/* $NetBSD: umass.c,v 1.189 2022/09/22 14:27:52 riastradh Exp $ */ /* * Copyright (c) 2003 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (c) 1999 MAEKAWA Masahide , * Nick Hibma * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: src/sys/dev/usb/umass.c,v 1.13 2000/03/26 01:39:12 n_hibma Exp $ */ /* * Universal Serial Bus Mass Storage Class specs: * http://www.usb.org/developers/docs/devclass_docs/Mass_Storage_Specification_Overview_v1.4_2-19-2010.pdf * http://www.usb.org/developers/docs/devclass_docs/usbmassbulk_10.pdf * http://www.usb.org/developers/docs/devclass_docs/usb_msc_cbi_1.1.pdf * http://www.usb.org/developers/docs/devclass_docs/usbmass-ufi10.pdf */ /* * Ported to NetBSD by Lennart Augustsson . * Parts of the code written by Jason R. Thorpe . */ /* * The driver handles 3 Wire Protocols * - Command/Bulk/Interrupt (CBI) * - Command/Bulk/Interrupt with Command Completion Interrupt (CBI with CCI) * - Mass Storage Bulk-Only (BBB) * (BBB refers Bulk/Bulk/Bulk for Command/Data/Status phases) * * Over these wire protocols it handles the following command protocols * - SCSI * - 8070 (ATA/ATAPI for rewritable removable media) * - UFI (USB Floppy Interface) * * 8070i is a transformed version of the SCSI command set. UFI is a transformed * version of the 8070i command set. The sc->transform method is used to * convert the commands into the appropriate format (if at all necessary). * For example, ATAPI requires all commands to be 12 bytes in length amongst * other things. * * The source code below is marked and can be split into a number of pieces * (in this order): * * - probe/attach/detach * - generic transfer routines * - BBB * - CBI * - CBI_I (in addition to functions from CBI) * - CAM (Common Access Method) * - SCSI * - UFI * - 8070i * * The protocols are implemented using a state machine, for the transfers as * well as for the resets. The state machine is contained in umass_*_state. * The state machine is started through either umass_*_transfer or * umass_*_reset. * * The reason for doing this is a) CAM performs a lot better this way and b) it * avoids sleeping in interrupt context which is prohibited (for example after a * failed transfer). */ /* * The SCSI related part of this driver has been derived from the * dev/ppbus/vpo.c driver, by Nicolas Souchu (nsouch@freebsd.org). * * The CAM layer uses so called actions which are messages sent to the host * adapter for completion. The actions come in through umass_cam_action. The * appropriate block of routines is called depending on the transport protocol * in use. When the transfer has finished, these routines call * umass_cam_cb again to complete the CAM command. */ #include __KERNEL_RCSID(0, "$NetBSD: umass.c,v 1.189 2022/09/22 14:27:52 riastradh Exp $"); #ifdef _KERNEL_OPT #include "opt_usb.h" #endif #include "atapibus.h" #include "scsibus.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include SDT_PROBE_DEFINE1(usb, umass, device, attach__start, "struct umass_softc *"/*sc*/); SDT_PROBE_DEFINE2(usb, umass, device, attach__done, "struct umass_softc *"/*sc*/, "usbd_status"/*err*/); SDT_PROBE_DEFINE1(usb, umass, device, detach__start, "struct umass_softc *"/*sc*/); SDT_PROBE_DEFINE2(usb, umass, device, detach__done, "struct umass_softc *"/*sc*/, "int"/*error*/); SDT_PROBE_DEFINE7(usb, umass, transfer, start__bbb, "struct umass_softc *"/*sc*/, "transfer_cb_f"/*cb*/, "void *"/*priv*/, "void *"/*data*/, "int"/*datalen*/, "int"/*dir*/, "int"/*timeout*/); SDT_PROBE_DEFINE7(usb, umass, transfer, start__cbi, "struct umass_softc *"/*sc*/, "transfer_cb_f"/*cb*/, "void *"/*priv*/, "void *"/*data*/, "int"/*datalen*/, "int"/*dir*/, "int"/*timeout*/); SDT_PROBE_DEFINE7(usb, umass, transfer, done, "struct umass_softc *"/*sc*/, "transfer_cb_f"/*cb*/, "void *"/*priv*/, "void *"/*data*/, "int"/*datalen*/, "int"/*resid*/, "int"/*status*/); /* STATUS_* */ SDT_PROBE_DEFINE3(usb, umass, bbb, state, "struct umass_softc *"/*sc*/, "struct usbd_xfer *"/*xfer*/, "usbd_status"/*err*/); SDT_PROBE_DEFINE2(usb, umass, bbb, reset, "struct umass_softc *"/*sc*/, "int"/*status*/); SDT_PROBE_DEFINE3(usb, umass, cbi, state, "struct umass_softc *"/*sc*/, "struct usbd_xfer *"/*xfer*/, "usbd_status"/*err*/); SDT_PROBE_DEFINE2(usb, umass, cbi, reset, "struct umass_softc *"/*sc*/, "int"/*status*/); #ifdef USB_DEBUG #ifdef UMASS_DEBUG int umassdebug = 0; SYSCTL_SETUP(sysctl_hw_umass_setup, "sysctl hw.umass setup") { int err; const struct sysctlnode *rnode; const struct sysctlnode *cnode; err = sysctl_createv(clog, 0, NULL, &rnode, CTLFLAG_PERMANENT, CTLTYPE_NODE, "umass", SYSCTL_DESCR("umass global controls"), NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL); if (err) goto fail; /* control debugging printfs */ err = sysctl_createv(clog, 0, &rnode, &cnode, CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_INT, "debug", SYSCTL_DESCR("Enable debugging output"), NULL, 0, &umassdebug, sizeof(umassdebug), CTL_CREATE, CTL_EOL); if (err) goto fail; return; fail: aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err); } const char *states[TSTATE_STATES+1] = { /* should be kept in sync with the list at transfer_state */ "Idle", "BBB CBW", "BBB Data", "BBB Data bulk-in/-out clear stall", "BBB CSW, 1st attempt", "BBB CSW bulk-in clear stall", "BBB CSW, 2nd attempt", "BBB Reset", "BBB bulk-in clear stall", "BBB bulk-out clear stall", "CBI Command", "CBI Data", "CBI Status", "CBI Data bulk-in/-out clear stall", "CBI Status intr-in clear stall", "CBI Reset", "CBI bulk-in clear stall", "CBI bulk-out clear stall", NULL }; #endif #endif /* USB device probe/attach/detach functions */ static int umass_match(device_t, cfdata_t, void *); static void umass_attach(device_t, device_t, void *); static int umass_detach(device_t, int); static void umass_childdet(device_t, device_t); static int umass_activate(device_t, enum devact); CFATTACH_DECL2_NEW(umass, sizeof(struct umass_softc), umass_match, umass_attach, umass_detach, umass_activate, NULL, umass_childdet); Static void umass_disco(struct umass_softc *sc); /* generic transfer functions */ Static usbd_status umass_setup_transfer(struct umass_softc *, struct usbd_pipe *, void *, int, int, struct usbd_xfer *); Static usbd_status umass_setup_ctrl_transfer(struct umass_softc *, usb_device_request_t *, void *, int, int, struct usbd_xfer *); Static void umass_clear_endpoint_stall(struct umass_softc *, int, struct usbd_xfer *); Static void umass_transfer_done(struct umass_softc *, int, int); Static void umass_transfer_reset(struct umass_softc *); #if 0 Static void umass_reset(struct umass_softc *, transfer_cb_f, void *); #endif /* Bulk-Only related functions */ Static void umass_bbb_transfer(struct umass_softc *, int, void *, int, void *, int, int, u_int, int, umass_callback, void *); Static void umass_bbb_reset(struct umass_softc *, int); Static void umass_bbb_state(struct usbd_xfer *, void *, usbd_status); static usbd_status umass_bbb_get_max_lun(struct umass_softc *, uint8_t *); /* CBI related functions */ Static void umass_cbi_transfer(struct umass_softc *, int, void *, int, void *, int, int, u_int, int, umass_callback, void *); Static void umass_cbi_reset(struct umass_softc *, int); Static void umass_cbi_state(struct usbd_xfer *, void *, usbd_status); Static int umass_cbi_adsc(struct umass_softc *, char *, int, int, struct usbd_xfer *); const struct umass_wire_methods umass_bbb_methods = { .wire_xfer = umass_bbb_transfer, .wire_reset = umass_bbb_reset, .wire_state = umass_bbb_state }; const struct umass_wire_methods umass_cbi_methods = { .wire_xfer = umass_cbi_transfer, .wire_reset = umass_cbi_reset, .wire_state = umass_cbi_state }; #ifdef UMASS_DEBUG /* General debugging functions */ Static void umass_bbb_dump_cbw(struct umass_softc *, umass_bbb_cbw_t *); Static void umass_bbb_dump_csw(struct umass_softc *, umass_bbb_csw_t *); Static void umass_dump_buffer(struct umass_softc *, uint8_t *, int, int); #endif /* * USB device probe/attach/detach */ static int umass_match(device_t parent, cfdata_t match, void *aux) { struct usbif_attach_arg *uiaa = aux; const struct umass_quirk *quirk; quirk = umass_lookup(uiaa->uiaa_vendor, uiaa->uiaa_product); if (quirk != NULL && quirk->uq_match != UMASS_QUIRK_USE_DEFAULTMATCH) return quirk->uq_match; if (uiaa->uiaa_class != UICLASS_MASS) return UMATCH_NONE; switch (uiaa->uiaa_subclass) { case UISUBCLASS_RBC: case UISUBCLASS_SFF8020I: case UISUBCLASS_QIC157: case UISUBCLASS_UFI: case UISUBCLASS_SFF8070I: case UISUBCLASS_SCSI: break; default: return UMATCH_IFACECLASS; } switch (uiaa->uiaa_proto) { case UIPROTO_MASS_CBI_I: case UIPROTO_MASS_CBI: case UIPROTO_MASS_BBB_OLD: case UIPROTO_MASS_BBB: break; default: return UMATCH_IFACECLASS_IFACESUBCLASS; } return UMATCH_IFACECLASS_IFACESUBCLASS_IFACEPROTO; } static void umass_attach(device_t parent, device_t self, void *aux) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); struct umass_softc *sc = device_private(self); struct usbif_attach_arg *uiaa = aux; const struct umass_quirk *quirk; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed; const char *sWire, *sCommand; char *devinfop; usbd_status err; int i, error; SDT_PROBE1(usb, umass, device, attach__start, sc); sc->sc_dev = self; aprint_naive("\n"); aprint_normal("\n"); mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTUSB); devinfop = usbd_devinfo_alloc(uiaa->uiaa_device, 0); aprint_normal_dev(self, "%s\n", devinfop); usbd_devinfo_free(devinfop); sc->sc_udev = uiaa->uiaa_device; sc->sc_iface = uiaa->uiaa_iface; sc->sc_ifaceno = uiaa->uiaa_ifaceno; quirk = umass_lookup(uiaa->uiaa_vendor, uiaa->uiaa_product); if (quirk != NULL) { sc->sc_wire = quirk->uq_wire; sc->sc_cmd = quirk->uq_cmd; sc->sc_quirks = quirk->uq_flags; sc->sc_busquirks = quirk->uq_busquirks; if (quirk->uq_fixup != NULL) (*quirk->uq_fixup)(sc); } else { sc->sc_wire = UMASS_WPROTO_UNSPEC; sc->sc_cmd = UMASS_CPROTO_UNSPEC; sc->sc_quirks = 0; sc->sc_busquirks = 0; } if (sc->sc_wire == UMASS_WPROTO_UNSPEC) { switch (uiaa->uiaa_proto) { case UIPROTO_MASS_CBI: sc->sc_wire = UMASS_WPROTO_CBI; break; case UIPROTO_MASS_CBI_I: sc->sc_wire = UMASS_WPROTO_CBI_I; break; case UIPROTO_MASS_BBB: case UIPROTO_MASS_BBB_OLD: sc->sc_wire = UMASS_WPROTO_BBB; break; default: DPRINTFM(UDMASS_GEN, "Unsupported wire protocol %ju", uiaa->uiaa_proto, 0, 0, 0); SDT_PROBE2(usb, umass, device, attach__done, sc, USBD_IOERROR); return; } } if (sc->sc_cmd == UMASS_CPROTO_UNSPEC) { switch (uiaa->uiaa_subclass) { case UISUBCLASS_SCSI: sc->sc_cmd = UMASS_CPROTO_SCSI; break; case UISUBCLASS_UFI: sc->sc_cmd = UMASS_CPROTO_UFI; break; case UISUBCLASS_SFF8020I: case UISUBCLASS_SFF8070I: case UISUBCLASS_QIC157: sc->sc_cmd = UMASS_CPROTO_ATAPI; break; case UISUBCLASS_RBC: sc->sc_cmd = UMASS_CPROTO_RBC; break; default: DPRINTFM(UDMASS_GEN, "Unsupported command protocol %ju", uiaa->uiaa_subclass, 0, 0, 0); SDT_PROBE2(usb, umass, device, attach__done, sc, USBD_IOERROR); return; } } switch (sc->sc_wire) { case UMASS_WPROTO_CBI: sWire = "CBI"; break; case UMASS_WPROTO_CBI_I: sWire = "CBI with CCI"; break; case UMASS_WPROTO_BBB: sWire = "Bulk-Only"; break; default: sWire = "unknown"; break; } switch (sc->sc_cmd) { case UMASS_CPROTO_RBC: sCommand = "RBC"; break; case UMASS_CPROTO_SCSI: sCommand = "SCSI"; break; case UMASS_CPROTO_UFI: sCommand = "UFI"; break; case UMASS_CPROTO_ATAPI: sCommand = "ATAPI"; break; case UMASS_CPROTO_ISD_ATA: sCommand = "ISD-ATA"; break; default: sCommand = "unknown"; break; } aprint_verbose_dev(self, "using %s over %s\n", sCommand, sWire); if (quirk != NULL && quirk->uq_init != NULL) { err = (*quirk->uq_init)(sc); if (err) { aprint_error_dev(self, "quirk init failed\n"); SDT_PROBE2(usb, umass, device, attach__done, sc, err); umass_disco(sc); return; } } /* * In addition to the Control endpoint the following endpoints * are required: * a) bulk-in endpoint. * b) bulk-out endpoint. * and for Control/Bulk/Interrupt with CCI (CBI_I) * c) intr-in * * The endpoint addresses are not fixed, so we have to read them * from the device descriptors of the current interface. */ id = usbd_get_interface_descriptor(sc->sc_iface); for (i = 0 ; i < id->bNumEndpoints ; i++) { ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i); if (ed == NULL) { aprint_error_dev(self, "could not read endpoint descriptor\n"); SDT_PROBE2(usb, umass, device, attach__done, sc, USBD_IOERROR); return; } if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { sc->sc_epaddr[UMASS_BULKIN] = ed->bEndpointAddress; } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { sc->sc_epaddr[UMASS_BULKOUT] = ed->bEndpointAddress; } else if (sc->sc_wire == UMASS_WPROTO_CBI_I && UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && (ed->bmAttributes & UE_XFERTYPE) == UE_INTERRUPT) { sc->sc_epaddr[UMASS_INTRIN] = ed->bEndpointAddress; #ifdef UMASS_DEBUG if (UGETW(ed->wMaxPacketSize) > 2) { DPRINTFM(UDMASS_CBI, "sc %#jx intr size is %jd", (uintptr_t)sc, UGETW(ed->wMaxPacketSize), 0, 0); } #endif } } /* check whether we found all the endpoints we need */ if (!sc->sc_epaddr[UMASS_BULKIN] || !sc->sc_epaddr[UMASS_BULKOUT] || (sc->sc_wire == UMASS_WPROTO_CBI_I && !sc->sc_epaddr[UMASS_INTRIN])) { aprint_error_dev(self, "endpoint not found %u/%u/%u\n", sc->sc_epaddr[UMASS_BULKIN], sc->sc_epaddr[UMASS_BULKOUT], sc->sc_epaddr[UMASS_INTRIN]); return; } /* * Get the maximum LUN supported by the device. */ if (sc->sc_wire == UMASS_WPROTO_BBB && (sc->sc_quirks & UMASS_QUIRK_NOGETMAXLUN) == 0) { err = umass_bbb_get_max_lun(sc, &sc->maxlun); if (err) { aprint_error_dev(self, "unable to get Max Lun: %s\n", usbd_errstr(err)); SDT_PROBE2(usb, umass, device, attach__done, sc, err); return; } if (sc->maxlun > 0) sc->sc_busquirks |= PQUIRK_FORCELUNS; } else { sc->maxlun = 0; } /* Open the bulk-in and -out pipe */ DPRINTFM(UDMASS_USB, "sc %#jx: opening iface %#jx epaddr %jd for " "BULKOUT", (uintptr_t)sc, (uintptr_t)sc->sc_iface, sc->sc_epaddr[UMASS_BULKOUT], 0); err = usbd_open_pipe(sc->sc_iface, sc->sc_epaddr[UMASS_BULKOUT], USBD_EXCLUSIVE_USE | USBD_MPSAFE, &sc->sc_pipe[UMASS_BULKOUT]); if (err) { aprint_error_dev(self, "cannot open %u-out pipe (bulk)\n", sc->sc_epaddr[UMASS_BULKOUT]); SDT_PROBE2(usb, umass, device, attach__done, sc, err); umass_disco(sc); return; } DPRINTFM(UDMASS_USB, "sc %#jx: opening iface %#jx epaddr %jd for " "BULKIN", (uintptr_t)sc, (uintptr_t)sc->sc_iface, sc->sc_epaddr[UMASS_BULKIN], 0); err = usbd_open_pipe(sc->sc_iface, sc->sc_epaddr[UMASS_BULKIN], USBD_EXCLUSIVE_USE | USBD_MPSAFE, &sc->sc_pipe[UMASS_BULKIN]); if (err) { aprint_error_dev(self, "could not open %u-in pipe (bulk)\n", sc->sc_epaddr[UMASS_BULKIN]); SDT_PROBE2(usb, umass, device, attach__done, sc, err); umass_disco(sc); return; } /* * Open the intr-in pipe if the protocol is CBI with CCI. * Note: early versions of the Zip drive do have an interrupt pipe, but * this pipe is unused * * We do not open the interrupt pipe as an interrupt pipe, but as a * normal bulk endpoint. We send an IN transfer down the wire at the * appropriate time, because we know exactly when to expect data on * that endpoint. This saves bandwidth, but more important, makes the * code for handling the data on that endpoint simpler. No data * arriving concurrently. */ if (sc->sc_wire == UMASS_WPROTO_CBI_I) { DPRINTFM(UDMASS_USB, "sc %#jx: opening iface %#jx epaddr %jd for INTRIN", (uintptr_t)sc, (uintptr_t)sc->sc_iface, sc->sc_epaddr[UMASS_INTRIN], 0); err = usbd_open_pipe(sc->sc_iface, sc->sc_epaddr[UMASS_INTRIN], USBD_EXCLUSIVE_USE | USBD_MPSAFE, &sc->sc_pipe[UMASS_INTRIN]); if (err) { aprint_error_dev(self, "couldn't open %u-in (intr)\n", sc->sc_epaddr[UMASS_INTRIN]); SDT_PROBE2(usb, umass, device, attach__done, sc, err); umass_disco(sc); return; } } /* initialisation of generic part */ sc->transfer_state = TSTATE_IDLE; for (i = 0; i < XFER_NR; i++) { sc->transfer_xfer[i] = NULL; } /* * Create the transfers */ struct usbd_pipe *pipe0 = usbd_get_pipe0(sc->sc_udev); switch (sc->sc_wire) { case UMASS_WPROTO_BBB: err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKIN], UMASS_MAX_TRANSFER_SIZE, 0, 0, &sc->transfer_xfer[XFER_BBB_DATAIN]); if (err) goto fail_create; err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKOUT], UMASS_MAX_TRANSFER_SIZE, 0, 0, &sc->transfer_xfer[XFER_BBB_DATAOUT]); if (err) goto fail_create; err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKOUT], UMASS_BBB_CBW_SIZE, 0, 0, &sc->transfer_xfer[XFER_BBB_CBW]); if (err) goto fail_create; err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKIN], UMASS_BBB_CSW_SIZE, 0, 0, &sc->transfer_xfer[XFER_BBB_CSW1]); if (err) goto fail_create; err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKIN], UMASS_BBB_CSW_SIZE, 0, 0, &sc->transfer_xfer[XFER_BBB_CSW2]); if (err) goto fail_create; err = usbd_create_xfer(pipe0, 0, 0, 0, &sc->transfer_xfer[XFER_BBB_SCLEAR]); if (err) goto fail_create; err = usbd_create_xfer(pipe0, 0, 0, 0, &sc->transfer_xfer[XFER_BBB_DCLEAR]); if (err) goto fail_create; err = usbd_create_xfer(pipe0, 0, 0, 0, &sc->transfer_xfer[XFER_BBB_RESET1]); if (err) goto fail_create; err = usbd_create_xfer(pipe0, 0, 0, 0, &sc->transfer_xfer[XFER_BBB_RESET2]); if (err) goto fail_create; err = usbd_create_xfer(pipe0, 0, 0, 0, &sc->transfer_xfer[XFER_BBB_RESET3]); if (err) goto fail_create; break; case UMASS_WPROTO_CBI: case UMASS_WPROTO_CBI_I: err = usbd_create_xfer(pipe0, sizeof(sc->cbl), 0, 0, &sc->transfer_xfer[XFER_CBI_CB]); if (err) goto fail_create; err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKIN], UMASS_MAX_TRANSFER_SIZE, 0, 0, &sc->transfer_xfer[XFER_CBI_DATAIN]); if (err) goto fail_create; err = usbd_create_xfer(sc->sc_pipe[UMASS_BULKOUT], UMASS_MAX_TRANSFER_SIZE, 0, 0, &sc->transfer_xfer[XFER_CBI_DATAOUT]); if (err) goto fail_create; err = usbd_create_xfer(sc->sc_pipe[UMASS_INTRIN], sizeof(sc->sbl), 0, 0, &sc->transfer_xfer[XFER_CBI_STATUS]); if (err) goto fail_create; err = usbd_create_xfer(pipe0, 0, 0, 0, &sc->transfer_xfer[XFER_CBI_DCLEAR]); if (err) goto fail_create; err = usbd_create_xfer(pipe0, 0, 0, 0, &sc->transfer_xfer[XFER_CBI_SCLEAR]); if (err) goto fail_create; err = usbd_create_xfer(pipe0, sizeof(sc->cbl), 0, 0, &sc->transfer_xfer[XFER_CBI_RESET1]); if (err) goto fail_create; err = usbd_create_xfer(pipe0, sizeof(sc->cbl), 0, 0, &sc->transfer_xfer[XFER_CBI_RESET2]); if (err) goto fail_create; err = usbd_create_xfer(pipe0, sizeof(sc->cbl), 0, 0, &sc->transfer_xfer[XFER_CBI_RESET3]); if (err) goto fail_create; break; default: fail_create: aprint_error_dev(self, "failed to create xfers\n"); SDT_PROBE2(usb, umass, device, attach__done, sc, err); umass_disco(sc); return; } /* * Record buffer pointers for data transfer (it's huge), command and * status data here */ switch (sc->sc_wire) { case UMASS_WPROTO_BBB: sc->datain_buffer = usbd_get_buffer(sc->transfer_xfer[XFER_BBB_DATAIN]); sc->dataout_buffer = usbd_get_buffer(sc->transfer_xfer[XFER_BBB_DATAOUT]); sc->cmd_buffer = usbd_get_buffer(sc->transfer_xfer[XFER_BBB_CBW]); sc->s1_buffer = usbd_get_buffer(sc->transfer_xfer[XFER_BBB_CSW1]); sc->s2_buffer = usbd_get_buffer(sc->transfer_xfer[XFER_BBB_CSW2]); break; case UMASS_WPROTO_CBI: case UMASS_WPROTO_CBI_I: sc->datain_buffer = usbd_get_buffer(sc->transfer_xfer[XFER_CBI_DATAIN]); sc->dataout_buffer = usbd_get_buffer(sc->transfer_xfer[XFER_CBI_DATAOUT]); sc->cmd_buffer = usbd_get_buffer(sc->transfer_xfer[XFER_CBI_CB]); sc->s1_buffer = usbd_get_buffer(sc->transfer_xfer[XFER_CBI_STATUS]); sc->s2_buffer = usbd_get_buffer(sc->transfer_xfer[XFER_CBI_RESET1]); break; default: break; } /* Initialise the wire protocol specific methods */ switch (sc->sc_wire) { case UMASS_WPROTO_BBB: sc->sc_methods = &umass_bbb_methods; break; case UMASS_WPROTO_CBI: case UMASS_WPROTO_CBI_I: sc->sc_methods = &umass_cbi_methods; break; default: umass_disco(sc); return; } error = 0; switch (sc->sc_cmd) { case UMASS_CPROTO_RBC: case UMASS_CPROTO_SCSI: #if NSCSIBUS > 0 error = umass_scsi_attach(sc); #else aprint_error_dev(self, "scsibus not configured\n"); #endif break; case UMASS_CPROTO_UFI: case UMASS_CPROTO_ATAPI: #if NATAPIBUS > 0 error = umass_atapi_attach(sc); #else aprint_error_dev(self, "atapibus not configured\n"); #endif break; default: aprint_error_dev(self, "command protocol=%#x not supported\n", sc->sc_cmd); umass_disco(sc); return; } if (error) { aprint_error_dev(self, "bus attach failed\n"); SDT_PROBE2(usb, umass, device, attach__done, sc, USBD_IOERROR); umass_disco(sc); return; } usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, sc->sc_dev); if (!pmf_device_register(self, NULL, NULL)) aprint_error_dev(self, "couldn't establish power handler\n"); DPRINTFM(UDMASS_GEN, "sc %#jx: Attach finished", (uintptr_t)sc, 0, 0, 0); SDT_PROBE2(usb, umass, device, attach__done, sc, 0); return; } static void umass_childdet(device_t self, device_t child) { struct umass_softc *sc = device_private(self); KASSERTMSG(child == sc->bus->sc_child, "assertion child == sc->bus->sc_child failed\n"); sc->bus->sc_child = NULL; } static int umass_detach(device_t self, int