-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE SCHEMA IF NOT EXISTS _timescaledb_catalog;
CREATE SCHEMA IF NOT EXISTS _timescaledb_internal;
CREATE SCHEMA IF NOT EXISTS _timescaledb_cache;
CREATE SCHEMA IF NOT EXISTS _timescaledb_config;
CREATE SCHEMA IF NOT EXISTS timescaledb_experimental;
GRANT USAGE ON SCHEMA _timescaledb_cache, _timescaledb_catalog, _timescaledb_internal, _timescaledb_config TO PUBLIC;
GRANT USAGE ON SCHEMA timescaledb_experimental TO PUBLIC;

-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

--
-- The general compressed_data type;
--
CREATE TYPE _timescaledb_internal.compressed_data;

--
-- Remote transaction ID
--
CREATE TYPE rxid;

--placeholder to allow creation of functions below
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.


-- Functions have to be run in 2 places:
-- 1) In pre-install between types.pre.sql and types.post.sql to set up the types.
-- 2) On every update to make sure the function points to the correct versioned.so


-- PostgreSQL composite types do not support constraint checks. That is why any table having a ts_interval column must use the following
-- function for constraint validation.
-- This function needs to be defined before executing pre_install/tables.sql because it is used as
-- validation constraint for columns of type ts_interval.

--the textual input/output is simply base64 encoding of the binary representation
CREATE OR REPLACE FUNCTION _timescaledb_internal.compressed_data_in(CSTRING)
   RETURNS _timescaledb_internal.compressed_data
   AS '$libdir/timescaledb-2.4.1', 'ts_compressed_data_in'
   LANGUAGE C IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.compressed_data_out(_timescaledb_internal.compressed_data)
   RETURNS CSTRING
   AS '$libdir/timescaledb-2.4.1', 'ts_compressed_data_out'
   LANGUAGE C IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.compressed_data_send(_timescaledb_internal.compressed_data)
   RETURNS BYTEA
   AS '$libdir/timescaledb-2.4.1', 'ts_compressed_data_send'
   LANGUAGE C IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.compressed_data_recv(internal)
   RETURNS _timescaledb_internal.compressed_data
   AS '$libdir/timescaledb-2.4.1', 'ts_compressed_data_recv'
   LANGUAGE C IMMUTABLE STRICT;

-- Remote transation ID implementation
CREATE OR REPLACE FUNCTION _timescaledb_internal.rxid_in(cstring) RETURNS rxid
    AS '$libdir/timescaledb-2.4.1', 'ts_remote_txn_id_in' LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.rxid_out(rxid) RETURNS cstring
    AS '$libdir/timescaledb-2.4.1', 'ts_remote_txn_id_out' LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

--
-- The general compressed_data type;
--
CREATE TYPE _timescaledb_internal.compressed_data (
  INTERNALLENGTH = VARIABLE,
  STORAGE = EXTERNAL,
  ALIGNMENT = double, --needed for alignment in ARRAY type compression
  INPUT = _timescaledb_internal.compressed_data_in,
  OUTPUT = _timescaledb_internal.compressed_data_out,
  RECEIVE = _timescaledb_internal.compressed_data_recv,
  SEND = _timescaledb_internal.compressed_data_send
);

--
-- Remote transaction ID
--
CREATE TYPE rxid (
  internallength = 16,
  input = _timescaledb_internal.rxid_in,
  output = _timescaledb_internal.rxid_out
);
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

--NOTICE: UPGRADE-SCRIPT-NEEDED contents in this file are not auto-upgraded.
-- This file contains table definitions for various abstractions and data
-- structures for representing hypertables and lower-level concepts.
-- Hypertable
-- ==========
--
-- The hypertable is an abstraction that represents a table that is
-- partitioned in N dimensions, where each dimension maps to a column
-- in the table. A dimension can either be 'open' or 'closed', which
-- reflects the scheme that divides the dimension's keyspace into
-- "slices".
--
-- Conceptually, a partition -- called a "chunk", is a hypercube in
-- the N-dimensional space. A chunk stores a subset of the
-- hypertable's tuples on disk in its own distinct table. The slices
-- that span the chunk's hypercube each correspond to a constraint on
-- the chunk's table, enabling constraint exclusion during queries on
-- the hypertable's data.
--
--
-- Open dimensions
------------------
-- An open dimension does on-demand slicing, creating a new slice
-- based on a configurable interval whenever a tuple falls outside the
-- existing slices. Open dimensions fit well with columns that are
-- incrementally increasing, such as time-based ones.
--
-- Closed dimensions
--------------------
-- A closed dimension completely divides its keyspace into a
-- configurable number of slices. The number of slices can be
-- reconfigured, but the new partitioning only affects newly created
-- chunks.
-- The unique constraint is table_name +schema_name. The ordering is
-- important as we want index access when we filter by table_name
CREATE SEQUENCE IF NOT EXISTS _timescaledb_catalog.hypertable_id_seq MINVALUE 1;

CREATE TABLE IF NOT EXISTS _timescaledb_catalog.hypertable (
  id INTEGER PRIMARY KEY DEFAULT nextval('_timescaledb_catalog.hypertable_id_seq'), 
  schema_name name NOT NULL CHECK (schema_name != '_timescaledb_catalog'),
  table_name name NOT NULL,
  associated_schema_name name NOT NULL,
  associated_table_prefix name NOT NULL,
  num_dimensions smallint NOT NULL,
  chunk_sizing_func_schema name NOT NULL,
  chunk_sizing_func_name name NOT NULL,
  chunk_target_size bigint NOT NULL CHECK (chunk_target_size >= 0), -- size in bytes
  compression_state smallint NOT NULL DEFAULT 0,
  compressed_hypertable_id integer REFERENCES _timescaledb_catalog.hypertable (id),
  replication_factor smallint NULL,
  UNIQUE (associated_schema_name, associated_table_prefix),
  CONSTRAINT hypertable_table_name_schema_name_key UNIQUE (table_name, schema_name),
  -- internal compressed hypertables have compression state = 2
  CONSTRAINT hypertable_dim_compress_check CHECK (num_dimensions > 0 OR compression_state = 2),
  CONSTRAINT hypertable_compress_check CHECK ( (compression_state = 0 OR compression_state = 1 )  OR (compression_state = 2 AND compressed_hypertable_id IS NULL)),
  -- replication_factor NULL: regular hypertable
  -- replication_factor > 0: distributed hypertable on access node
  -- replication_factor -1: distributed hypertable on data node, which is part of a larger table
  CONSTRAINT hypertable_replication_factor_check CHECK (replication_factor > 0 OR replication_factor = -1)
);
ALTER SEQUENCE _timescaledb_catalog.hypertable_id_seq OWNED BY _timescaledb_catalog.hypertable.id;
SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.hypertable_id_seq', '');

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.hypertable', '');

CREATE TABLE IF NOT EXISTS _timescaledb_catalog.hypertable_data_node (
  hypertable_id integer NOT NULL REFERENCES _timescaledb_catalog.hypertable (id),
  node_hypertable_id integer NULL,
  node_name name NOT NULL,
  block_chunks boolean NOT NULL,
  UNIQUE (node_hypertable_id, node_name),
  UNIQUE (hypertable_id, node_name)
);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.hypertable_data_node', '');

-- The tablespace table maps tablespaces to hypertables.
-- This allows spreading a hypertable's chunks across multiple disks.
CREATE TABLE IF NOT EXISTS _timescaledb_catalog.tablespace (
  id serial PRIMARY KEY,
  hypertable_id int NOT NULL REFERENCES _timescaledb_catalog.hypertable (id) ON DELETE CASCADE,
  tablespace_name name NOT NULL,
  UNIQUE (hypertable_id, tablespace_name)
);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.tablespace', '');

-- A dimension represents an axis along which data is partitioned.
CREATE TABLE IF NOT EXISTS _timescaledb_catalog.dimension (
  id serial NOT NULL PRIMARY KEY,
  hypertable_id integer NOT NULL REFERENCES _timescaledb_catalog.hypertable (id) ON DELETE CASCADE,
  column_name name NOT NULL,
  column_type REGTYPE NOT NULL,
  aligned boolean NOT NULL,
  -- closed dimensions
  num_slices smallint NULL,
  partitioning_func_schema name NULL,
  partitioning_func name NULL,
  -- open dimensions (e.g., time)
  interval_length bigint NULL CHECK (interval_length IS NULL OR interval_length > 0),
  integer_now_func_schema name NULL,
  integer_now_func name NULL,
  CHECK ((partitioning_func_schema IS NULL AND partitioning_func IS NULL) OR (partitioning_func_schema IS NOT NULL AND partitioning_func IS NOT NULL)),
  CHECK ((num_slices IS NULL AND interval_length IS NOT NULL) OR (num_slices IS NOT NULL AND interval_length IS NULL)),
  CHECK ((integer_now_func_schema IS NULL AND integer_now_func IS NULL) OR (integer_now_func_schema IS NOT NULL AND integer_now_func IS NOT NULL)),
  UNIQUE (hypertable_id, column_name)
);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.dimension', '');

