHF_PORT_INDICATOR: return -1; case UHF_C_PORT_CONNECTION: xhci_op_write_4(sc, port, v | XHCI_PS_CSC); break; case UHF_C_PORT_ENABLE: case UHF_C_PORT_SUSPEND: case UHF_C_PORT_OVER_CURRENT: return -1; case UHF_C_BH_PORT_RESET: xhci_op_write_4(sc, port, v | XHCI_PS_WRC); break; case UHF_C_PORT_RESET: xhci_op_write_4(sc, port, v | XHCI_PS_PRC); break; case UHF_C_PORT_LINK_STATE: xhci_op_write_4(sc, port, v | XHCI_PS_PLC); break; case UHF_C_PORT_CONFIG_ERROR: xhci_op_write_4(sc, port, v | XHCI_PS_CEC); break; default: return -1; } break; } case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): if (len == 0) break; if ((value & 0xff) != 0) { return -1; } usb_hub_descriptor_t hubd; totlen = uimin(buflen, sizeof(hubd)); memcpy(&hubd, buf, totlen); hubd.bNbrPorts = sc->sc_rhportcount[bn]; USETW(hubd.wHubCharacteristics, UHD_PWR_NO_SWITCH); hubd.bPwrOn2PwrGood = 200; for (i = 0, l = sc->sc_rhportcount[bn]; l > 0; i++, l -= 8) { /* XXX can't find out? */ hubd.DeviceRemovable[i++] = 0; } hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE + i; totlen = uimin(totlen, hubd.bDescLength); memcpy(buf, &hubd, totlen); break; case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): if (len != 4) { return -1; } memset(buf, 0, len); /* ? XXX */ totlen = len; break; /* Get Port Status request */ case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): { const size_t cp = xhci_rhport2ctlrport(sc, bn, index); DPRINTFN(8, "get port status bn=%jd i=%jd cp=%ju", bn, index, cp, 0); if (index < 1 || index > sc->sc_rhportcount[bn]) { DPRINTFN(5, "bad get port status: index=%jd bn=%jd " "portcount=%jd", index, bn, sc->sc_rhportcount[bn], 0); return -1; } if (len != 4) { DPRINTFN(5, "bad get port status: len %jd != 4", len, 0, 0, 0); return -1; } v = xhci_op_read_4(sc, XHCI_PORTSC(cp)); DPRINTFN(4, "getrhportsc %jd 0x%08jx", cp, v, 0, 0); i = xhci_xspeed2psspeed(XHCI_PS_SPEED_GET(v)); if (v & XHCI_PS_CCS) i |= UPS_CURRENT_CONNECT_STATUS; if (v & XHCI_PS_PED) i |= UPS_PORT_ENABLED; if (v & XHCI_PS_OCA) i |= UPS_OVERCURRENT_INDICATOR; //if (v & XHCI_PS_SUSP) i |= UPS_SUSPEND; if (v & XHCI_PS_PR) i |= UPS_RESET; if (v & XHCI_PS_PP) { if (i & UPS_OTHER_SPEED) i |= UPS_PORT_POWER_SS; else i |= UPS_PORT_POWER; } if (i & UPS_OTHER_SPEED) i |= UPS_PORT_LS_SET(XHCI_PS_PLS_GET(v)); if (sc->sc_vendor_port_status) i = sc->sc_vendor_port_status(sc, v, i); USETW(ps.wPortStatus, i); i = 0; if (v & XHCI_PS_CSC) i |= UPS_C_CONNECT_STATUS; if (v & XHCI_PS_PEC) i |= UPS_C_PORT_ENABLED; if (v & XHCI_PS_OCC) i |= UPS_C_OVERCURRENT_INDICATOR; if (v & XHCI_PS_PRC) i |= UPS_C_PORT_RESET; if (v & XHCI_PS_WRC) i |= UPS_C_BH_PORT_RESET; if (v & XHCI_PS_PLC) i |= UPS_C_PORT_LINK_STATE; if (v & XHCI_PS_CEC) i |= UPS_C_PORT_CONFIG_ERROR; USETW(ps.wPortChange, i); totlen = uimin(len, sizeof(ps)); memcpy(buf, &ps, totlen); DPRINTFN(5, "get port status: wPortStatus %#jx wPortChange %#jx" " totlen %jd", UGETW(ps.wPortStatus), UGETW(ps.wPortChange), totlen, 0); break; } case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): return -1; case C(UR_SET_HUB_DEPTH, UT_WRITE_CLASS_DEVICE): break; case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): break; /* Set Port Feature request */ case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): { int optval = (index >> 8) & 0xff; index &= 0xff; if (index < 1 || index > sc->sc_rhportcount[bn]) { return -1; } const size_t cp = xhci_rhport2ctlrport(sc, bn, index); port = XHCI_PORTSC(cp); v = xhci_op_read_4(sc, port); DPRINTFN(4, "index %jd cp %jd portsc=0x%08jx", index, cp, v, 0); v &= ~XHCI_PS_CLEAR; switch (value) { case UHF_PORT_ENABLE: xhci_op_write_4(sc, port, v | XHCI_PS_PED); break; case UHF_PORT_SUSPEND: /* XXX suspend */ break; case UHF_PORT_RESET: xhci_op_write_4(sc, port, v | XHCI_PS_PR); /* Wait for reset to complete. */ for (i = 0; i < USB_PORT_ROOT_RESET_DELAY / 10; i++) { if (sc->sc_dying) { return -1; } v = xhci_op_read_4(sc, port); if ((v & XHCI_PS_PR) == 0) { break; } usb_delay_ms(&sc->sc_bus, 10); } break; case UHF_PORT_POWER: /* XXX power control */ break; /* XXX more */ case UHF_C_PORT_RESET: xhci_op_write_4(sc, port, v | XHCI_PS_PRC); break; case UHF_PORT_U1_TIMEOUT: if (XHCI_PS_SPEED_GET(v) < XHCI_PS_SPEED_SS) { return -1; } port = XHCI_PORTPMSC(cp); v = xhci_op_read_4(sc, port); DPRINTFN(4, "index %jd cp %jd portpmsc=0x%08jx", index, cp, v, 0); v &= ~XHCI_PM3_U1TO_SET(0xff); v |= XHCI_PM3_U1TO_SET(optval); xhci_op_write_4(sc, port, v); break; case UHF_PORT_U2_TIMEOUT: if (XHCI_PS_SPEED_GET(v) < XHCI_PS_SPEED_SS) { return -1; } port = XHCI_PORTPMSC(cp); v = xhci_op_read_4(sc, port); DPRINTFN(4, "index %jd cp %jd portpmsc=0x%08jx", index, cp, v, 0); v &= ~XHCI_PM3_U2TO_SET(0xff); v |= XHCI_PM3_U2TO_SET(optval); xhci_op_write_4(sc, port, v); break; default: return -1; } } break; case C(UR_CLEAR_TT_BUFFER, UT_WRITE_CLASS_OTHER): case C(UR_RESET_TT, UT_WRITE_CLASS_OTHER): case C(UR_GET_TT_STATE, UT_READ_CLASS_OTHER): case C(UR_STOP_TT, UT_WRITE_CLASS_OTHER): break; default: /* default from usbroothub */ return buflen; } return totlen; } static int xhci_roothub_ctrl(struct usbd_bus *bus, usb_device_request_t *req, void *buf, int buflen) { struct xhci_softc *sc = XHCI_BUS2SC(bus); int actlen; mutex_enter(&sc->sc_rhlock); actlen = xhci_roothub_ctrl_locked(bus, req, buf, buflen); mutex_exit(&sc->sc_rhlock); return actlen; } /* root hub interrupt */ static usbd_status xhci_root_intr_transfer(struct usbd_xfer *xfer) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); /* Pipe isn't running, start first */ return xhci_root_intr_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue)); } /* Wait for roothub port status/change */ static usbd_status xhci_root_intr_start(struct usbd_xfer *xfer) { struct xhci_softc * const sc = XHCI_XFER2SC(xfer); const size_t bn = XHCI_XFER2BUS(xfer) == &sc->sc_bus ? 