flags) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); struct umass_softc *sc = device_private(self); struct umassbus_softc *scbus; int rv = 0, i; DPRINTFM(UDMASS_USB, "sc %#jx detached", (uintptr_t)sc, 0, 0, 0); SDT_PROBE1(usb, umass, device, detach__start, sc); mutex_enter(&sc->sc_lock); sc->sc_dying = true; mutex_exit(&sc->sc_lock); pmf_device_deregister(self); /* Abort the pipes to wake up any waiting processes. */ for (i = 0 ; i < UMASS_NEP ; i++) { if (sc->sc_pipe[i] != NULL) usbd_abort_pipe(sc->sc_pipe[i]); } usbd_abort_default_pipe(sc->sc_udev); scbus = sc->bus; if (scbus != NULL) { if (scbus->sc_child != NULL) rv = config_detach(scbus->sc_child, flags); switch (sc->sc_cmd) { case UMASS_CPROTO_RBC: case UMASS_CPROTO_SCSI: #if NSCSIBUS > 0 umass_scsi_detach(sc); #else aprint_error_dev(self, "scsibus not configured\n"); #endif break; case UMASS_CPROTO_UFI: case UMASS_CPROTO_ATAPI: #if NATAPIBUS > 0 umass_atapi_detach(sc); #else aprint_error_dev(self, "atapibus not configured\n"); #endif break; default: /* nothing to do */ break; } /* protocol detach is expected to free sc->bus */ KASSERT(sc->bus == NULL); } if (rv) goto out; umass_disco(sc); usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, sc->sc_dev); mutex_destroy(&sc->sc_lock); out: SDT_PROBE2(usb, umass, device, detach__done, sc, rv); return rv; } static int umass_activate(device_t dev, enum devact act) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); struct umass_softc *sc = device_private(dev); DPRINTFM(UDMASS_USB, "sc %#jx act %jd", (uintptr_t)sc, act, 0, 0); switch (act) { case DVACT_DEACTIVATE: sc->sc_dying = 1; return 0; default: return EOPNOTSUPP; } } Static void umass_disco(struct umass_softc *sc) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); int i; /* Remove all the pipes. */ for (i = 0 ; i < UMASS_NEP ; i++) { if (sc->sc_pipe[i] != NULL) { usbd_abort_pipe(sc->sc_pipe[i]); } } /* Some xfers may be queued in the default pipe */ usbd_abort_default_pipe(sc->sc_udev); /* Free the xfers. */ for (i = 0; i < XFER_NR; i++) { if (sc->transfer_xfer[i] != NULL) { usbd_destroy_xfer(sc->transfer_xfer[i]); sc->transfer_xfer[i] = NULL; } } for (i = 0 ; i < UMASS_NEP ; i++) { if (sc->sc_pipe[i] != NULL) { usbd_close_pipe(sc->sc_pipe[i]); sc->sc_pipe[i] = NULL; } } } /* * Generic functions to handle transfers */ Static usbd_status umass_setup_transfer(struct umass_softc *sc, struct usbd_pipe *pipe, void *buffer, int buflen, int flags, struct usbd_xfer *xfer) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); usbd_status err; if (sc->sc_dying) return USBD_IOERROR; /* Initialise a USB transfer and then schedule it */ usbd_setup_xfer(xfer, sc, buffer, buflen, flags, sc->timeout, sc->sc_methods->wire_state); err = usbd_transfer(xfer); DPRINTFM(UDMASS_XFER, "start xfer buffer=%#jx buflen=%jd flags=%#jx " "timeout=%jd", (uintptr_t)buffer, buflen, flags, sc->timeout); if (err && err != USBD_IN_PROGRESS) { DPRINTFM(UDMASS_BBB, "failed to setup transfer... err=%jd", err, 0, 0, 0); return err; } return USBD_NORMAL_COMPLETION; } Static usbd_status umass_setup_ctrl_transfer(struct umass_softc *sc, usb_device_request_t *req, void *buffer, int buflen, int flags, struct usbd_xfer *xfer) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); usbd_status err; if (sc->sc_dying) return USBD_IOERROR; /* Initialise a USB control transfer and then schedule it */ usbd_setup_default_xfer(xfer, sc->sc_udev, sc, USBD_DEFAULT_TIMEOUT, req, buffer, buflen, flags, sc->sc_methods->wire_state); err = usbd_transfer(xfer); if (err && err != USBD_IN_PROGRESS) { DPRINTFM(UDMASS_BBB, "failed to setup ctrl transfer... err=%jd", err, 0, 0, 0); /* do not reset, as this would make us loop */ return err; } return USBD_NORMAL_COMPLETION; } Static void umass_clear_endpoint_stall(struct umass_softc *sc, int endpt, struct usbd_xfer *xfer) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); if (sc->sc_dying) { umass_transfer_done(sc, sc->transfer_datalen, STATUS_WIRE_FAILED); return; } DPRINTFM(UDMASS_BBB, "Clear endpoint 0x%02jx stall", sc->sc_epaddr[endpt], 0, 0, 0); usbd_clear_endpoint_toggle(sc->sc_pipe[endpt]); sc->sc_req.bmRequestType = UT_WRITE_ENDPOINT; sc->sc_req.bRequest = UR_CLEAR_FEATURE; USETW(sc->sc_req.wValue, UF_ENDPOINT_HALT); USETW(sc->sc_req.wIndex, sc->sc_epaddr[endpt]); USETW(sc->sc_req.wLength, 0); if (umass_setup_ctrl_transfer(sc, &sc->sc_req, NULL, 0, 0, xfer)) umass_transfer_done(sc, sc->transfer_datalen, STATUS_WIRE_FAILED); } Static void umass_transfer_done(struct umass_softc *sc, int residue, int status) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); sc->transfer_state = TSTATE_IDLE; SDT_PROBE7(usb, umass, transfer, done, sc, sc->transfer_cb, sc->transfer_priv, sc->transfer_data, sc->transfer_datalen, residue, status); sc->transfer_cb(sc, sc->transfer_priv, residue, status); } Static void umass_transfer_reset(struct umass_softc *sc) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); sc->transfer_state = TSTATE_IDLE; if (sc->transfer_priv) { SDT_PROBE7(usb, umass, transfer, done, sc, sc->transfer_cb, sc->transfer_priv, sc->transfer_data, sc->transfer_datalen, sc->transfer_datalen, sc->transfer_status); sc->transfer_cb(sc, sc->transfer_priv, sc->transfer_datalen, sc->transfer_status); } } #if 0 Static void umass_reset(struct umass_softc *sc, transfer_cb_f cb, void *priv) { sc->transfer_cb = cb; sc->transfer_priv = priv; /* The reset is a forced reset, so no error (yet) */ sc->reset(sc, STATUS_CMD_OK); } #endif /* * Bulk protocol specific functions */ Static void umass_bbb_reset(struct umass_softc *sc, int status) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); SDT_PROBE2(usb, umass, bbb, reset, sc, status); KASSERTMSG(sc->sc_wire & UMASS_WPROTO_BBB, "sc->sc_wire == 0x%02x wrong for umass_bbb_reset\n", sc->sc_wire); if (sc->sc_dying) { umass_transfer_done(sc, sc->transfer_datalen, status); return; } /* * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class) * * For Reset Recovery the host shall issue in the following order: * a) a Bulk-Only Mass Storage Reset * b) a Clear Feature HALT to the Bulk-In endpoint * c) a Clear Feature HALT to the Bulk-Out endpoint * * This is done in 3 steps, states: * TSTATE_BBB_RESET1 * TSTATE_BBB_RESET2 * TSTATE_BBB_RESET3 * * If the reset doesn't succeed, the device should be port reset. */ DPRINTFM(UDMASS_BBB, "Bulk Reset", 0, 0, 0, 0); sc->transfer_state = TSTATE_BBB_RESET1; sc->transfer_status = status; /* reset is a class specific interface write */ sc->sc_req.bmRequestType = UT_WRITE_CLASS_INTERFACE; sc->sc_req.bRequest = UR_BBB_RESET; USETW(sc->sc_req.wValue, 0); USETW(sc->sc_req.wIndex, sc->sc_ifaceno); USETW(sc->sc_req.wLength, 0); if (umass_setup_ctrl_transfer(sc, &sc->sc_req, NULL, 0, 0, sc->transfer_xfer[XFER_BBB_RESET1])) umass_transfer_done(sc, sc->transfer_datalen, status); } Static void umass_bbb_transfer(struct umass_softc *sc, int lun, void *cmd, int cmdlen, void *data, int datalen, int dir, u_int timeout, int flags, umass_callback