SELECT pg_catalog.pg_extension_config_dump(pg_get_serial_sequence('_timescaledb_catalog.dimension', 'id'), '');

-- A dimension slice defines a keyspace range along a dimension axis.
CREATE TABLE IF NOT EXISTS _timescaledb_catalog.dimension_slice (
  id serial NOT NULL PRIMARY KEY,
  dimension_id integer NOT NULL REFERENCES _timescaledb_catalog.dimension (id) ON DELETE CASCADE,
  range_start bigint NOT NULL,
  range_end bigint NOT NULL,
  CHECK (range_start <= range_end),
  UNIQUE (dimension_id, range_start, range_end)
);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.dimension_slice', '');

SELECT pg_catalog.pg_extension_config_dump(pg_get_serial_sequence('_timescaledb_catalog.dimension_slice', 'id'), '');

-- A chunk is a partition (hypercube) in an N-dimensional
-- hyperspace. Each chunk is associated with N constraints that define
-- the chunk's hypercube. Tuples that fall within the chunk's
-- hypercube are stored in the chunk's data table, as given by
-- 'schema_name' and 'table_name'.
CREATE SEQUENCE IF NOT EXISTS _timescaledb_catalog.chunk_id_seq MINVALUE 1;

CREATE TABLE IF NOT EXISTS _timescaledb_catalog.chunk (
  id integer PRIMARY KEY DEFAULT nextval('_timescaledb_catalog.chunk_id_seq'),
  hypertable_id int NOT NULL REFERENCES _timescaledb_catalog.hypertable (id),
  schema_name name NOT NULL,
  table_name name NOT NULL,
  compressed_chunk_id integer REFERENCES _timescaledb_catalog.chunk (id),
  dropped boolean NOT NULL DEFAULT FALSE,
  status integer NOT NULL DEFAULT 0,
  UNIQUE (schema_name, table_name)
);
ALTER SEQUENCE _timescaledb_catalog.chunk_id_seq OWNED BY _timescaledb_catalog.chunk.id;

CREATE INDEX IF NOT EXISTS chunk_hypertable_id_idx ON _timescaledb_catalog.chunk (hypertable_id);

CREATE INDEX IF NOT EXISTS chunk_compressed_chunk_id_idx ON _timescaledb_catalog.chunk (compressed_chunk_id);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.chunk', '');
SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.chunk_id_seq', '');

-- A chunk constraint maps a dimension slice to a chunk. Each
-- constraint associated with a chunk will also be a table constraint
-- on the chunk's data table.
CREATE TABLE IF NOT EXISTS _timescaledb_catalog.chunk_constraint (
  chunk_id integer NOT NULL REFERENCES _timescaledb_catalog.chunk (id),
  dimension_slice_id integer NULL REFERENCES _timescaledb_catalog.dimension_slice (id),
  constraint_name name NOT NULL,
  hypertable_constraint_name name NULL,
  UNIQUE (chunk_id, constraint_name)
);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.chunk_constraint', '');

CREATE INDEX IF NOT EXISTS chunk_constraint_chunk_id_dimension_slice_id_idx ON _timescaledb_catalog.chunk_constraint (chunk_id, dimension_slice_id);

CREATE SEQUENCE IF NOT EXISTS _timescaledb_catalog.chunk_constraint_name;

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.chunk_constraint_name', '');

CREATE TABLE IF NOT EXISTS _timescaledb_catalog.chunk_index (
  chunk_id integer NOT NULL REFERENCES _timescaledb_catalog.chunk (id) ON DELETE CASCADE,
  index_name name NOT NULL,
  hypertable_id integer NOT NULL REFERENCES _timescaledb_catalog.hypertable (id) ON DELETE CASCADE,
  hypertable_index_name name NOT NULL,
  UNIQUE (chunk_id, index_name)
);

CREATE INDEX IF NOT EXISTS chunk_index_hypertable_id_hypertable_index_name_idx ON _timescaledb_catalog.chunk_index (hypertable_id, hypertable_index_name);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.chunk_index', '');

CREATE TABLE IF NOT EXISTS _timescaledb_catalog.chunk_data_node (
  chunk_id integer NOT NULL REFERENCES _timescaledb_catalog.chunk (id),
  node_chunk_id integer NOT NULL,
  node_name name NOT NULL,
  UNIQUE (node_chunk_id, node_name),
  UNIQUE (chunk_id, node_name)
);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.chunk_data_node', '');

-- Default jobs are given the id space [1,1000). User-installed jobs and any jobs created inside tests
-- are given the id space [1000, INT_MAX). That way, we do not pg_dump jobs that are always default-installed
-- inside other .sql scripts. This avoids insertion conflicts during pg_restore.
CREATE SEQUENCE IF NOT EXISTS _timescaledb_config.bgw_job_id_seq
MINVALUE 1000;

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_config.bgw_job_id_seq', '');

CREATE TABLE IF NOT EXISTS _timescaledb_config.bgw_job (
  id integer PRIMARY KEY DEFAULT nextval('_timescaledb_config.bgw_job_id_seq'),
  application_name name NOT NULL,
  schedule_interval interval NOT NULL,
  max_runtime interval NOT NULL,
  max_retries integer NOT NULL,
  retry_period interval NOT NULL,
  proc_schema name NOT NULL,
  proc_name name NOT NULL,
  owner name NOT NULL DEFAULT CURRENT_ROLE,
  scheduled bool NOT NULL DEFAULT TRUE,
  hypertable_id integer REFERENCES _timescaledb_catalog.hypertable (id) ON DELETE CASCADE,
  config jsonb
);

ALTER SEQUENCE _timescaledb_config.bgw_job_id_seq OWNED BY _timescaledb_config.bgw_job.id;

CREATE INDEX IF NOT EXISTS bgw_job_proc_hypertable_id_idx ON _timescaledb_config.bgw_job (proc_schema, proc_name, hypertable_id);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_config.bgw_job', 'WHERE id >= 1000');

CREATE TABLE IF NOT EXISTS _timescaledb_internal.bgw_job_stat (
  job_id integer PRIMARY KEY REFERENCES _timescaledb_config.bgw_job (id) ON DELETE CASCADE,
  last_start timestamptz NOT NULL DEFAULT NOW(),
  last_finish timestamptz NOT NULL,
  next_start timestamptz NOT NULL,
  last_successful_finish timestamptz NOT NULL,
  last_run_success bool NOT NULL,
  total_runs bigint NOT NULL,
  total_duration interval NOT NULL,
  total_successes bigint NOT NULL,
  total_failures bigint NOT NULL,
  total_crashes bigint NOT NULL,
  consecutive_failures int NOT NULL,
  consecutive_crashes int NOT NULL
);

--The job_stat table is not dumped by pg_dump on purpose because
--the statistics probably aren't very meaningful across instances.
-- Now we define a special stats table for each job/chunk pair. This will be used by the scheduler
-- to determine whether to run a specific job on a specific chunk.
CREATE TABLE IF NOT EXISTS _timescaledb_internal.bgw_policy_chunk_stats (
  job_id integer NOT NULL REFERENCES _timescaledb_config.bgw_job (id) ON DELETE CASCADE,
  chunk_id integer NOT NULL REFERENCES _timescaledb_catalog.chunk (id) ON DELETE CASCADE,
  num_times_job_run integer,
  last_time_job_run timestamptz,
  UNIQUE (job_id, chunk_id)
);

CREATE TABLE IF NOT EXISTS _timescaledb_catalog.metadata (
  key NAME NOT NULL PRIMARY KEY,
  value text NOT NULL,
  include_in_telemetry boolean NOT NULL
);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.metadata', $$
  WHERE KEY = 'exported_uuid' $$);

