XCOMM platform: $Xorg: bsdi.cf,v 1.3 2000/08/17 19:41:47 cpqbld Exp $ XCOMM platform: $XFree86: xc/config/cf/bsdi.cf,v 3.37 2003/04/24 22:14:53 herrb Exp $ #ifndef OSName #define OSName DefaultOSName #endif #ifndef OSVendor #define OSVendor BSDI #endif #ifndef OSMajorVersion #define OSMajorVersion DefaultOSMajorVersion #endif #ifndef OSMinorVersion #define OSMinorVersion DefaultOSMinorVersion #endif #ifndef OSTeenyVersion #define OSTeenyVersion DefaultOSTeenyVersion #endif XCOMM operating system: OSName (OSMajorVersion./**/OSMinorVersion./**/OSTeenyVersion) #define HasBSD44Sockets YES #define HasBsdMake YES #define HasDlopen YES #define HasPutenv YES #define HasSnprintf YES #define HasMkstemp YES #define HasUsableFileMmap YES #define HasZlib YES #define HasSetUserContext YES #define HasBSDAuth YES #define HasSetProcTitle YES #define HasBasename NO #if 0 #define HasKrb5 YES #define Krb5Include -I/usr/include/krb5 #define Krb5Libraries -lkrb5 -lk5crypto -lprofile -lcom_err #endif #define SharedGLUReqs $(LDPRELIB) $(XLIB) $(GLXLIB) -lstdc++ #if (OSMajorVersion == 4 && OSMinorVersion >= 1) || (OSMajorVersion > 4) #define HasNCurses YES #else #define HasNCurses NO #endif #if (OSMajorVersion == 4 && OSMinorVersion >= 3) || (OSMajorVersion > 4) #define HasStrlcat YES #else #define HasStrlcat NO #endif #define BuildLBX YES #define GzipFontCompression YES #define BuildXaw6 NO #ifndef UseDeprecatedKeyboardDriver #define UseDeprecatedKeyboardDriver YES #endif XCOMM BSD/OS 5.1 (intel) comes with gcc 3.2.2 installed as gcc and cc. XCOMM BSD/OS 5.0 (intel) comes with gcc 2.95.3 installed as gcc and cc. XCOMM BSD/OS 4.3/4.3.1 (intel) comes with gcc 2.95.3 installed as gcc and cc. XCOMM BSD/OS 4.2 (intel) comes with gcc 2.95.2 installed as gcc and cc. XCOMM BSD/OS 4.2 (sparc) comes with gcc 2.95.2 installed as gcc and cc. XCOMM BSD/OS 4.1 (intel) comes with gcc 2.91.66 installed as gcc and cc. XCOMM BSD/OS 4.1 (sparc) comes with gcc 2.95.2 installed as gcc and cc. XCOMM BSD/OS 4.0.1 (intel) comes with gcc 2.7.2.1 installed as gcc2, gcc and cc. XCOMM BSD/OS 4.0.1 (sparc) comes with gcc 2.7.2.1 installed as gcc2, gcc and cc. XCOMM Punt on OS revs earlier than 4.0.1 XCOMM BSDI uses shlicc for compiling C and shlic++ for compiling C++ XCOMM using static shared libraries. We also build ELF dynamic shared XCOMM libraries as well as normal archive libraries. XCOMM BSD/OS 3.0 comes with gcc 2.7.2 installed as gcc2 and gcc. XCOMM gcc 1.42 is installed as cc. XCOMM BSD/OS 2.1 comes with gcc 2.7.1 installed as gcc2 and gcc. XCOMM gcc 1.42 is installed as cc. XCOMM BSD/OS 2.0 comes with gcc 2.6.3 installed as gcc2 and gcc. XCOMM gcc 1.42 is installed as cc. XCOMM BSD/386 1.1 comes with gcc 2.5.8 installed as gcc2. XCOMM BSD/386 1.0 comes with gcc 1.40 as the only compiler. XCOMM The default is to use gcc2 on release 2.1, 2.0 and 1.1 and gcc1 on 1.0 XCOMM The defaults can be altered by defining "HasGcc2" as YES or NO in XCOMM xf86site.def #ifndef HasGcc # define HasGcc YES #endif #if OSMajorVersion > 1 || OSMinorVersion >= 1 # ifndef HasGcc2 # define HasGcc2 YES # endif #endif #if HasGcc2 # ifndef HasGcc2ForCplusplus # define HasGcc2ForCplusplus YES # endif # ifdef i386Architecture # define CcCmd gcc /* shlicc */ # define CplusplusCmd g++ /* shlicc++ */ # if ((OSMajorVersion == 4 && OSMinorVersion >= 2) || (OSMajorVersion > 4)) # define OptimizedCDebugFlags -O3 -mcpu=pentiumpro -march=pentium # else # define OptimizedCDebugFlags -O2 -m486 # endif # endif # ifdef PpcArchitecture # define CcCmd gcc # define CplusplusCmd g++ # define OptimizedCDebugFlags -O2 # endif # ifdef SparcArchitecture # define CcCmd gcc # define CplusplusCmd g++ # define OptimizedCDebugFlags -O2 -cpu=v8 -mtune=v8 # endif #else # define CcCmd cc # define OptimizedCDebugFlags -O #endif /* * A hack to work around an optimization problem with GCC 2.95.2 - 2.95.4 */ #if ((OSMajorVersion == 4 && OSMinorVersion >= 2) || (OSMajorVersion > 4)) #define GccOptBug295 #endif #define CppCmd /usr/bin/cpp #define HasGroff YES #define MkdirHierCmd mkdir -p #define SetTtyGroup YES #define HasNdbm YES #define DBMLibrary /**/ #define HasWChar32 YES #define DirFailPrefix - #define AvoidNullMakeCommand YES #define HasVarRun YES #define HasVarDb YES # ifndef GccUsesGas # define GccUsesGas YES # endif #if HasGcc #ifndef DefaultCCOptions #if defined(UseInstalled) && (!defined(XF86LinkKit) || !XF86LinkKit) #define DefaultCCOptions /**/ #else #define DefaultCCOptions /* -ansi */ #endif #endif #endif #if GccUsesGas # define GccGasOption -DGCCUSESGAS #else # define GccGasOption /**/ #endif /* * Build a threaded X server on BSD/OS 4.1 and newer releases */ #if (OSMajorVersion == 4 && OSMinorVersion >= 1) || (OSMajorVersion > 4) #define HasPosixThreads YES /* this will autodefine HasThreadedX */ #define HasThreadSafeAPI YES /* * Heck, build a server that can load modules too... */ #define DoLoadableServer Yes #endif XCOMM math.h uses _REENTRANT in FreeBSD, so we define it here too #if (OSMajorVersion >= 5) #define SystemMTDefines -D_REENTRANT -D_THREAD_SAFE -D_POSIX_THREAD_SAFE_FUNCTIONS #elif (OSMajorVersion == 4 && OSMinorVersion >= 1) #define SystemMTDefines -D_REENTRANT -D_THREAD_SAFE #endif #ifdef i386Architecture #ifndef BuildXF86DRI #define BuildXF86DRI NO #endif #endif #ifdef i386Architecture # define HasTk YES # define TkLibName tk4.2 # define TkLibDir /usr/contrib/lib # define TkIncDir /usr/include # define XF86SetupUsesStaticTk NO # define HasTcl YES # define TclLibName tcl7.6 # define TclLibDir /usr/contrib/lib # define TclIncDir /usr/include # define XF86SetupUsesStaticTcl NO # define SharedLibXv YES # define SharedLibXinerama YES # define ServerExtraDefines GccGasOption XFree86ServerDefines -I/sys # define ServerOSDefines XFree86ServerOSDefines -DDDXTIME # define XFree86ConsoleDefines -DBSDI_VT # if OSMajorVersion > 3 || (OSMajorVersion == 3 && OSMinorVersion >= 1) # include # define DontUseLibPathVar # define BuildDynamicLoading YES # define ServerCcCmd cc # define ServerExtraSysLibs DlLibrary # endif # define XConfigDir /etc/X11 #endif #ifdef PpcArchitecture # define BuildServer NO # define BuildFonts NO # define XConfigDir /etc/X11 # include # define DontUseLibPathVar # define BuildDynamicLoading YES # define ServerCcCmd cc # define ServerExtraSysLibs DlLibrary #endif #ifdef SparcArchitecture # define ServerExtraDefines # define ServerOSDefines -DDDXOSINIT #endif #define HasShm YES #define AsmDefines -DUSE_GAS #ifndef LdPreLib #define LdPreLib -L$(BUILDLIBDIR) -L$(USRLIBDIR) #endif #if OSMajorVersion >= 4 #define StandardDefines -D__ELF__ -DCSRG_BASED #else #define StandardDefines -DCSRG_BASED #endif #define InstallCmd /usr/bin/install #define EqnCmd eqn -Tps #define NeqnCmd eqn -Tascii COL = col NEQN = NeqnCmd NROFF = nroff #define DefaultUserPath :/bin:/usr/bin:/usr/local/bin:$(BINDIR) #define DefaultSystemPath /sbin:/usr/sbin:/bin:/usr/bin:$(BINDIR) #define StripInstalledPrograms YES #define InstPgmFlags -s -m 0555 -o bin -g bin #define InstBinFlags -m 0555 -o bin -g bin #define InstUidFlags -m 4555 -o root -g bin #define InstLibFlags -m 0444 -o bin -g bin #define InstIncFlags -m 0444 -o bin -g bin #define InstManFlags -m 0444 -o bin -g bin #define InstDatFlags -m 0444 -o bin -g bin XCOMM Man pages need to be formatted when installed, so override the default XCOMM imake rules. #define ManSuffix 1 #define ManSourcePath $(MANPATH)/cat #define InstallManPageLong(file,destdir,dest) @@\ CppManTarget(file, $(EXTRAMANDEFS)) @@\ @@\ all:: file.0 @@\ @@\ file.0:: file.$(MANNEWSUFFIX) @@\ @if [ -f file.$(MANNEWSUFFIX) ]; \ @@\ then \ @@\ cat file.$(MANNEWSUFFIX) | $(NEQN) | $(TBL) | $(NROFF) $(MANMACROS) | $(COL) >/tmp/$$$$.man; \ @@\ cp /tmp/$$$$.man file.0; \ @@\ $(RM) /tmp/$$$$.man; \ @@\ fi @@\ @@\ install.man:: @@\ MakeDir($(DESTDIR)destdir) @@\ -@if [ -f file.0 ]; \ @@\ then \ @@\ $(INSTALL) -c $(INSTMANFLAGS) file.0 $(DESTDIR)destdir/dest.0; \@@\ fi #define InstallGenManPageLong(file,destdir,dest,suffix) @@\ InstallManPageLong(file,destdir,dest) #define InstallMultipleManSuffix(list,dest,suff) @@\ install.man:: @@\ MakeDir($(DESTDIR)dest) @@\ case '${MFLAGS}' in *[i]*) set +e;; esac; \ @@\ for i in list; do \ @@\ (set -x; \ @@\ cat $$i.suff | $(NEQN) | $(TBL) | $(NROFF) $(MANMACROS) | $(COL) >/tmp/$$$$.suff; \ @@\ $(INSTALL) -c $(INSTMANFLAGS) /tmp/$$$$.suff $(DESTDIR)dest/$$i.0; \ @@\ $(RM) /tmp/$$$$.suff); \ @@\ done #define InstallMultipleMan(list,dest) @@\ InstallMultipleManSuffix(list,dest,man) #define InstallManPageAliases(file,destdir,aliases) @@\ install.man:: @@\ @case '${MFLAGS}' in *[i]*) set +e;; esac; \ @@\ for i in aliases; do \ @@\ (set -x; \ @@\ $(RM) $(DESTDIR)destdir/$$i.0;\ @@\ (cd $(DESTDIR)destdir; $(LN) file.0 $$i.0);\ @@\ ); \ @@\ done #define InstallGenManPageAliases(file,destdir,suffix,aliases) @@\ InstallManPageAliases(file,destdir,aliases) /* * These seem redundant, but leave them in for now. */ #ifdef i386Architecture #define i386Bsd 1 #define i386Bsdi 1 #include #endif #ifdef SparcArchitecture #ifndef XsunMonoServer #define XsunMonoServer NO /* monochrome only */ #endif #ifndef XsunServer #define XsunServer YES /* mono + 8 bit color */ #endif #ifndef Xsun24Server #define Xsun24Server NO /* mono + 8 bit color + 24 bit color */ #endif #ifndef NeedConstPrototypes #define NeedConstPrototypes YES #endif #ifndef NeedNestedPrototypes #define NeedNestedPrototypes YES #endif #ifndef NeedVarargsPrototypes #define NeedVarargsPrototypes YES #endif #ifndef BuildXKB #define BuildXKB YES #endif #endif /* SparcArchitecture */