cb, void *priv) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); SDT_PROBE7(usb, umass, transfer, start__bbb, sc, cb, priv, data, datalen, dir, timeout); static int dCBWtag = 42; /* unique for CBW of transfer */ KASSERT(cb); DPRINTFM(UDMASS_BBB, "sc %#jx cmd=0x%02jx", (uintptr_t)sc, *(u_char *)cmd, 0, 0); KASSERTMSG(sc->sc_wire & UMASS_WPROTO_BBB, "sc->sc_wire == 0x%02x wrong for umass_bbb_transfer\n", sc->sc_wire); if (sc->sc_dying) { SDT_PROBE7(usb, umass, transfer, done, sc, cb, priv, data, datalen, datalen, STATUS_WIRE_FAILED); cb(sc, priv, datalen, STATUS_WIRE_FAILED); return; } /* Be a little generous. */ sc->timeout = timeout + USBD_DEFAULT_TIMEOUT; /* * Do a Bulk-Only transfer with cmdlen bytes from cmd, possibly * a data phase of datalen bytes from/to the device and finally a * csw read phase. * If the data direction was inbound a maximum of datalen bytes * is stored in the buffer pointed to by data. * * umass_bbb_transfer initialises the transfer and lets the state * machine in umass_bbb_state handle the completion. It uses the * following states: * TSTATE_BBB_COMMAND * -> TSTATE_BBB_DATA * -> TSTATE_BBB_STATUS * -> TSTATE_BBB_STATUS2 * -> TSTATE_BBB_IDLE * * An error in any of those states will invoke * umass_bbb_reset. */ /* check the given arguments */ KASSERTMSG(datalen == 0 || data != NULL, "%s: datalen > 0, but no buffer",device_xname(sc->sc_dev)); KASSERTMSG(cmdlen <= CBWCDBLENGTH, "%s: cmdlen exceeds CDB length in CBW (%d > %d)", device_xname(sc->sc_dev), cmdlen, CBWCDBLENGTH); KASSERTMSG(dir == DIR_NONE || datalen > 0, "%s: datalen == 0 while direction is not NONE\n", device_xname(sc->sc_dev)); KASSERTMSG(datalen == 0 || dir != DIR_NONE, "%s: direction is NONE while datalen is not zero\n", device_xname(sc->sc_dev)); /* CTASSERT */ KASSERTMSG(sizeof(umass_bbb_cbw_t) == UMASS_BBB_CBW_SIZE, "%s: CBW struct does not have the right size (%zu vs. %u)\n", device_xname(sc->sc_dev), sizeof(umass_bbb_cbw_t), UMASS_BBB_CBW_SIZE); /* CTASSERT */ KASSERTMSG(sizeof(umass_bbb_csw_t) == UMASS_BBB_CSW_SIZE, "%s: CSW struct does not have the right size (%zu vs. %u)\n", device_xname(sc->sc_dev), sizeof(umass_bbb_csw_t), UMASS_BBB_CSW_SIZE); /* * Determine the direction of the data transfer and the length. * * dCBWDataTransferLength (datalen) : * This field indicates the number of bytes of data that the host * intends to transfer on the IN or OUT Bulk endpoint(as indicated by * the Direction bit) during the execution of this command. If this * field is set to 0, the device will expect that no data will be * transferred IN or OUT during this command, regardless of the value * of the Direction bit defined in dCBWFlags. * * dCBWFlags (dir) : * The bits of the Flags field are defined as follows: * Bits 0-6 reserved * Bit 7 Direction - this bit shall be ignored if the * dCBWDataTransferLength field is zero. * 0 = data Out from host to device * 1 = data In from device to host */ /* Fill in the Command Block Wrapper */ USETDW(sc->cbw.dCBWSignature, CBWSIGNATURE); USETDW(sc->cbw.dCBWTag, dCBWtag); dCBWtag++; /* cannot be done in macro (it will be done 4 times) */ USETDW(sc->cbw.dCBWDataTransferLength, datalen); /* DIR_NONE is treated as DIR_OUT (0x00) */ sc->cbw.bCBWFlags = (dir == DIR_IN? CBWFLAGS_IN:CBWFLAGS_OUT); sc->cbw.bCBWLUN = lun; sc->cbw.bCDBLength = cmdlen; memcpy(sc->cbw.CBWCDB, cmd, cmdlen); DIF(UDMASS_BBB, umass_bbb_dump_cbw(sc, &sc->cbw)); /* store the details for the data transfer phase */ sc->transfer_dir = dir; sc->transfer_data = data; sc->transfer_datalen = datalen; sc->transfer_actlen = 0; sc->transfer_cb = cb; sc->transfer_priv = priv; sc->transfer_status = STATUS_CMD_OK; /* move from idle to the command state */ sc->transfer_state = TSTATE_BBB_COMMAND; /* Send the CBW from host to device via bulk-out endpoint. */ if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKOUT], &sc->cbw, UMASS_BBB_CBW_SIZE, flags, sc->transfer_xfer[XFER_BBB_CBW])) { umass_bbb_reset(sc, STATUS_WIRE_FAILED); } } Static void umass_bbb_state(struct usbd_xfer *xfer, void *priv, usbd_status err) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); struct umass_softc *sc = (struct umass_softc *) priv; struct usbd_xfer *next_xfer; int residue; SDT_PROBE3(usb, umass, bbb, state, sc, xfer, err); KASSERTMSG(sc->sc_wire & UMASS_WPROTO_BBB, "sc->sc_wire == 0x%02x wrong for umass_bbb_state\n", sc->sc_wire); /* * State handling for BBB transfers. * * The subroutine is rather long. It steps through the states given in * Annex A of the Bulk-Only specification. * Each state first does the error handling of the previous transfer * and then prepares the next transfer. * Each transfer is done asynchroneously so after the request/transfer * has been submitted you will find a 'return;'. */ DPRINTFM(UDMASS_BBB, "sc %#jx xfer %#jx, transfer_state %jd dir %jd", (uintptr_t)sc, (uintptr_t)xfer, sc->transfer_state, sc->transfer_dir); if (err == USBD_CANCELLED) { DPRINTFM(UDMASS_BBB, "sc %#jx xfer %#jx cancelled", (uintptr_t)sc, (uintptr_t)xfer, 0, 0); umass_transfer_done(sc, 0, STATUS_TIMEOUT); return; } if (sc->sc_dying) { umass_transfer_done(sc, sc->transfer_datalen, STATUS_WIRE_FAILED); return; } switch (sc->transfer_state) { /***** Bulk Transfer *****/ case TSTATE_BBB_COMMAND: /* Command transport phase, error handling */ if (err) { DPRINTFM(UDMASS_BBB, "sc %#jx failed to send CBW", (uintptr_t)sc, 0, 0, 0); /* If the device detects that the CBW is invalid, then * the device may STALL both bulk endpoints and require * a Bulk-Reset */ umass_bbb_reset(sc, STATUS_WIRE_FAILED); return; } /* Data transport phase, setup transfer */ sc->transfer_state = TSTATE_BBB_DATA; if (sc->transfer_dir == DIR_IN) { if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKIN], sc->datain_buffer, sc->transfer_datalen, USBD_SHORT_XFER_OK, sc->transfer_xfer[XFER_BBB_DATAIN])) umass_bbb_reset(sc, STATUS_WIRE_FAILED); return; } else if (sc->transfer_dir == DIR_OUT) { memcpy(sc->dataout_buffer, sc->transfer_data, sc->transfer_datalen); if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKOUT], sc->dataout_buffer, sc->transfer_datalen, 0,/* fixed length transfer */ sc->transfer_xfer[XFER_BBB_DATAOUT])) umass_bbb_reset(sc, STATUS_WIRE_FAILED); return; } else { DPRINTFM(UDMASS_BBB, "sc %#jx: no data phase", (uintptr_t)sc, 0, 0, 0); } /* if no data phase, err == 0 */ /* FALLTHROUGH */ case TSTATE_BBB_DATA: /* Command transport phase error handling (ignored if no data * phase (fallthrough from previous state)) */ if (sc->transfer_dir != DIR_NONE) { /* retrieve the length of the transfer that was done */ usbd_get_xfer_status(xfer, NULL, NULL, &sc->transfer_actlen, NULL); DPRINTFM(UDMASS_BBB, "sc %#jx: BBB_DATA actlen=%jd", (uintptr_t)sc, sc->transfer_actlen, 0, 0); if (err) { DPRINTFM(UDMASS_BBB, "sc %#jx Data dir %jd " "err %jd failed, err %jd", (uintptr_t)sc, sc->transfer_dir, sc->transfer_datalen, err); if (err == USBD_STALLED) { sc->transfer_state = TSTATE_BBB_DCLEAR; umass_clear_endpoint_stall(sc, (sc->transfer_dir == DIR_IN? UMASS_BULKIN:UMASS_BULKOUT), sc->transfer_xfer[XFER_BBB_DCLEAR]); } else { /* Unless the error is a pipe stall the * error is fatal. */ umass_bbb_reset(sc,STATUS_WIRE_FAILED); } return; } } /* err == 0 (no data phase or successful) */ /* FALLTHROUGH */ case TSTATE_BBB_DCLEAR: /* stall clear after data phase */ if (sc->transfer_dir == DIR_IN) memcpy(sc->transfer_data, sc->datain_buffer, sc->transfer_actlen); DIF(UDMASS_BBB, if (sc->transfer_dir == DIR_IN) umass_dump_buffer(sc, sc->transfer_data, sc->transfer_datalen, 48)); /* err == 0 (no data phase or successful) */ /* FALLTHROUGH */ case TSTATE_BBB_SCLEAR: /* stall clear after status phase */ /* Reading of CSW after bulk stall condition in data phase * (TSTATE_BBB_DATA2) or bulk-in stall condition after * reading CSW (TSTATE_BBB_SCLEAR). * In the case of no data phase or successful data phase, * err == 0 and the following if block is passed. */ if (err) { /* should not occur */ printf("%s: BBB bulk-%s stall clear failed, %s\n", device_xname(sc->sc_dev), (sc->transfer_dir == DIR_IN? "in":"out"), usbd_errstr(err)); umass_bbb_reset(sc, STATUS_WIRE_FAILED); return; } /* Status transport phase, setup transfer */ if (sc->transfer_state == TSTATE_BBB_COMMAND || sc->transfer_state == TSTATE_BBB_DATA || sc->transfer_state == TSTATE_BBB_DCLEAR) { /* After no data phase, successful data phase and * after clearing bulk-in/-out stall condition */ sc->transfer_state = TSTATE_BBB_STATUS1; next_xfer = sc->transfer_xfer[XFER_BBB_CSW1]; } else { /* After first attempt of fetching CSW */ sc->transfer_state = TSTATE_BBB_STATUS2; next_xfer = sc->transfer_xfer[XFER_BBB_CSW2]; } /* Read the Command Status Wrapper via bulk-in endpoint. */ if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKIN], &sc->csw, UMASS_BBB_CSW_SIZE, 0, next_xfer)) { umass_bbb_reset(sc, STATUS_WIRE_FAILED); return; } return; case TSTATE_BBB_STATUS1: /* first attempt */ case TSTATE_BBB_STATUS2: /* second attempt */ /* Status transfer, error handling */ if (err) { DPRINTFM(UDMASS_BBB, "sc %#jx Failed to read CSW " "err %jd (state %jd)", (uintptr_t)sc, err, sc->transfer_state, 0); /* If this was the first attempt at fetching the CSW * retry it, otherwise fail. */ if (sc->transfer_state == TSTATE_BBB_STATUS1) { sc->transfer_state = TSTATE_BBB_SCLEAR; umass_clear_endpoint_stall(sc, UMASS_BULKIN, sc->transfer_xfer[XFER_BBB_SCLEAR]); return; } else { umass_bbb_reset(sc, STATUS_WIRE_FAILED); return; } } DIF(UDMASS_BBB, umass_bbb_dump_csw(sc, &sc->csw)); #ifdef UMASS_DEBUG residue = UGETDW(sc->csw.dCSWDataResidue); if (residue != sc->transfer_datalen - sc->transfer_actlen) printf("%s: dCSWDataResidue=%d req=%d act=%d\n", device_xname(sc->sc_dev), residue, sc->transfer_datalen, sc->transfer_actlen); #endif residue = sc->transfer_datalen - sc->transfer_actlen; /* Translate weird command-status signatures. */ if ((sc->sc_quirks & UMASS_QUIRK_WRONG_CSWSIG) && UGETDW(sc->csw.dCSWSignature) == CSWSIGNATURE_OLYMPUS_C1) USETDW(sc->csw.dCSWSignature, CSWSIGNATURE); /* Translate invalid command-status tags */ if (sc->sc_quirks & UMASS_QUIRK_WRONG_CSWTAG) USETDW(sc->csw.dCSWTag, UGETDW(sc->cbw.dCBWTag)); /* Check CSW and handle any error */ if (UGETDW(sc->csw.dCSWSignature) != CSWSIGNATURE) { /* Invalid CSW: Wrong signature or wrong tag might * indicate that the device is confused -> reset it. */ printf("%s: Invalid CSW: sig 0x%08x should be 0x%08x\n", device_xname(sc->sc_dev), UGETDW(sc->csw.dCSWSignature), CSWSIGNATURE); umass_bbb_reset(sc, STATUS_WIRE_FAILED); return; } else if (UGETDW(sc->csw.dCSWTag) != UGETDW(sc->cbw.dCBWTag)) { printf("%s: Invalid CSW: tag %d should be %d\n", device_xname(sc->sc_dev), UGETDW(sc->csw.dCSWTag), UGETDW(sc->cbw.dCBWTag)); umass_bbb_reset(sc, STATUS_WIRE_FAILED); return; /* CSW is valid here */ } else if (sc->csw.bCSWStatus > CSWSTATUS_PHASE) { printf("%s: Invalid CSW: status %d > %d\n", device_xname(sc->sc_dev), sc->csw.bCSWStatus, CSWSTATUS_PHASE); umass_bbb_reset(sc, STATUS_WIRE_FAILED); return; } else if (sc->csw.bCSWStatus == CSWSTATUS_PHASE) { printf("%s: Phase Error, residue = %d\n", device_xname(sc->sc_dev), residue); umass_bbb_reset(sc, STATUS_WIRE_FAILED); return; } else if (sc->transfer_actlen > sc->transfer_datalen) { /* Buffer overrun! Don't let this go by unnoticed */ panic("%s: transferred %s %d bytes instead of %d bytes", device_xname(sc->sc_dev), sc->transfer_dir == DIR_IN ? "IN" : "OUT", sc->transfer_actlen, sc->transfer_datalen); #if 0 } else if (sc->transfer_datalen - sc->transfer_actlen != residue) { DPRINTFM(UDMASS_BBB, "sc %#jx: actlen=%jd != " "residue=%jd\n", (uintptr_t)sc, sc->transfer_datalen - sc->transfer_actlen, residue, 0); umass_bbb_reset(sc, STATUS_WIRE_FAILED); return; #endif } else if (sc->csw.bCSWStatus == CSWSTATUS_FAILED) { DPRINTFM(UDMASS_BBB, "sc %#jx: Command Failed, " "res = %jd", (uintptr_t)sc, residue, 0, 0); /* SCSI command failed but transfer was successful */ umass_transfer_done(sc, residue, STATUS_CMD_FAILED); return; } else { /* success */ umass_transfer_done(sc, residue, STATUS_CMD_OK); return; } /***** Bulk Reset *****/ case TSTATE_BBB_RESET1: if (err) printf("%s: BBB reset failed, %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); sc->transfer_state = TSTATE_BBB_RESET2; umass_clear_endpoint_stall(sc, UMASS_BULKIN, sc->transfer_xfer[XFER_BBB_RESET2]); return; case TSTATE_BBB_RESET2: if (err) /* should not occur */ printf("%s: BBB bulk-in clear stall failed, %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); /* no error recovery, otherwise we end up in a loop */ sc->transfer_state = TSTATE_BBB_RESET3; umass_clear_endpoint_stall(sc, UMASS_BULKOUT, sc->transfer_xfer[XFER_BBB_RESET3]); return; case TSTATE_BBB_RESET3: if (err) /* should not occur */ printf("%s: BBB bulk-out clear stall failed, %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); /* no error recovery, otherwise we end up in a loop */ umass_transfer_reset(sc); return; /***** Default *****/ default: panic("%s: Unknown state %d", device_xname(sc->sc_dev), sc->transfer_state); } } /* * Command/Bulk/Interrupt (CBI) specific functions */ Static int umass_cbi_adsc(struct umass_softc *sc, char *buffer, int buflen, int flags, struct usbd_xfer *xfer) { KASSERTMSG(sc->sc_wire & (UMASS_WPROTO_CBI|UMASS_WPROTO_CBI_I), "sc->sc_wire == 0x%02x wrong for umass_cbi_adsc\n", sc->sc_wire); if ((sc->sc_cmd == UMASS_CPROTO_RBC) && (sc->sc_quirks & UMASS_QUIRK_RBC_PAD_TO_12) != 0 && buflen < 12) { (void)memset(buffer + buflen, 0, 12 - buflen); buflen = 12; } sc->sc_req.bmRequestType = UT_WRITE_CLASS_INTERFACE; sc->sc_req.bRequest = UR_CBI_ADSC; USETW(sc->sc_req.wValue, 0); USETW(sc->sc_req.wIndex, sc->sc_ifaceno); USETW(sc->sc_req.wLength, buflen); return umass_setup_ctrl_transfer(sc, &sc->sc_req, buffer, buflen, flags, xfer); } Static void umass_cbi_reset(struct umass_softc *sc, int status) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); SDT_PROBE2(usb, umass, bbb, reset, sc, status); int i; # define SEND_DIAGNOSTIC_CMDLEN 12 