CREATE TABLE IF NOT EXISTS _timescaledb_catalog.continuous_agg (
  mat_hypertable_id integer PRIMARY KEY REFERENCES _timescaledb_catalog.hypertable (id) ON DELETE CASCADE,
  raw_hypertable_id integer NOT NULL REFERENCES _timescaledb_catalog.hypertable (id) ON DELETE CASCADE,
  user_view_schema name NOT NULL,
  user_view_name name NOT NULL,
  partial_view_schema name NOT NULL,
  partial_view_name name NOT NULL,
  bucket_width bigint NOT NULL,
  direct_view_schema name NOT NULL,
  direct_view_name name NOT NULL,
  materialized_only bool NOT NULL DEFAULT FALSE,
  UNIQUE (user_view_schema, user_view_name),
  UNIQUE (partial_view_schema, partial_view_name)
);

CREATE INDEX IF NOT EXISTS continuous_agg_raw_hypertable_id_idx ON _timescaledb_catalog.continuous_agg (raw_hypertable_id);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.continuous_agg', '');

CREATE TABLE IF NOT EXISTS _timescaledb_catalog.continuous_aggs_invalidation_threshold (
  hypertable_id integer PRIMARY KEY REFERENCES _timescaledb_catalog.hypertable (id) ON DELETE CASCADE,
  watermark bigint NOT NULL
);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.continuous_aggs_invalidation_threshold', '');

-- this does not have an FK on the materialization table since INSERTs to this
-- table are performance critical
CREATE TABLE IF NOT EXISTS _timescaledb_catalog.continuous_aggs_hypertable_invalidation_log (
  hypertable_id integer NOT NULL,
  lowest_modified_value bigint NOT NULL,
  greatest_modified_value bigint NOT NULL
);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.continuous_aggs_hypertable_invalidation_log', '');

CREATE INDEX continuous_aggs_hypertable_invalidation_log_idx ON _timescaledb_catalog.continuous_aggs_hypertable_invalidation_log (hypertable_id, lowest_modified_value ASC);

-- per cagg copy of invalidation log
CREATE TABLE IF NOT EXISTS _timescaledb_catalog.continuous_aggs_materialization_invalidation_log (
  materialization_id integer REFERENCES _timescaledb_catalog.continuous_agg (mat_hypertable_id) ON DELETE CASCADE,
  lowest_modified_value bigint NOT NULL,
  greatest_modified_value bigint NOT NULL
);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.continuous_aggs_materialization_invalidation_log', '');

CREATE INDEX continuous_aggs_materialization_invalidation_log_idx ON _timescaledb_catalog.continuous_aggs_materialization_invalidation_log (materialization_id, lowest_modified_value ASC);


/* the source of this data is the enum from the source code that lists
 *  the algorithms. This table is NOT dumped.
 */
CREATE TABLE IF NOT EXISTS _timescaledb_catalog.compression_algorithm (
  id smallint PRIMARY KEY,
  version smallint NOT NULL,
  name name NOT NULL,
  description text
);

CREATE TABLE IF NOT EXISTS _timescaledb_catalog.hypertable_compression (
  hypertable_id integer REFERENCES _timescaledb_catalog.hypertable (id) ON DELETE CASCADE,
  attname name NOT NULL,
  compression_algorithm_id smallint REFERENCES _timescaledb_catalog.compression_algorithm (id),
  segmentby_column_index smallint,
  orderby_column_index smallint,
  orderby_asc boolean,
  orderby_nullsfirst boolean,
  PRIMARY KEY (hypertable_id, attname),
  UNIQUE (hypertable_id, segmentby_column_index),
  UNIQUE (hypertable_id, orderby_column_index)
);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.hypertable_compression', '');

CREATE TABLE IF NOT EXISTS _timescaledb_catalog.compression_chunk_size (
  chunk_id integer REFERENCES _timescaledb_catalog.chunk (id) ON DELETE CASCADE,
  compressed_chunk_id integer REFERENCES _timescaledb_catalog.chunk (id) ON DELETE CASCADE,
  uncompressed_heap_size bigint NOT NULL,
  uncompressed_toast_size bigint NOT NULL,
  uncompressed_index_size bigint NOT NULL,
  compressed_heap_size bigint NOT NULL,
  compressed_toast_size bigint NOT NULL,
  compressed_index_size bigint NOT NULL,
  numrows_pre_compression bigint,
  numrows_post_compression bigint,
  PRIMARY KEY (chunk_id, compressed_chunk_id)
);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.compression_chunk_size', '');

--This stores commit decisions for 2pc remote txns. Abort decisions are never stored.
--If a PREPARE TRANSACTION fails for any data node then the entire
--frontend transaction will be rolled back and no rows will be stored.
--the frontend_transaction_id represents the entire distributed transaction
--each datanode will have a unique remote_transaction_id.
CREATE TABLE _timescaledb_catalog.remote_txn (
  data_node_name name, --this is really only to allow us to cleanup stuff on a per-node basis.
  remote_transaction_id text CHECK (remote_transaction_id::rxid IS NOT NULL),
  PRIMARY KEY (remote_transaction_id)
);

CREATE INDEX IF NOT EXISTS remote_txn_data_node_name_idx ON _timescaledb_catalog.remote_txn (data_node_name);

SELECT pg_catalog.pg_extension_config_dump('_timescaledb_catalog.remote_txn', '');

-- This table stores information about the stage that has been completed of a
-- chunk move/copy activity
--
-- A cleanup activity can query and check if the backend is running. If the
-- backend has exited then we can commence cleanup. The cleanup
-- activity can also do a diff with the "time_start" value to ascertain if
-- the entire end-to-end activity is going on for too long
--
-- We also track the end time of every stage. A diff with the current time
-- will give us an idea about how long the current stage has been running
--
-- Entry for a chunk move/copy activity gets deleted on successful completion
--
-- We don't want to pg_dump this table's contents. A node restored using it
-- could be part of a totally different multinode setup and we don't want to
-- carry over chunk copy/move operations from earlier (if it makes sense at all)
--

CREATE SEQUENCE IF NOT EXISTS _timescaledb_catalog.chunk_copy_operation_id_seq MINVALUE 1;

CREATE TABLE IF NOT EXISTS _timescaledb_catalog.chunk_copy_operation (
  operation_id name PRIMARY KEY, -- the publisher/subscriber identifier used
  backend_pid integer NOT NULL, -- the pid of the backend running this activity
  completed_stage name NOT NULL, -- the completed stage/step
  time_start timestamptz NOT NULL DEFAULT NOW(), -- start time of the activity
  chunk_id integer NOT NULL REFERENCES _timescaledb_catalog.chunk (id) ON DELETE CASCADE,
  source_node_name name NOT NULL,
  dest_node_name name NOT NULL,
  delete_on_source_node bool NOT NULL -- is a move or copy activity
);

-- Set table permissions
-- We need to grant SELECT to PUBLIC for all tables even those not
-- marked as being dumped because pg_dump will try to access all
-- tables initially to detect inheritance chains and then decide
-- which objects actually need to be dumped.
GRANT SELECT ON ALL TABLES IN SCHEMA _timescaledb_catalog TO PUBLIC;

GRANT SELECT ON ALL TABLES IN SCHEMA _timescaledb_config TO PUBLIC;

GRANT SELECT ON ALL TABLES IN SCHEMA _timescaledb_internal TO PUBLIC;

GRANT SELECT ON ALL SEQUENCES IN SCHEMA _timescaledb_catalog TO PUBLIC;

GRANT SELECT ON ALL SEQUENCES IN SCHEMA _timescaledb_config TO PUBLIC;

GRANT SELECT ON ALL SEQUENCES IN SCHEMA _timescaledb_internal TO PUBLIC;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

--insert data for compression_algorithm --
insert into _timescaledb_catalog.compression_algorithm( id, version, name, description) values
( 0, 1, 'COMPRESSION_ALGORITHM_NONE', 'no compression'),
( 1, 1, 'COMPRESSION_ALGORITHM_ARRAY', 'array'),
( 2, 1, 'COMPRESSION_ALGORITHM_DICTIONARY', 'dictionary'),
( 3, 1, 'COMPRESSION_ALGORITHM_GORILLA', 'gorilla'),
( 4, 1, 'COMPRESSION_ALGORITHM_DELTADELTA', 'deltadelta');
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE FUNCTION _timescaledb_internal.restart_background_workers()
RETURNS BOOL 
AS '$libdir/timescaledb', 'ts_bgw_db_workers_restart'
LANGUAGE C VOLATILE;

SELECT _timescaledb_internal.restart_background_workers();
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE FUNCTION timescaledb_fdw_handler()
RETURNS fdw_handler
AS '$libdir/timescaledb-2.4.1', 'ts_timescaledb_fdw_handler'
LANGUAGE C STRICT;

CREATE OR REPLACE FUNCTION timescaledb_fdw_validator(text[], oid)
RETURNS void
AS '$libdir/timescaledb-2.4.1', 'ts_timescaledb_fdw_validator'
LANGUAGE C STRICT;

-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE FOREIGN DATA WRAPPER timescaledb_fdw
  HANDLER timescaledb_fdw_handler
  VALIDATOR timescaledb_fdw_validator;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.