0 : 1; XHCIHIST_FUNC(); XHCIHIST_CALLED(); KASSERT(xhci_polling_p(sc) || mutex_owned(&sc->sc_lock)); if (sc->sc_dying) return USBD_IOERROR; KASSERT(sc->sc_intrxfer[bn] == NULL); sc->sc_intrxfer[bn] = xfer; xfer->ux_status = USBD_IN_PROGRESS; return USBD_IN_PROGRESS; } static void xhci_root_intr_abort(struct usbd_xfer *xfer) { struct xhci_softc * const sc = XHCI_XFER2SC(xfer); const size_t bn = XHCI_XFER2BUS(xfer) == &sc->sc_bus ? 0 : 1; XHCIHIST_FUNC(); XHCIHIST_CALLED(); KASSERT(mutex_owned(&sc->sc_lock)); KASSERT(xfer->ux_pipe->up_intrxfer == xfer); /* If xfer has already completed, nothing to do here. */ if (sc->sc_intrxfer[bn] == NULL) return; /* * Otherwise, sc->sc_intrxfer[bn] had better be this transfer. * Cancel it. */ KASSERT(sc->sc_intrxfer[bn] == xfer); xfer->ux_status = USBD_CANCELLED; usb_transfer_complete(xfer); } static void xhci_root_intr_close(struct usbd_pipe *pipe) { struct xhci_softc * const sc __diagused = XHCI_PIPE2SC(pipe); const struct usbd_xfer *xfer __diagused = pipe->up_intrxfer; const size_t bn __diagused = XHCI_XFER2BUS(xfer) == &sc->sc_bus ? 0 : 1; XHCIHIST_FUNC(); XHCIHIST_CALLED(); KASSERT(mutex_owned(&sc->sc_lock)); /* * Caller must guarantee the xfer has completed first, by * closing the pipe only after normal completion or an abort. */ KASSERT(sc->sc_intrxfer[bn] == NULL); } static void xhci_root_intr_done(struct usbd_xfer *xfer) { struct xhci_softc * const sc = XHCI_XFER2SC(xfer); const size_t bn = XHCI_XFER2BUS(xfer) == &sc->sc_bus ? 0 : 1; XHCIHIST_FUNC(); XHCIHIST_CALLED(); KASSERT(mutex_owned(&sc->sc_lock)); /* Claim the xfer so it doesn't get completed again. */ KASSERT(sc->sc_intrxfer[bn] == xfer); KASSERT(xfer->ux_status != USBD_IN_PROGRESS); sc->sc_intrxfer[bn] = NULL; } /* -------------- */ /* device control */ static usbd_status xhci_device_ctrl_transfer(struct usbd_xfer *xfer) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); /* Pipe isn't running, start first */ return xhci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue)); } static usbd_status xhci_device_ctrl_start(struct usbd_xfer *xfer) { struct xhci_softc * const sc = XHCI_XFER2SC(xfer); struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); struct xhci_ring * const tr = xs->xs_xr[dci]; struct xhci_xfer * const xx = XHCI_XFER2XXFER(xfer); usb_device_request_t * const req = &xfer->ux_request; const bool isread = usbd_xfer_isread(xfer); const uint32_t len = UGETW(req->wLength); usb_dma_t * const dma = &xfer->ux_dmabuf; uint64_t parameter; uint32_t status; uint32_t control; u_int i; const bool polling = xhci_polling_p(sc); XHCIHIST_FUNC(); XHCIHIST_CALLARGS("req: %04jx %04jx %04jx %04jx", req->bmRequestType | (req->bRequest << 8), UGETW(req->wValue), UGETW(req->wIndex), UGETW(req->wLength)); KASSERT(polling || mutex_owned(&sc->sc_lock)); /* we rely on the bottom bits for extra info */ KASSERTMSG(((uintptr_t)xfer & 0x3) == 0x0, "xfer %p", xfer); KASSERT((xfer->ux_rqflags & URQ_REQUEST) != 0); if (tr->is_halted) goto out; i = 0; /* setup phase */ parameter = le64dec(req); /* to keep USB endian after xhci_trb_put() */ status = XHCI_TRB_2_IRQ_SET(0) | XHCI_TRB_2_BYTES_SET(sizeof(*req)); control = ((len == 0) ? XHCI_TRB_3_TRT_NONE : (isread ? XHCI_TRB_3_TRT_IN : XHCI_TRB_3_TRT_OUT)) | XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_SETUP_STAGE) | XHCI_TRB_3_IDT_BIT; xhci_xfer_put_trb(xx, i++, parameter, status, control); if (len != 0) { /* data phase */ parameter = DMAADDR(dma, 0); KASSERTMSG(len <= 0x10000, "len %d", len); status = XHCI_TRB_2_IRQ_SET(0) | XHCI_TRB_2_TDSZ_SET(0) | XHCI_TRB_2_BYTES_SET(len); control = (isread ? XHCI_TRB_3_DIR_IN : 0) | XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_DATA_STAGE) | (isread ? XHCI_TRB_3_ISP_BIT : 0) | XHCI_TRB_3_IOC_BIT; xhci_xfer_put_trb(xx, i++, parameter, status, control); usb_syncmem(dma, 0, len, isread ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); } parameter = 0; status = XHCI_TRB_2_IRQ_SET(0); /* the status stage has inverted direction */ control = ((isread && (len > 0)) ? 0 : XHCI_TRB_3_DIR_IN) | XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_STATUS_STAGE) | XHCI_TRB_3_IOC_BIT; xhci_xfer_put_trb(xx, i++, parameter, status, control); if (!polling) mutex_enter(&tr->xr_lock); xhci_ring_put_xfer(sc, tr, xx, i); if (!polling) mutex_exit(&tr->xr_lock); xhci_db_write_4(sc, XHCI_DOORBELL(xs->xs_idx), dci); out: if (xfer->ux_status == USBD_NOT_STARTED) { usbd_xfer_schedule_timeout(xfer); xfer->ux_status = USBD_IN_PROGRESS; } else { /* * We must be coming from xhci_pipe_restart -- timeout * already set up, nothing to do. */ } KASSERT(xfer->ux_status == USBD_IN_PROGRESS); return USBD_IN_PROGRESS; } static void xhci_device_ctrl_done(struct usbd_xfer *xfer) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); usb_device_request_t *req = &xfer->ux_request; int len = UGETW(req->wLength); int rd = req->bmRequestType & UT_READ; if (len) usb_syncmem(&xfer->ux_dmabuf, 0, len, rd ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); } static void xhci_device_ctrl_abort(struct usbd_xfer *xfer) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); usbd_xfer_abort(xfer); } static void xhci_device_ctrl_close(struct usbd_pipe *pipe) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); xhci_close_pipe(pipe); } /* ------------------ */ /* device isochronous */ static usbd_status xhci_device_isoc_transfer(struct usbd_xfer *xfer) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); return xhci_device_isoc_enter(xfer); } static usbd_status xhci_device_isoc_enter(struct usbd_xfer *xfer) { struct xhci_softc * const sc = XHCI_XFER2SC(xfer); struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); struct xhci_ring * const tr = xs->xs_xr[dci]; struct xhci_xfer * const xx = XHCI_XFER2XXFER(xfer); struct xhci_pipe * const xpipe = (struct xhci_pipe *)xfer->ux_pipe; uint32_t len = xfer->ux_length; usb_dma_t * const dma = &xfer->ux_dmabuf; uint64_t parameter; uint32_t status; uint32_t control; uint32_t mfindex; uint32_t offs; int i, ival; const bool polling = xhci_polling_p(sc); const uint16_t MPS = UGETW(xfer->ux_pipe->up_endpoint->ue_edesc->wMaxPacketSize); const uint16_t mps = UE_GET_SIZE(MPS); const uint8_t