KASSERTMSG(sc->sc_wire & (UMASS_WPROTO_CBI|UMASS_WPROTO_CBI_I), "sc->sc_wire == 0x%02x wrong for umass_cbi_reset\n", sc->sc_wire); if (sc->sc_dying) { umass_transfer_done(sc, sc->transfer_datalen, status); return; } /* * Command Block Reset Protocol * * First send a reset request to the device. Then clear * any possibly stalled bulk endpoints. * This is done in 3 steps, states: * TSTATE_CBI_RESET1 * TSTATE_CBI_RESET2 * TSTATE_CBI_RESET3 * * If the reset doesn't succeed, the device should be port reset. */ DPRINTFM(UDMASS_CBI, "sc %#jx: CBI Reset", (uintptr_t)sc, 0, 0, 0); /* CTASSERT */ KASSERTMSG(sizeof(sc->cbl) >= SEND_DIAGNOSTIC_CMDLEN, "%s: CBL struct is too small (%zu < %u)\n", device_xname(sc->sc_dev), sizeof(sc->cbl), SEND_DIAGNOSTIC_CMDLEN); sc->transfer_state = TSTATE_CBI_RESET1; sc->transfer_status = status; /* The 0x1d code is the SEND DIAGNOSTIC command. To distingiush between * the two the last 10 bytes of the cbl is filled with 0xff (section * 2.2 of the CBI spec). */ sc->cbl[0] = 0x1d; /* Command Block Reset */ sc->cbl[1] = 0x04; for (i = 2; i < SEND_DIAGNOSTIC_CMDLEN; i++) sc->cbl[i] = 0xff; if (umass_cbi_adsc(sc, sc->cbl, SEND_DIAGNOSTIC_CMDLEN, 0, sc->transfer_xfer[XFER_CBI_RESET1])) umass_transfer_done(sc, sc->transfer_datalen, status); /* XXX if the command fails we should reset the port on the bub */ } Static void umass_cbi_transfer(struct umass_softc *sc, int lun, void *cmd, int cmdlen, void *data, int datalen, int dir, u_int timeout, int flags, umass_callback cb, void *priv) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); SDT_PROBE7(usb, umass, transfer, start__cbi, sc, cb, priv, data, datalen, dir, timeout); DPRINTFM(UDMASS_CBI, "sc %#jx: cmd=0x%02jx, len=%jd", (uintptr_t)sc, *(u_char *)cmd, datalen, 0); KASSERT(cb); KASSERTMSG(sc->sc_wire & (UMASS_WPROTO_CBI|UMASS_WPROTO_CBI_I), "sc->sc_wire == 0x%02x wrong for umass_cbi_transfer\n", sc->sc_wire); if (sc->sc_dying) { SDT_PROBE7(usb, umass, transfer, done, sc, cb, priv, data, datalen, datalen, STATUS_WIRE_FAILED); cb(sc, priv, datalen, STATUS_WIRE_FAILED); return; } /* Be a little generous. */ sc->timeout = timeout + USBD_DEFAULT_TIMEOUT; /* * Do a CBI transfer with cmdlen bytes from cmd, possibly * a data phase of datalen bytes from/to the device and finally a * csw read phase. * If the data direction was inbound a maximum of datalen bytes * is stored in the buffer pointed to by data. * * umass_cbi_transfer initialises the transfer and lets the state * machine in umass_cbi_state handle the completion. It uses the * following states: * TSTATE_CBI_COMMAND * -> XXX fill in * * An error in any of those states will invoke * umass_cbi_reset. */ /* check the given arguments */ KASSERTMSG(datalen == 0 || data != NULL, "%s: datalen > 0, but no buffer",device_xname(sc->sc_dev)); KASSERTMSG(datalen == 0 || dir != DIR_NONE, "%s: direction is NONE while datalen is not zero\n", device_xname(sc->sc_dev)); /* store the details for the data transfer phase */ sc->transfer_dir = dir; sc->transfer_data = data; sc->transfer_datalen = datalen; sc->transfer_actlen = 0; sc->transfer_cb = cb; sc->transfer_priv = priv; sc->transfer_status = STATUS_CMD_OK; /* move from idle to the command state */ sc->transfer_state = TSTATE_CBI_COMMAND; /* Send the Command Block from host to device via control endpoint. */ if (umass_cbi_adsc(sc, cmd, cmdlen, flags, sc->transfer_xfer[XFER_CBI_CB])) umass_cbi_reset(sc, STATUS_WIRE_FAILED); } Static void umass_cbi_state(struct usbd_xfer *xfer, void *priv, usbd_status err) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); struct umass_softc *sc = (struct umass_softc *) priv; SDT_PROBE3(usb, umass, bbb, state, sc, xfer, err); KASSERTMSG(sc->sc_wire & (UMASS_WPROTO_CBI|UMASS_WPROTO_CBI_I), "sc->sc_wire == 0x%02x wrong for umass_cbi_state\n", sc->sc_wire); if (err == USBD_CANCELLED) { DPRINTFM(UDMASS_BBB, "sc %#jx xfer %#jx cancelled", (uintptr_t)sc, (uintptr_t)xfer, 0, 0); umass_transfer_done(sc, 0, STATUS_TIMEOUT); return; } if (sc->sc_dying) { umass_transfer_done(sc, sc->transfer_datalen, STATUS_WIRE_FAILED); return; } /* * State handling for CBI transfers. */ DPRINTFM(UDMASS_CBI, "sc %#jx: Handling CBI state %jd, xfer=%#jx, ...", (uintptr_t)sc, sc->transfer_state, (uintptr_t)xfer, 0); DPRINTFM(UDMASS_CBI, "... err %jd", err, 0, 0, 0); switch (sc->transfer_state) { /***** CBI Transfer *****/ case TSTATE_CBI_COMMAND: if (err == USBD_STALLED) { DPRINTFM(UDMASS_CBI, "sc %#jx: Command Transport " "failed", (uintptr_t)sc, 0, 0, 0); /* Status transport by control pipe (section 2.3.2.1). * The command contained in the command block failed. * * The control pipe has already been unstalled by the * USB stack. * Section 2.4.3.1.1 states that the bulk in endpoints * should not stalled at this point. */ umass_transfer_done(sc, sc->transfer_datalen, STATUS_CMD_FAILED); return; } else if (err) { DPRINTFM(UDMASS_CBI, "sc %#jx: failed to send ADSC", (uintptr_t)sc, 0, 0, 0); umass_cbi_reset(sc, STATUS_WIRE_FAILED); return; } /* Data transport phase, setup transfer */ sc->transfer_state = TSTATE_CBI_DATA; if (sc->transfer_dir == DIR_IN) { if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKIN], sc->datain_buffer, sc->transfer_datalen, USBD_SHORT_XFER_OK, sc->transfer_xfer[XFER_CBI_DATAIN])) umass_cbi_reset(sc, STATUS_WIRE_FAILED); return; } else if (sc->transfer_dir == DIR_OUT) { memcpy(sc->dataout_buffer, sc->transfer_data, sc->transfer_datalen); if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_BULKOUT], sc->dataout_buffer, sc->transfer_datalen, 0, /* fixed length transfer */ sc->transfer_xfer[XFER_CBI_DATAOUT])) umass_cbi_reset(sc, STATUS_WIRE_FAILED); return; } else { DPRINTFM(UDMASS_CBI, "sc %#jx: no data phase", (uintptr_t)sc, 0, 0, 0); } /* if no data phase, err == 0 */ /* FALLTHROUGH */ case TSTATE_CBI_DATA: /* Command transport phase error handling (ignored if no data * phase (fallthrough from previous state)) */ if (sc->transfer_dir != DIR_NONE) { /* retrieve the length of the transfer that was done */ usbd_get_xfer_status(xfer, NULL, NULL, &sc->transfer_actlen, NULL); DPRINTFM(UDMASS_CBI, "sc %#jx: CBI_DATA actlen=%jd", (uintptr_t)sc, sc->transfer_actlen, 0, 0); if (err) { DPRINTFM(UDMASS_CBI, "sc %#jx: Data dir %jd " "err %jd failed", (uintptr_t)sc, sc->transfer_dir, sc->transfer_datalen, err); if (err == USBD_STALLED) { sc->transfer_state = TSTATE_CBI_DCLEAR; umass_clear_endpoint_stall(sc, (sc->transfer_dir == DIR_IN? UMASS_BULKIN:UMASS_BULKOUT), sc->transfer_xfer[XFER_CBI_DCLEAR]); } else { /* Unless the error is a pipe stall the * error is fatal. */ umass_cbi_reset(sc, STATUS_WIRE_FAILED); } return; } } if (sc->transfer_dir == DIR_IN) memcpy(sc->transfer_data, sc->datain_buffer, sc->transfer_actlen); DIF(UDMASS_CBI, if (sc->transfer_dir == DIR_IN) umass_dump_buffer(sc, sc->transfer_data, sc->transfer_actlen, 48)); /* Status phase */ if (sc->sc_wire == UMASS_WPROTO_CBI_I) { sc->transfer_state = TSTATE_CBI_STATUS; memset(&sc->sbl, 0, sizeof(sc->sbl)); if (umass_setup_transfer(sc, sc->sc_pipe[UMASS_INTRIN], &sc->sbl, sizeof(sc->sbl), 0, /* fixed length transfer */ sc->transfer_xfer[XFER_CBI_STATUS])) umass_cbi_reset(sc, STATUS_WIRE_FAILED); } else { /* No command completion interrupt. Request * sense to get status of command. */ umass_transfer_done(sc, sc->transfer_datalen - sc->transfer_actlen, STATUS_CMD_UNKNOWN); } return; case TSTATE_CBI_STATUS: if (err) { DPRINTFM(UDMASS_CBI, "sc %#jx: Status Transport failed", (uintptr_t)sc, 0, 0, 0); /* Status transport by interrupt pipe (section 2.3.2.2). */ if (err == USBD_STALLED) { sc->transfer_state = TSTATE_CBI_SCLEAR; umass_clear_endpoint_stall(sc, UMASS_INTRIN, sc->transfer_xfer[XFER_CBI_SCLEAR]); } else { umass_cbi_reset(sc, STATUS_WIRE_FAILED); } return; } /* Dissect the information in the buffer */ { uint32_t actlen; usbd_get_xfer_status(xfer,NULL,NULL,&actlen,NULL); DPRINTFM(UDMASS_CBI, "sc %#jx: CBI_STATUS actlen=%jd", (uintptr_t)sc, actlen, 0, 0); if (actlen != 2) break; } if (sc->sc_cmd == UMASS_CPROTO_UFI) { int status; /* Section 3.4.3.1.3 specifies that the UFI command * protocol returns an ASC and ASCQ in the interrupt * data block. */ DPRINTFM(UDMASS_CBI, "sc %#jx: UFI CCI, ASC = 0x%02jx, " "ASCQ = 0x%02jx", (uintptr_t)sc, sc->sbl.ufi.asc, sc->sbl.ufi.ascq, 0); if ((sc->sbl.ufi.asc == 0 && sc->sbl.ufi.ascq == 0) || sc->sc_sense) status = STATUS_CMD_OK; else status = STATUS_CMD_FAILED; /* No autosense, command successful */ umass_transfer_done(sc, sc->transfer_datalen - sc->transfer_actlen, status); } else { int status; /* Command Interrupt Data Block */ DPRINTFM(UDMASS_CBI, "sc %#jx: type=0x%02jx, " "value=0x%02jx", (uintptr_t)sc, sc->sbl.common.type, sc->sbl.common.value, 0); if (sc->sbl.common.type == IDB_TYPE_CCI) { switch (sc->sbl.common.value & IDB_VALUE_STATUS_MASK) { case IDB_VALUE_PASS: status = STATUS_CMD_OK; break; case IDB_VALUE_FAIL: case IDB_VALUE_PERSISTENT: status = STATUS_CMD_FAILED; break; case IDB_VALUE_PHASE: default: /* XXX: gcc */ status = STATUS_WIRE_FAILED; break; } umass_transfer_done(sc, sc->transfer_datalen - sc->transfer_actlen, status); } else { /* XXX What to do? */ umass_transfer_done(sc, sc->transfer_datalen, STATUS_WIRE_FAILED); } } return; case TSTATE_CBI_DCLEAR: if (err) { /* should not occur */ printf("%s: CBI bulk-%s stall clear failed, %s\n", device_xname(sc->sc_dev), (sc->transfer_dir == DIR_IN? "in":"out"), usbd_errstr(err)); umass_cbi_reset(sc, STATUS_WIRE_FAILED); } else { umass_transfer_done(sc, sc->transfer_datalen, STATUS_CMD_FAILED); } return; case TSTATE_CBI_SCLEAR: if (err) { /* should not occur */ printf("%s: CBI intr-in stall clear failed, %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); umass_cbi_reset(sc, STATUS_WIRE_FAILED); } else { umass_transfer_done(sc, sc->transfer_datalen, STATUS_CMD_FAILED); } return; /***** CBI Reset *****/ case TSTATE_CBI_RESET1: if (err) printf("%s: CBI reset failed, %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); sc->transfer_state = TSTATE_CBI_RESET2; umass_clear_endpoint_stall(sc, UMASS_BULKIN, sc->transfer_xfer[XFER_CBI_RESET2]); return; case TSTATE_CBI_RESET2: if (err) /* should not occur */ printf("%s: CBI bulk-in stall clear failed, %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); /* no error recovery, otherwise we end up in a loop */ sc->transfer_state = TSTATE_CBI_RESET3; umass_clear_endpoint_stall(sc, UMASS_BULKOUT, sc->transfer_xfer[XFER_CBI_RESET3]); return; case TSTATE_CBI_RESET3: if (err) /* should not occur */ printf("%s: CBI bulk-out stall clear failed, %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); /* no error recovery, otherwise we end up in a loop */ umass_transfer_reset(sc); return; /***** Default *****/ default: panic("%s: Unknown state %d", device_xname(sc->sc_dev), sc->transfer_state); } } static usbd_status umass_bbb_get_max_lun(struct umass_softc *sc, uint8_t *maxlun) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); usb_device_request_t req; usbd_status err; *maxlun = 0; /* Default to 0. */ DPRINTFM(UDMASS_BBB, "sc %#jx: Get Max Lun", (uintptr_t)sc, 0, 0, 0); /* The Get Max Lun command is a class-specific request. */ req.bmRequestType = UT_READ_CLASS_INTERFACE; req.bRequest = UR_BBB_GET_MAX_LUN; USETW(req.wValue, 0); USETW(req.wIndex, sc->sc_ifaceno); USETW(req.wLength, 1); err = usbd_do_request_flags(sc->sc_udev, &req, maxlun, USBD_SHORT_XFER_OK, 0, USBD_DEFAULT_TIMEOUT); switch (err) { case USBD_NORMAL_COMPLETION: DPRINTFM(UDMASS_BBB, "sc %#jx: Max Lun %jd", (uintptr_t)sc, *maxlun , 0, 0); break; case USBD_STALLED: /* * Device doesn't support Get Max Lun request. */ err = USBD_NORMAL_COMPLETION; DPRINTFM(UDMASS_BBB, "sc %#jx: Get Max Lun not supported", (uintptr_t)sc, 0, 0, 0); break; case USBD_SHORT_XFER: /* * XXX This must mean Get Max Lun is not supported, too! */ err = USBD_NORMAL_COMPLETION; DPRINTFM(UDMASS_BBB, "sc %#jx: Get Max Lun SHORT_XFER", (uintptr_t)sc, 0, 0, 0); break; default: printf("%s: Get Max Lun failed: %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); /* XXX Should we port_reset the device? */ break; } return err; } #ifdef UMASS_DEBUG Static void umass_bbb_dump_cbw(struct umass_softc *sc, umass_bbb_cbw_t *cbw) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); int clen = cbw->bCDBLength; int dlen = UGETDW(cbw->dCBWDataTransferLength); uint8_t *c = cbw->CBWCDB; int tag = UGETDW(cbw->dCBWTag); int flags = cbw->bCBWFlags; DPRINTFM(UDMASS_BBB, "sc %#jx: CBW %jd: cmdlen=%jd", (uintptr_t)sc, tag, clen, 0); DPRINTFM(UDMASS_BBB, " 0x%02jx%02jx%02jx%02jx...", c[0], c[1], c[2], c[3]); DPRINTFM(UDMASS_BBB, " 0x%02jx%02jx%02jx%02jx...", c[4], c[5], c[6], c[7]); DPRINTFM(UDMASS_BBB, " 0x%02jx%02jx...", c[8], c[9], 0, 0); DPRINTFM(UDMASS_BBB, " data = %jd bytes, flags = %jx", dlen, flags, 0, 0); } Static void umass_bbb_dump_csw(struct umass_softc *sc, umass_bbb_csw_t *csw) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); int sig = UGETDW(csw->dCSWSignature); int tag = UGETDW(csw->dCSWTag); int res = UGETDW(csw->dCSWDataResidue); int status = csw->bCSWStatus; DPRINTFM(UDMASS_BBB, "sc %#jx: CSW %jd: sig = 0x%08jx, tag = %jd", (uintptr_t)sc, (uintptr_t)csw, sig, tag); DPRINTFM(UDMASS_BBB, " res = %jd, status = 0x%02jx", res, status, 0, 0); } Static void umass_dump_buffer(struct umass_softc *sc, uint8_t *buffer, int buflen, int printlen) { UMASSHIST_FUNC(); UMASSHIST_CALLED(); int i; DPRINTFM(UDMASS_GEN, "sc %#jx: buffer %#jx", (uintptr_t)sc, (uintptr_t)buffer, 0, 0); for (i = 0; i < buflen && i < printlen;) { if (i + 3 < buflen && i + 3 < printlen) { DPRINTFM(UDMASS_GEN, " 0x%02jx%02jx%02jx%02jx", buffer[i], buffer[i + 1], buffer[i + 2], buffer[i + 3]); i += 4; } else if (i + 2 < buflen && i + 2 < printlen) { DPRINTFM(UDMASS_GEN, " 0x%02jx%02jx%02jx", buffer[i], buffer[i + 1], buffer[i + 2], 0); i += 3; } else if (i + 1 < buflen && i + 2 < printlen) { DPRINTFM(UDMASS_GEN, " 0x%02jx%02jx", buffer[i], buffer[i + 1], 0, 0); i += 2; } else { DPRINTFM(UDMASS_GEN, " 0x%02jx", buffer[i], 0, 0, 0); i += 1; } } } #endif