-- Functions have to be run in 2 places:
-- 1) In pre-install between types.pre.sql and types.post.sql to set up the types.
-- 2) On every update to make sure the function points to the correct versioned.so


-- PostgreSQL composite types do not support constraint checks. That is why any table having a ts_interval column must use the following
-- function for constraint validation.
-- This function needs to be defined before executing pre_install/tables.sql because it is used as
-- validation constraint for columns of type ts_interval.

--the textual input/output is simply base64 encoding of the binary representation
CREATE OR REPLACE FUNCTION _timescaledb_internal.compressed_data_in(CSTRING)
   RETURNS _timescaledb_internal.compressed_data
   AS '$libdir/timescaledb-2.4.1', 'ts_compressed_data_in'
   LANGUAGE C IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.compressed_data_out(_timescaledb_internal.compressed_data)
   RETURNS CSTRING
   AS '$libdir/timescaledb-2.4.1', 'ts_compressed_data_out'
   LANGUAGE C IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.compressed_data_send(_timescaledb_internal.compressed_data)
   RETURNS BYTEA
   AS '$libdir/timescaledb-2.4.1', 'ts_compressed_data_send'
   LANGUAGE C IMMUTABLE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.compressed_data_recv(internal)
   RETURNS _timescaledb_internal.compressed_data
   AS '$libdir/timescaledb-2.4.1', 'ts_compressed_data_recv'
   LANGUAGE C IMMUTABLE STRICT;

-- Remote transation ID implementation
CREATE OR REPLACE FUNCTION _timescaledb_internal.rxid_in(cstring) RETURNS rxid
    AS '$libdir/timescaledb-2.4.1', 'ts_remote_txn_id_in' LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.rxid_out(rxid) RETURNS cstring
    AS '$libdir/timescaledb-2.4.1', 'ts_remote_txn_id_out' LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE FUNCTION timescaledb_fdw_handler()
RETURNS fdw_handler
AS '$libdir/timescaledb-2.4.1', 'ts_timescaledb_fdw_handler'
LANGUAGE C STRICT;

CREATE OR REPLACE FUNCTION timescaledb_fdw_validator(text[], oid)
RETURNS void
AS '$libdir/timescaledb-2.4.1', 'ts_timescaledb_fdw_validator'
LANGUAGE C STRICT;

-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- Trigger that blocks INSERTs on the hypertable's root table
CREATE OR REPLACE FUNCTION _timescaledb_internal.insert_blocker() RETURNS trigger
AS '$libdir/timescaledb-2.4.1', 'ts_hypertable_insert_blocker' LANGUAGE C;

-- Records mutations or INSERTs which would invalidate a continuous aggregate
CREATE OR REPLACE FUNCTION _timescaledb_internal.continuous_agg_invalidation_trigger() RETURNS TRIGGER
AS '$libdir/timescaledb-2.4.1', 'ts_continuous_agg_invalidation_trigger' LANGUAGE C;

CREATE OR REPLACE FUNCTION set_integer_now_func(hypertable REGCLASS, integer_now_func REGPROC, replace_if_exists BOOL = false) RETURNS VOID
AS '$libdir/timescaledb-2.4.1', 'ts_hypertable_set_integer_now_func'
LANGUAGE C VOLATILE STRICT;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- Built-in function for calculating the next chunk interval when
-- using adaptive chunking. The function can be replaced by a
-- user-defined function with the same signature.
--
-- The parameters passed to the function are as follows:
--
-- dimension_id: the ID of the dimension to calculate the interval for
-- dimension_coord: the coordinate / point on the dimensional axis
-- where the tuple that triggered this chunk creation falls.
-- chunk_target_size: the target size in bytes that the chunk should have.
--
-- The function should return the new interval in dimension-specific
-- time (ususally microseconds).
CREATE OR REPLACE FUNCTION _timescaledb_internal.calculate_chunk_interval(
        dimension_id INTEGER,
        dimension_coord BIGINT,
        chunk_target_size BIGINT
) RETURNS BIGINT AS '$libdir/timescaledb-2.4.1', 'ts_calculate_chunk_interval' LANGUAGE C;

-- Function for explicit chunk exclusion. Supply a record and an array
-- of chunk ids as input.
-- Intended to be used in WHERE clause.
-- An example: SELECT * FROM hypertable WHERE _timescaledb_internal.chunks_in(hypertable, ARRAY[1,2]);
--
-- Use it with care as this function directly affects what chunks are being scanned for data.
-- This is a marker function and should never be executed (we remove it from the plan)
CREATE OR REPLACE FUNCTION _timescaledb_internal.chunks_in(record RECORD, chunks INTEGER[]) RETURNS BOOL
AS '$libdir/timescaledb-2.4.1', 'ts_chunks_in' LANGUAGE C STABLE STRICT PARALLEL SAFE;

--given a chunk's relid, return the id. Error out if not a chunk relid.
CREATE OR REPLACE FUNCTION _timescaledb_internal.chunk_id_from_relid(relid OID) RETURNS INTEGER
AS '$libdir/timescaledb-2.4.1', 'ts_chunk_id_from_relid' LANGUAGE C STABLE STRICT PARALLEL SAFE;

-- Show the definition of a chunk.
CREATE OR REPLACE FUNCTION _timescaledb_internal.show_chunk(chunk REGCLASS)
RETURNS TABLE(chunk_id INTEGER, hypertable_id INTEGER, schema_name NAME, table_name NAME, relkind "char", slices JSONB)
AS '$libdir/timescaledb-2.4.1', 'ts_chunk_show' LANGUAGE C VOLATILE;

-- Create a chunk with the given dimensional constraints (slices) as
-- given in the JSONB. If chunk_table is a valid relation, it will be
-- attached to the hypertable and used as the data table for the new
-- chunk. Note that schema_name and table_name need not be the same as
-- the existing schema and name for chunk_table. The provided chunk
-- table will be renamed and/or moved as necessary.
CREATE OR REPLACE FUNCTION _timescaledb_internal.create_chunk(
       hypertable REGCLASS,
       slices JSONB,	   
       schema_name NAME = NULL,
       table_name NAME = NULL,
	   chunk_table REGCLASS = NULL)
RETURNS TABLE(chunk_id INTEGER, hypertable_id INTEGER, schema_name NAME, table_name NAME, relkind "char", slices JSONB, created BOOLEAN)
AS '$libdir/timescaledb-2.4.1', 'ts_chunk_create' LANGUAGE C VOLATILE;

-- change default data node for a chunk
CREATE OR REPLACE FUNCTION _timescaledb_internal.set_chunk_default_data_node(chunk REGCLASS, node_name NAME) RETURNS BOOLEAN
AS '$libdir/timescaledb-2.4.1', 'ts_chunk_set_default_data_node' LANGUAGE C VOLATILE;

-- Get chunk stats.
CREATE OR REPLACE FUNCTION _timescaledb_internal.get_chunk_relstats(relid REGCLASS)
RETURNS TABLE(chunk_id INTEGER, hypertable_id INTEGER, num_pages INTEGER, num_tuples REAL, num_allvisible INTEGER)
AS '$libdir/timescaledb-2.4.1', 'ts_chunk_get_relstats' LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.get_chunk_colstats(relid REGCLASS)
RETURNS TABLE(chunk_id INTEGER, hypertable_id INTEGER, att_num INTEGER, nullfrac REAL, width INTEGER, distinctval REAL, slotkind INTEGER[], slotopstrings CSTRING[], slotcollations OID[],
slot1numbers FLOAT4[], slot2numbers FLOAT4[], slot3numbers FLOAT4[], slot4numbers FLOAT4[], slot5numbers FLOAT4[],
slotvaluetypetrings CSTRING[], slot1values CSTRING[], slot2values CSTRING[], slot3values CSTRING[], slot4values CSTRING[], slot5values CSTRING[])
AS '$libdir/timescaledb-2.4.1', 'ts_chunk_get_colstats' LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.create_chunk_table(
       hypertable REGCLASS,
       slices JSONB,
       schema_name NAME,
       table_name NAME)
RETURNS BOOL AS '$libdir/timescaledb-2.4.1', 'ts_chunk_create_empty_table' LANGUAGE C VOLATILE;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- Check if a data node is up
CREATE OR REPLACE FUNCTION _timescaledb_internal.ping_data_node(node_name NAME) RETURNS BOOLEAN
AS '$libdir/timescaledb-2.4.1', 'ts_data_node_ping' LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.remote_txn_heal_data_node(foreign_server_oid oid)
RETURNS INT
AS '$libdir/timescaledb-2.4.1', 'ts_remote_txn_heal_data_node'
LANGUAGE C STRICT;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