maxb = xpipe->xp_maxb; u_int tdpc, tbc, tlbpc; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("%#jx slot %ju dci %ju", (uintptr_t)xfer, xs->xs_idx, dci, 0); KASSERT(polling || mutex_owned(&sc->sc_lock)); if (sc->sc_dying) return USBD_IOERROR; KASSERT(xfer->ux_nframes != 0 && xfer->ux_frlengths); KASSERT((xfer->ux_rqflags & URQ_REQUEST) == 0); const bool isread = usbd_xfer_isread(xfer); if (xfer->ux_length) usb_syncmem(dma, 0, xfer->ux_length, isread ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); ival = xfer->ux_pipe->up_endpoint->ue_edesc->bInterval; if (ival >= 1 && ival <= 16) ival = 1 << (ival - 1); else ival = 1; /* fake something up */ if (xpipe->xp_isoc_next == -1) { mfindex = xhci_rt_read_4(sc, XHCI_MFINDEX); DPRINTF("mfindex %jx", (uintmax_t)mfindex, 0, 0, 0); mfindex = XHCI_MFINDEX_GET(mfindex + 1); mfindex /= USB_UFRAMES_PER_FRAME; mfindex += 7; /* 7 frames is max possible IST */ xpipe->xp_isoc_next = roundup2(mfindex, ival); } offs = 0; for (i = 0; i < xfer->ux_nframes; i++) { len = xfer->ux_frlengths[i]; tdpc = howmany(len, mps); tbc = howmany(tdpc, maxb) - 1; tlbpc = tdpc % maxb; tlbpc = tlbpc ? tlbpc - 1 : maxb - 1; KASSERTMSG(len <= 0x10000, "len %d", len); parameter = DMAADDR(dma, offs); status = XHCI_TRB_2_IRQ_SET(0) | XHCI_TRB_2_TDSZ_SET(0) | XHCI_TRB_2_BYTES_SET(len); control = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_ISOCH) | (isread ? XHCI_TRB_3_ISP_BIT : 0) | XHCI_TRB_3_TBC_SET(tbc) | XHCI_TRB_3_TLBPC_SET(tlbpc) | XHCI_TRB_3_IOC_BIT; if (XHCI_HCC_CFC(sc->sc_hcc)) { control |= XHCI_TRB_3_FRID_SET(xpipe->xp_isoc_next); #if 0 } else if (xpipe->xp_isoc_next == -1) { control |= XHCI_TRB_3_FRID_SET(xpipe->xp_isoc_next); #endif } else { control |= XHCI_TRB_3_ISO_SIA_BIT; } #if 0 if (i != xfer->ux_nframes - 1) control |= XHCI_TRB_3_BEI_BIT; #endif xhci_xfer_put_trb(xx, i, parameter, status, control); xpipe->xp_isoc_next += ival; offs += len; } xx->xx_isoc_done = 0; if (!polling) mutex_enter(&tr->xr_lock); xhci_ring_put_xfer(sc, tr, xx, i); if (!polling) mutex_exit(&tr->xr_lock); xfer->ux_status = USBD_IN_PROGRESS; xhci_db_write_4(sc, XHCI_DOORBELL(xs->xs_idx), dci); usbd_xfer_schedule_timeout(xfer); return USBD_IN_PROGRESS; } static void xhci_device_isoc_abort(struct usbd_xfer *xfer) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); usbd_xfer_abort(xfer); } static void xhci_device_isoc_close(struct usbd_pipe *pipe) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); xhci_close_pipe(pipe); } static void xhci_device_isoc_done(struct usbd_xfer *xfer) { #ifdef USB_DEBUG struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); #endif const bool isread = usbd_xfer_isread(xfer); XHCIHIST_FUNC(); XHCIHIST_CALLARGS("%#jx slot %ju dci %ju", (uintptr_t)xfer, xs->xs_idx, dci, 0); usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_length, isread ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); } /* ----------- */ /* device bulk */ static usbd_status xhci_device_bulk_transfer(struct usbd_xfer *xfer) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); /* Pipe isn't running, so start it first. */ return xhci_device_bulk_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue)); } static usbd_status xhci_device_bulk_start(struct usbd_xfer *xfer) { struct xhci_softc * const sc = XHCI_XFER2SC(xfer); struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); struct xhci_ring * const tr = xs->xs_xr[dci]; struct xhci_xfer * const xx = XHCI_XFER2XXFER(xfer); const uint32_t len = xfer->ux_length; usb_dma_t * const dma = &xfer->ux_dmabuf; uint64_t parameter; uint32_t status; uint32_t control; u_int i = 0; const bool polling = xhci_polling_p(sc); XHCIHIST_FUNC(); XHCIHIST_CALLARGS("%#jx slot %ju dci %ju", (uintptr_t)xfer, xs->xs_idx, dci, 0); KASSERT(polling || mutex_owned(&sc->sc_lock)); if (sc->sc_dying) return USBD_IOERROR; KASSERT((xfer->ux_rqflags & URQ_REQUEST) == 0); if (tr->is_halted) goto out; parameter = DMAADDR(dma, 0); const bool isread = usbd_xfer_isread(xfer); if (len) usb_syncmem(dma, 0, len, isread ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); /* * XXX: (dsl) The physical buffer must not cross a 64k boundary. * If the user supplied buffer crosses such a boundary then 2 * (or more) TRB should be used. * If multiple TRB are used the td_size field must be set correctly. * For v1.0 devices (like ivy bridge) this is the number of usb data * blocks needed to complete the transfer. * Setting it to 1 in the last TRB causes an extra zero-length * data block be sent. * The earlier documentation differs, I don't know how it behaves. */ KASSERTMSG(len <= 0x10000, "len %d", len); status = XHCI_TRB_2_IRQ_SET(0) | XHCI_TRB_2_TDSZ_SET(0) | XHCI_TRB_2_BYTES_SET(len); control = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_NORMAL) | (isread ? XHCI_TRB_3_ISP_BIT : 0) | XHCI_TRB_3_IOC_BIT; xhci_xfer_put_trb(xx, i++, parameter, status, control); if (!polling) mutex_enter(&tr->xr_lock); xhci_ring_put_xfer(sc, tr, xx, i); if (!polling) mutex_exit(&tr->xr_lock); xhci_db_write_4(sc, XHCI_DOORBELL(xs->xs_idx), dci); out: if (xfer->ux_status == USBD_NOT_STARTED) { xfer->ux_status = USBD_IN_PROGRESS; usbd_xfer_schedule_timeout(xfer); } else { /* * We must be coming from xhci_pipe_restart -- timeout * already set up, nothing to do. */ } KASSERT(xfer->ux_status == USBD_IN_PROGRESS); return USBD_IN_PROGRESS; } static void xhci_device_bulk_done(struct usbd_xfer *xfer) { #ifdef USB_DEBUG struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); #endif const bool isread = usbd_xfer_isread(xfer); XHCIHIST_FUNC(); XHCIHIST_CALLARGS("%#jx slot %ju dci %ju", (uintptr_t)xfer, xs->xs_idx, dci, 0); usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_length, isread ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); } static void xhci_device_bulk_abort(struct usbd_xfer *xfer) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); usbd_xfer_abort(xfer); } static void xhci_device_bulk_close(struct usbd_pipe *pipe) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); xhci_close_pipe(pipe); } /* ---------------- */ /* device interrupt */ static usbd_status xhci_device_intr_transfer(struct usbd_xfer *xfer) { XHCIHIST_FUNC(); XHCIHIST_CALLED(); /* Pipe isn't running, so start it first. */ return xhci_device_intr_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue)); } static usbd_status xhci_device_intr_start(struct usbd_xfer *xfer) { struct xhci_softc * const sc = XHCI_XFER2SC(xfer); struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); struct xhci_ring * const tr = xs->xs_xr[dci]; struct xhci_xfer * const xx = XHCI_XFER2XXFER(xfer); const uint32_t len = xfer->ux_length; const bool polling = xhci_polling_p(sc); usb_dma_t * const dma = &xfer->ux_dmabuf; uint64_t parameter; uint32_t status; uint32_t control; u_int i = 0; XHCIHIST_FUNC(); XHCIHIST_CALLARGS("%#jx slot %ju dci %ju", (uintptr_t)xfer, xs->xs_idx, dci, 0); KASSERT(polling || mutex_owned(&sc->sc_lock)); if (sc->sc_dying) return USBD_IOERROR; if (tr->is_halted) goto out; KASSERT((xfer->ux_rqflags & URQ_REQUEST) == 0); const bool isread = usbd_xfer_isread(xfer); if (len) usb_syncmem(dma, 0, len, isread ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); parameter = DMAADDR(dma, 0); KASSERTMSG(len <= 0x10000, "len %d", len); status = XHCI_TRB_2_IRQ_SET(0) | XHCI_TRB_2_TDSZ_SET(0) | XHCI_TRB_2_BYTES_SET(len); control = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_NORMAL) | (isread ? XHCI_TRB_3_ISP_BIT : 0) | XHCI_TRB_3_IOC_BIT; xhci_xfer_put_trb(xx, i++, parameter, status, control); if (!polling) mutex_enter(&tr->xr_lock); xhci_ring_put_xfer(sc, tr, xx, i); if (!polling) mutex_exit(&tr->xr_lock); xhci_db_write_4(sc, XHCI_DOORBELL(xs->xs_idx), dci); out: if (xfer->ux_status == USBD_NOT_STARTED) { xfer->ux_status = USBD_IN_PROGRESS; usbd_xfer_schedule_timeout(xfer); } else { /* * We must be coming from xhci_pipe_restart -- timeout * already set up, nothing to do. */ } KASSERT(xfer->ux_status == USBD_IN_PROGRESS); return USBD_IN_PROGRESS; } static void xhci_device_intr_done(struct usbd_xfer *xfer) { struct xhci_softc * const sc __diagused = XHCI_XFER2SC(xfer); #ifdef USB_DEBUG struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); #endif const bool isread = usbd_xfer_isread(xfer); XHCIHIST_FUNC(); XHCIHIST_CALLARGS("%#jx slot %ju dci %ju", (uintptr_t)xfer, xs->xs_idx, dci, 0); KASSERT(xhci_polling_p(sc) || mutex_owned(&sc->sc_lock)); usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_length, isread ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); } static void xhci_device_intr_abort(struct usbd_xfer *xfer) { struct xhci_softc * const sc __diagused = XHCI_XFER2SC(xfer); XHCIHIST_FUNC(); XHCIHIST_CALLARGS("%#jx", (uintptr_t)xfer, 0, 0, 0); KASSERT(mutex_owned(&sc->sc_lock)); usbd_xfer_abort(xfer); } static void xhci_device_intr_close(struct usbd_pipe *pipe) { //struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); XHCIHIST_FUNC(); XHCIHIST_CALLARGS("%#jx", (uintptr_t)pipe, 0, 0, 0); xhci_close_pipe(pipe); }