--documentation of these function located in chunk_index.h
CREATE OR REPLACE FUNCTION _timescaledb_internal.chunk_index_clone(chunk_index_oid OID) RETURNS OID
AS '$libdir/timescaledb-2.4.1', 'ts_chunk_index_clone' LANGUAGE C VOLATILE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.chunk_index_replace(chunk_index_oid_old OID, chunk_index_oid_new OID) RETURNS VOID
AS '$libdir/timescaledb-2.4.1', 'ts_chunk_index_replace' LANGUAGE C VOLATILE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.create_chunk_replica_table(
    chunk REGCLASS,
    data_node_name NAME
) RETURNS VOID AS '$libdir/timescaledb-2.4.1', 'ts_chunk_create_replica_table' LANGUAGE C VOLATILE;

-- Drop the specified chunk replica on the specified data node
CREATE OR REPLACE FUNCTION  _timescaledb_internal.chunk_drop_replica(
    chunk                   REGCLASS,
    node_name               NAME
) RETURNS VOID
AS '$libdir/timescaledb-2.4.1', 'ts_chunk_drop_replica' LANGUAGE C VOLATILE;

CREATE OR REPLACE PROCEDURE _timescaledb_internal.wait_subscription_sync(
    schema_name    NAME,
    table_name     NAME,
    retry_count    INT DEFAULT 18000,
    retry_delay_ms NUMERIC DEFAULT 0.200
)
LANGUAGE PLPGSQL AS
$BODY$
DECLARE
    in_sync BOOLEAN;
BEGIN
    FOR i in 1 .. retry_count
    LOOP
        SELECT pgs.srsubstate = 'r'
        INTO in_sync
        FROM pg_subscription_rel pgs
        JOIN pg_class pgc ON relname = table_name
        JOIN pg_namespace n ON (n.OID = pgc.relnamespace)
        WHERE pgs.srrelid = pgc.oid AND schema_name = n.nspname;

        if (in_sync IS NULL OR NOT in_sync) THEN
          PERFORM pg_sleep(retry_delay_ms);
        ELSE
          RETURN;
        END IF;
    END LOOP;
    RAISE 'subscription sync wait timedout';
END
$BODY$;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

------------------------------------------------------------------------
-- Experimental DDL functions and APIs.
-- 
-- Users should not rely on these functions unless they accept that
-- they can change and/or be removed at any time.
------------------------------------------------------------------------

-- Block new chunk creation on a data node for a distributed
-- hypertable. NULL hypertable means it will block chunks for all
-- distributed hypertables
CREATE OR REPLACE FUNCTION timescaledb_experimental.block_new_chunks(data_node_name NAME, hypertable REGCLASS = NULL, force BOOLEAN = FALSE) RETURNS INTEGER
AS '$libdir/timescaledb-2.4.1', 'ts_data_node_block_new_chunks' LANGUAGE C VOLATILE;

-- Allow chunk creation on a blocked data node for a distributed
-- hypertable. NULL hypertable means it will allow chunks for all
-- distributed hypertables
CREATE OR REPLACE FUNCTION timescaledb_experimental.allow_new_chunks(data_node_name NAME, hypertable REGCLASS = NULL) RETURNS INTEGER
AS '$libdir/timescaledb-2.4.1', 'ts_data_node_allow_new_chunks' LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION timescaledb_experimental.refresh_continuous_aggregate(
    continuous_aggregate     REGCLASS,
    hypertable_chunk         REGCLASS
) RETURNS VOID AS '$libdir/timescaledb-2.4.1', 'ts_continuous_agg_refresh_chunk' LANGUAGE C VOLATILE;

CREATE OR REPLACE PROCEDURE timescaledb_experimental.move_chunk(
    chunk REGCLASS,
    source_node NAME = NULL,
    destination_node NAME = NULL)
AS '$libdir/timescaledb-2.4.1', 'ts_move_chunk_proc' LANGUAGE C;

CREATE OR REPLACE PROCEDURE timescaledb_experimental.copy_chunk(
    chunk REGCLASS,
    source_node NAME = NULL,
    destination_node NAME = NULL)
AS '$libdir/timescaledb-2.4.1', 'ts_copy_chunk_proc' LANGUAGE C;

-- A copy_chunk or move_chunk procedure call involves multiple nodes and
-- depending on the data size can take a long time. Failures are possible
-- when this long running activity is ongoing. We need to be able to recover
-- and cleanup such failed chunk copy/move activities and it's done via this
-- procedure
CREATE OR REPLACE PROCEDURE timescaledb_experimental.cleanup_copy_chunk_operation(
    operation_id NAME)
AS '$libdir/timescaledb-2.4.1', 'ts_copy_chunk_cleanup_proc' LANGUAGE C;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- This file contains utilities for time conversion.
CREATE OR REPLACE FUNCTION _timescaledb_internal.to_unix_microseconds(ts TIMESTAMPTZ) RETURNS BIGINT
    AS '$libdir/timescaledb-2.4.1', 'ts_pg_timestamp_to_unix_microseconds' LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.to_timestamp(unixtime_us BIGINT) RETURNS TIMESTAMPTZ
    AS '$libdir/timescaledb-2.4.1', 'ts_pg_unix_microseconds_to_timestamp' LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.to_timestamp_without_timezone(unixtime_us BIGINT)
  RETURNS TIMESTAMP
  AS '$libdir/timescaledb-2.4.1', 'ts_pg_unix_microseconds_to_timestamp'
  LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.to_date(unixtime_us BIGINT)
  RETURNS DATE
  AS '$libdir/timescaledb-2.4.1', 'ts_pg_unix_microseconds_to_date'
  LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.to_interval(unixtime_us BIGINT) RETURNS INTERVAL
    AS '$libdir/timescaledb-2.4.1', 'ts_pg_unix_microseconds_to_interval' LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

-- Time can be represented in a hypertable as an int* (bigint/integer/smallint) or as a timestamp type (
-- with or without timezones). In metatables and other internal systems all time values are stored as bigint.
-- Converting from int* columns to internal representation is a cast to bigint.
-- Converting from timestamps to internal representation is conversion to epoch (in microseconds).

-- Gets the sql code for representing the literal for the given time value (in the internal representation) as the column_type.
CREATE OR REPLACE FUNCTION _timescaledb_internal.time_literal_sql(
    time_value      BIGINT,
    column_type     REGTYPE
)
    RETURNS text LANGUAGE PLPGSQL STABLE AS
$BODY$
DECLARE
    ret text;
BEGIN
    IF time_value IS NULL THEN
        RETURN format('%L', NULL);
    END IF;
    CASE column_type
      WHEN 'BIGINT'::regtype, 'INTEGER'::regtype, 'SMALLINT'::regtype THEN
        RETURN format('%L', time_value); -- scale determined by user.
      WHEN 'TIMESTAMP'::regtype THEN
        --the time_value for timestamps w/o tz does not depend on local timezones. So perform at UTC.
        RETURN format('TIMESTAMP %1$L', timezone('UTC',_timescaledb_internal.to_timestamp(time_value))); -- microseconds
      WHEN 'TIMESTAMPTZ'::regtype THEN
        -- assume time_value is in microsec
        RETURN format('TIMESTAMPTZ %1$L', _timescaledb_internal.to_timestamp(time_value)); -- microseconds
      WHEN 'DATE'::regtype THEN
        RETURN format('%L', timezone('UTC',_timescaledb_internal.to_timestamp(time_value))::date);
      ELSE
         EXECUTE 'SELECT format(''%L'', $1::' || column_type::text || ')' into ret using time_value;
         RETURN ret;
    END CASE;
END
$BODY$;

CREATE OR REPLACE FUNCTION _timescaledb_internal.interval_to_usec(
       chunk_interval INTERVAL
)
RETURNS BIGINT LANGUAGE SQL IMMUTABLE PARALLEL SAFE AS
$BODY$
    SELECT (int_sec * 1000000)::bigint from extract(epoch from chunk_interval) as int_sec;
$BODY$;

CREATE OR REPLACE FUNCTION _timescaledb_internal.time_to_internal(time_val ANYELEMENT)
RETURNS BIGINT AS '$libdir/timescaledb-2.4.1', 'ts_time_to_internal' LANGUAGE C VOLATILE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.cagg_watermark(hypertable_id INTEGER)
RETURNS INT8 AS '$libdir/timescaledb-2.4.1', 'ts_continuous_agg_watermark' LANGUAGE C STABLE STRICT;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- This file contains functions associated with creating new
-- hypertables.

CREATE OR REPLACE FUNCTION _timescaledb_internal.dimension_is_finite(
    val      BIGINT
)
    RETURNS BOOLEAN LANGUAGE SQL IMMUTABLE PARALLEL SAFE AS
$BODY$
    --end values of bigint reserved for infinite
    SELECT val > (-9223372036854775808)::bigint AND val < 9223372036854775807::bigint
$BODY$;


CREATE OR REPLACE FUNCTION _timescaledb_internal.dimension_slice_get_constraint_sql(
    dimension_slice_id  INTEGER
)
    RETURNS TEXT LANGUAGE PLPGSQL VOLATILE AS
$BODY$
DECLARE
    dimension_slice_row _timescaledb_catalog.dimension_slice;
    dimension_row _timescaledb_catalog.dimension;
    dimension_def TEXT;
    dimtype REGTYPE;
    parts TEXT[];
BEGIN
    SELECT * INTO STRICT dimension_slice_row
    FROM _timescaledb_catalog.dimension_slice
    WHERE id = dimension_slice_id;

    SELECT * INTO STRICT dimension_row
    FROM _timescaledb_catalog.dimension
    WHERE id = dimension_slice_row.dimension_id;

    IF dimension_row.partitioning_func_schema IS NOT NULL AND
       dimension_row.partitioning_func IS NOT NULL THEN
        SELECT prorettype INTO STRICT dimtype
        FROM pg_catalog.pg_proc pro
        WHERE pro.oid = format('%I.%I', dimension_row.partitioning_func_schema, dimension_row.partitioning_func)::regproc::oid;

        dimension_def := format('%1$I.%2$I(%3$I)',
             dimension_row.partitioning_func_schema,
             dimension_row.partitioning_func,
             dimension_row.column_name);
    ELSE
        dimension_def := format('%1$I', dimension_row.column_name);
        dimtype := dimension_row.column_type;
    END IF;

    IF dimension_row.num_slices IS NOT NULL THEN

        IF  _timescaledb_internal.dimension_is_finite(dimension_slice_row.range_start) THEN
            parts = parts || format(' %1$s >= %2$L ', dimension_def, dimension_slice_row.range_start);
        END IF;

        IF _timescaledb_internal.dimension_is_finite(dimension_slice_row.range_end) THEN
            parts = parts || format(' %1$s < %2$L ', dimension_def, dimension_slice_row.range_end);
        END IF;

        IF array_length(parts, 1) = 0 THEN
            RETURN NULL;
        END IF;
        return array_to_string(parts, 'AND');
    ELSE
        -- only works with time for now
        IF _timescaledb_internal.time_literal_sql(dimension_slice_row.range_start, dimtype) =
           _timescaledb_internal.time_literal_sql(dimension_slice_row.range_end, dimtype) THEN
            RAISE 'time-based constraints have the same start and end values for column "%": %',
                    dimension_row.column_name,
                    _timescaledb_internal.time_literal_sql(dimension_slice_row.range_end, dimtype);
        END IF;

        parts = ARRAY[]::text[];

        IF _timescaledb_internal.dimension_is_finite(dimension_slice_row.range_start) THEN
            parts = parts || format(' %1$s >= %2$s ',
            dimension_def,
            _timescaledb_internal.time_literal_sql(dimension_slice_row.range_start, dimtype));
        END IF;

        IF _timescaledb_internal.dimension_is_finite(dimension_slice_row.range_end) THEN
            parts = parts || format(' %1$s < %2$s ',
            dimension_def,
            _timescaledb_internal.time_literal_sql(dimension_slice_row.range_end, dimtype));
        END IF;

        return array_to_string(parts, 'AND');
    END IF;
END
$BODY$;

-- Outputs the create_hypertable command to recreate the given hypertable.
--
-- This is currently used internally for our single hypertable backup tool
-- so that it knows how to restore the hypertable without user intervention.
--
-- It only works for hypertables with up to 2 dimensions.
CREATE OR REPLACE FUNCTION _timescaledb_internal.get_create_command(
    table_name NAME
)
    RETURNS TEXT LANGUAGE PLPGSQL VOLATILE AS
$BODY$
DECLARE
    h_id             INTEGER;
    schema_name      NAME;
    time_column      NAME;
    time_interval    BIGINT;
    space_column     NAME;
    space_partitions INTEGER;
    dimension_cnt    INTEGER;
    dimension_row    record;
    ret              TEXT;
BEGIN
    SELECT h.id, h.schema_name
    FROM _timescaledb_catalog.hypertable AS h
    WHERE h.table_name = get_create_command.table_name
    INTO h_id, schema_name;

    IF h_id IS NULL THEN
        RAISE EXCEPTION 'hypertable "%" not found', table_name
        USING ERRCODE = 'TS101';
    END IF;

    SELECT COUNT(*)
    FROM _timescaledb_catalog.dimension d
    WHERE d.hypertable_id = h_id
    INTO STRICT dimension_cnt;

    IF dimension_cnt > 2 THEN
        RAISE EXCEPTION 'get_create_command only supports hypertables with up to 2 dimensions'
        USING ERRCODE = 'TS101';
    END IF;

    FOR dimension_row IN
        SELECT *
        FROM _timescaledb_catalog.dimension d
        WHERE d.hypertable_id = h_id
        LOOP
        IF dimension_row.interval_length IS NOT NULL THEN
            time_column := dimension_row.column_name;
            time_interval := dimension_row.interval_length;
        ELSIF dimension_row.num_slices IS NOT NULL THEN
            space_column := dimension_row.column_name;
            space_partitions := dimension_row.num_slices;
        END IF;
    END LOOP;

    ret := format($$SELECT create_hypertable('%I.%I', '%s'$$, schema_name, table_name, time_column);
    IF space_column IS NOT NULL THEN
        ret := ret || format($$, '%I', %s$$, space_column, space_partitions);
    END IF;
    ret := ret || format($$, chunk_time_interval => %s, create_default_indexes=>FALSE);$$, time_interval);

    RETURN ret;
END
$BODY$;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- create constraint on newly created chunk based on hypertable constraint
CREATE OR REPLACE FUNCTION _timescaledb_internal.chunk_constraint_add_table_constraint(
    chunk_constraint_row  _timescaledb_catalog.chunk_constraint
)
    RETURNS VOID LANGUAGE PLPGSQL AS
$BODY$
DECLARE
    chunk_row _timescaledb_catalog.chunk;
    hypertable_row _timescaledb_catalog.hypertable;
    constraint_oid OID;
    constraint_type CHAR;
    check_sql TEXT;
    def TEXT;
    indx_tablespace NAME;
    tablespace_def TEXT;
BEGIN
    SELECT * INTO STRICT chunk_row FROM _timescaledb_catalog.chunk c WHERE c.id = chunk_constraint_row.chunk_id;
    SELECT * INTO STRICT hypertable_row FROM _timescaledb_catalog.hypertable h WHERE h.id = chunk_row.hypertable_id;

    IF chunk_constraint_row.dimension_slice_id IS NOT NULL THEN
        check_sql = _timescaledb_internal.dimension_slice_get_constraint_sql(chunk_constraint_row.dimension_slice_id);
        IF check_sql IS NOT NULL THEN
            def := format('CHECK (%s)',  check_sql);
        ELSE
            def := NULL;
        END IF;
    ELSIF chunk_constraint_row.hypertable_constraint_name IS NOT NULL THEN

        SELECT oid, contype INTO STRICT constraint_oid, constraint_type FROM pg_constraint
        WHERE conname=chunk_constraint_row.hypertable_constraint_name AND
              conrelid = format('%I.%I', hypertable_row.schema_name, hypertable_row.table_name)::regclass::oid;

        IF constraint_type IN ('p','u') THEN
          -- since primary keys and unique constraints are backed by an index
          -- they might have an index tablespace assigned
          -- the tablspace is not part of the constraint definition so
          -- we have to append it explicitly to preserve it
          SELECT T.spcname INTO indx_tablespace
          FROM pg_constraint C, pg_class I, pg_tablespace T
          WHERE C.oid = constraint_oid AND C.contype IN ('p', 'u') AND I.oid = C.conindid AND I.reltablespace = T.oid;

          def := pg_get_constraintdef(constraint_oid);

          IF indx_tablespace IS NOT NULL THEN
            def := format('%s USING INDEX TABLESPACE %I', def, indx_tablespace);
          END IF;

        ELSIF constraint_type = 't' THEN
          -- constraint triggers are copied separately with normal triggers
          def := NULL;
        ELSE
          def := pg_get_constraintdef(constraint_oid);
        END IF;

    ELSE
        RAISE 'unknown constraint type';
    END IF;

    IF def IS NOT NULL THEN
        EXECUTE format(
            $$ ALTER TABLE %I.%I ADD CONSTRAINT %I %s $$,
            chunk_row.schema_name, chunk_row.table_name, chunk_constraint_row.constraint_name, def
        );
    END IF;
END
$BODY$;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- Clone fk constraint from a hypertable
CREATE OR REPLACE FUNCTION _timescaledb_internal.hypertable_constraint_add_table_fk_constraint(
    user_ht_constraint_name NAME,
    user_ht_schema_name NAME,
    user_ht_table_name NAME,
    compress_ht_id INTEGER
)
    RETURNS VOID LANGUAGE PLPGSQL AS
$BODY$
DECLARE
    compressed_ht_row _timescaledb_catalog.hypertable;
    constraint_oid OID;
    check_sql TEXT;
    def TEXT;
BEGIN
    SELECT * INTO STRICT compressed_ht_row FROM _timescaledb_catalog.hypertable h
    WHERE h.id = compress_ht_id;
    IF user_ht_constraint_name IS NOT NULL THEN
        SELECT oid INTO STRICT constraint_oid FROM pg_constraint
        WHERE conname=user_ht_constraint_name AND contype = 'f' AND
              conrelid = format('%I.%I', user_ht_schema_name, user_ht_table_name)::regclass::oid;
        def := pg_get_constraintdef(constraint_oid);
    ELSE
        RAISE 'unknown constraint type';
    END IF;
    IF def IS NOT NULL THEN
        EXECUTE format(
            $$ ALTER TABLE %I.%I ADD CONSTRAINT %I %s $$,
            compressed_ht_row.schema_name, compressed_ht_row.table_name, user_ht_constraint_name, def
        );
    END IF;

END
$BODY$;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- Deprecated partition hash function
CREATE OR REPLACE FUNCTION _timescaledb_internal.get_partition_for_key(val anyelement)
    RETURNS int
    AS '$libdir/timescaledb-2.4.1', 'ts_get_partition_for_key' LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.get_partition_hash(val anyelement)
    RETURNS int
    AS '$libdir/timescaledb-2.4.1', 'ts_get_partition_hash' LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.get_time_type(hypertable_id INTEGER)
    RETURNS OID
    AS '$libdir/timescaledb-2.4.1', 'ts_hypertable_get_time_type' LANGUAGE C STABLE STRICT;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- This file contains functions related to getting information about the
-- schema of a hypertable, including columns, their types, etc.


-- Check if a given table OID is a main table (i.e. the table a user
-- targets for SQL operations) for a hypertable
CREATE OR REPLACE FUNCTION _timescaledb_internal.is_main_table(
    table_oid regclass
)
    RETURNS bool LANGUAGE SQL STABLE AS
$BODY$
    SELECT EXISTS(SELECT 1 FROM _timescaledb_catalog.hypertable WHERE table_name = relname AND schema_name = nspname)
    FROM pg_class c
    INNER JOIN pg_namespace n ON (n.OID = c.relnamespace)
    WHERE c.OID = table_oid;
$BODY$;

-- Check if given table is a hypertable's main table
CREATE OR REPLACE FUNCTION _timescaledb_internal.is_main_table(
    schema_name NAME,
    table_name  NAME
)
    RETURNS BOOLEAN LANGUAGE SQL STABLE AS
$BODY$
     SELECT EXISTS(
         SELECT 1 FROM _timescaledb_catalog.hypertable h
         WHERE h.schema_name = is_main_table.schema_name AND 
               h.table_name = is_main_table.table_name
     );
$BODY$;

-- Get a hypertable given its main table OID
CREATE OR REPLACE FUNCTION _timescaledb_internal.hypertable_from_main_table(
    table_oid regclass
)
    RETURNS _timescaledb_catalog.hypertable LANGUAGE SQL STABLE AS
$BODY$
    SELECT h.*
    FROM pg_class c
    INNER JOIN pg_namespace n ON (n.OID = c.relnamespace)
    INNER JOIN _timescaledb_catalog.hypertable h ON (h.table_name = c.relname AND h.schema_name = n.nspname)
    WHERE c.OID = table_oid;
$BODY$;

CREATE OR REPLACE FUNCTION _timescaledb_internal.main_table_from_hypertable(
    hypertable_id int
)
    RETURNS regclass LANGUAGE SQL STABLE AS
$BODY$
    SELECT format('%I.%I',h.schema_name, h.table_name)::regclass
    FROM _timescaledb_catalog.hypertable h
    WHERE id = hypertable_id;
$BODY$;


-- Get the name of the time column for a chunk.
--
-- schema_name, table_name - name of the schema and table for the table represented by the crn.
CREATE OR REPLACE FUNCTION _timescaledb_internal.time_col_name_for_chunk(
    schema_name NAME,
    table_name  NAME
)
    RETURNS NAME LANGUAGE PLPGSQL STABLE AS
$BODY$
DECLARE
    time_col_name NAME;
BEGIN
    SELECT h.time_column_name INTO STRICT time_col_name
    FROM _timescaledb_catalog.hypertable h
    INNER JOIN _timescaledb_catalog.chunk c ON (c.hypertable_id = h.id)
    WHERE c.schema_name = time_col_name_for_chunk.schema_name AND
    c.table_name = time_col_name_for_chunk.table_name;
    RETURN time_col_name;
END
$BODY$;

-- Get the type of the time column for a chunk.
--
-- schema_name, table_name - name of the schema and table for the table represented by the crn.
CREATE OR REPLACE FUNCTION _timescaledb_internal.time_col_type_for_chunk(
    schema_name NAME,
    table_name  NAME
)
    RETURNS REGTYPE LANGUAGE PLPGSQL STABLE AS
$BODY$
DECLARE
    time_col_type REGTYPE;
BEGIN
    SELECT h.time_column_type INTO STRICT time_col_type
    FROM _timescaledb_catalog.hypertable h
    INNER JOIN _timescaledb_catalog.chunk c ON (c.hypertable_id = h.id)
    WHERE c.schema_name = time_col_type_for_chunk.schema_name AND
    c.table_name = time_col_type_for_chunk.table_name;
    RETURN time_col_type;
END
$BODY$;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- This file defines DDL functions for adding and manipulating hypertables.

-- Converts a regular postgres table to a hypertable.
--
-- relation - The OID of the table to be converted
-- time_column_name - Name of the column that contains time for a given record
-- partitioning_column - Name of the column to partition data by
-- number_partitions - (Optional) Number of partitions for data
-- associated_schema_name - (Optional) Schema for internal hypertable tables
-- associated_table_prefix - (Optional) Prefix for internal hypertable table names
-- chunk_time_interval - (Optional) Initial time interval for a chunk
-- create_default_indexes - (Optional) Whether or not to create the default indexes
-- if_not_exists - (Optional) Do not fail if table is already a hypertable
-- partitioning_func - (Optional) The partitioning function to use for spatial partitioning
-- migrate_data - (Optional) Set to true to migrate any existing data in the table to chunks
-- chunk_target_size - (Optional) The target size for chunks (e.g., '1000MB', 'estimate', or 'off')
-- chunk_sizing_func - (Optional) A function to calculate the chunk time interval for new chunks
-- time_partitioning_func - (Optional) The partitioning function to use for "time" partitioning
-- replication_factor - (Optional) A value of 1 or greater makes this hypertable distributed
-- data_nodes - (Optional) The specific data nodes to distribute this hypertable across
CREATE OR REPLACE FUNCTION  create_hypertable(
    relation                REGCLASS,
    time_column_name        NAME,
    partitioning_column     NAME = NULL,
    number_partitions       INTEGER = NULL,
    associated_schema_name  NAME = NULL,
    associated_table_prefix NAME = NULL,
    chunk_time_interval     ANYELEMENT = NULL::bigint,
    create_default_indexes  BOOLEAN = TRUE,
    if_not_exists           BOOLEAN = FALSE,
    partitioning_func       REGPROC = NULL,
    migrate_data            BOOLEAN = FALSE,
    chunk_target_size       TEXT = NULL,
    chunk_sizing_func       REGPROC = '_timescaledb_internal.calculate_chunk_interval'::regproc,
    time_partitioning_func  REGPROC = NULL,
    replication_factor      INTEGER = NULL,
    data_nodes              NAME[] = NULL
) RETURNS TABLE(hypertable_id INT, schema_name NAME, table_name NAME, created BOOL) AS '$libdir/timescaledb-2.4.1', 'ts_hypertable_create' LANGUAGE C VOLATILE;

-- Same functionality as create_hypertable, only must have a replication factor > 0 (defaults to 1)
CREATE OR REPLACE FUNCTION  create_distributed_hypertable(
    relation                REGCLASS,
    time_column_name        NAME,
    partitioning_column     NAME = NULL,
    number_partitions       INTEGER = NULL,
    associated_schema_name  NAME = NULL,
    associated_table_prefix NAME = NULL,
    chunk_time_interval     ANYELEMENT = NULL::bigint,
    create_default_indexes  BOOLEAN = TRUE,
    if_not_exists           BOOLEAN = FALSE,
    partitioning_func       REGPROC = NULL,
    migrate_data            BOOLEAN = FALSE,
    chunk_target_size       TEXT = NULL,
    chunk_sizing_func       REGPROC = '_timescaledb_internal.calculate_chunk_interval'::regproc,
    time_partitioning_func  REGPROC = NULL,
    replication_factor      INTEGER = 1,
    data_nodes              NAME[] = NULL
) RETURNS TABLE(hypertable_id INT, schema_name NAME, table_name NAME, created BOOL) AS '$libdir/timescaledb-2.4.1', 'ts_hypertable_distributed_create' LANGUAGE C VOLATILE;

-- Set adaptive chunking. To disable, set chunk_target_size => 'off'.
CREATE OR REPLACE FUNCTION  set_adaptive_chunking(
    hypertable                     REGCLASS,
    chunk_target_size              TEXT,
    INOUT chunk_sizing_func        REGPROC = '_timescaledb_internal.calculate_chunk_interval'::regproc,
    OUT chunk_target_size          BIGINT
) RETURNS RECORD AS '$libdir/timescaledb-2.4.1', 'ts_chunk_adaptive_set' LANGUAGE C VOLATILE;

-- Update chunk_time_interval for a hypertable.
--
-- hypertable - The OID of the table corresponding to a hypertable whose time
--     interval should be updated
-- chunk_time_interval - The new time interval. For hypertables with integral
--     time columns, this must be an integral type. For hypertables with a
--     TIMESTAMP/TIMESTAMPTZ/DATE type, it can be integral which is treated as
--     microseconds, or an INTERVAL type.
CREATE OR REPLACE FUNCTION  set_chunk_time_interval(
    hypertable              REGCLASS,
    chunk_time_interval     ANYELEMENT,
    dimension_name          NAME = NULL
) RETURNS VOID AS '$libdir/timescaledb-2.4.1', 'ts_dimension_set_interval' LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION  set_number_partitions(
    hypertable              REGCLASS,
    number_partitions       INTEGER,
    dimension_name          NAME = NULL
) RETURNS VOID AS '$libdir/timescaledb-2.4.1', 'ts_dimension_set_num_slices' LANGUAGE C VOLATILE;

-- Drop chunks older than the given timestamp for the specific
-- hypertable or continuous aggregate.
CREATE OR REPLACE FUNCTION drop_chunks(
    relation               REGCLASS,
    older_than             "any" = NULL,
    newer_than             "any" = NULL,
    verbose                BOOLEAN = FALSE
) RETURNS SETOF TEXT AS '$libdir/timescaledb-2.4.1', 'ts_chunk_drop_chunks'
LANGUAGE C VOLATILE PARALLEL UNSAFE;

-- show chunks older than or newer than a specific time.
-- `relation` must be a valid hypertable or continuous aggregate.
CREATE OR REPLACE FUNCTION show_chunks(
    relation               REGCLASS,
    older_than             "any" = NULL,
    newer_than             "any" = NULL
) RETURNS SETOF REGCLASS AS '$libdir/timescaledb-2.4.1', 'ts_chunk_show_chunks'
LANGUAGE C STABLE PARALLEL SAFE;

-- Add a dimension (of partitioning) to a hypertable
--
-- hypertable - OID of the table to add a dimension to
-- column_name - NAME of the column to use in partitioning for this dimension
-- number_partitions - Number of partitions, for non-time dimensions
-- interval_length - Size of intervals for time dimensions (can be integral or INTERVAL)
-- partitioning_func - Function used to partition the column
-- if_not_exists - If set, and the dimension already exists, generate a notice instead of an error
CREATE OR REPLACE FUNCTION  add_dimension(
    hypertable              REGCLASS,
    column_name             NAME,
    number_partitions       INTEGER = NULL,
    chunk_time_interval     ANYELEMENT = NULL::BIGINT,
    partitioning_func       REGPROC = NULL,
    if_not_exists           BOOLEAN = FALSE
) RETURNS TABLE(dimension_id INT, schema_name NAME, table_name NAME, column_name NAME, created BOOL)
AS '$libdir/timescaledb-2.4.1', 'ts_dimension_add' LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION attach_tablespace(
    tablespace NAME,
    hypertable REGCLASS,
    if_not_attached BOOLEAN = false
) RETURNS VOID
AS '$libdir/timescaledb-2.4.1', 'ts_tablespace_attach' LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION detach_tablespace(
    tablespace NAME,
    hypertable REGCLASS = NULL,
    if_attached BOOLEAN = false
) RETURNS INTEGER
AS '$libdir/timescaledb-2.4.1', 'ts_tablespace_detach' LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION detach_tablespaces(hypertable REGCLASS) RETURNS INTEGER
AS '$libdir/timescaledb-2.4.1', 'ts_tablespace_detach_all_from_hypertable' LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION show_tablespaces(hypertable REGCLASS) RETURNS SETOF NAME
AS '$libdir/timescaledb-2.4.1', 'ts_tablespace_show' LANGUAGE C VOLATILE STRICT;

-- Add a data node to a TimescaleDB distributed database.
CREATE OR REPLACE FUNCTION add_data_node(
    node_name              NAME,
    host                   TEXT,
    database               NAME = NULL,
    port                   INTEGER = NULL,
    if_not_exists          BOOLEAN = FALSE,
    bootstrap              BOOLEAN = TRUE,
    password               TEXT = NULL
) RETURNS TABLE(node_name NAME, host TEXT, port INTEGER, database NAME,
                node_created BOOL, database_created BOOL, extension_created BOOL)
AS '$libdir/timescaledb-2.4.1', 'ts_data_node_add' LANGUAGE C VOLATILE;

-- Delete a data node from a distributed database
CREATE OR REPLACE FUNCTION delete_data_node(
    node_name              NAME,
    if_exists              BOOLEAN = FALSE,
    force                  BOOLEAN = FALSE,
    repartition            BOOLEAN = TRUE
) RETURNS BOOLEAN AS '$libdir/timescaledb-2.4.1', 'ts_data_node_delete' LANGUAGE C VOLATILE;

-- Attach a data node to a distributed hypertable
CREATE OR REPLACE FUNCTION attach_data_node(
    node_name              NAME,
    hypertable             REGCLASS,
    if_not_attached        BOOLEAN = FALSE,
    repartition            BOOLEAN = TRUE
) RETURNS TABLE(hypertable_id INTEGER, node_hypertable_id INTEGER, node_name NAME)
AS '$libdir/timescaledb-2.4.1', 'ts_data_node_attach' LANGUAGE C VOLATILE;

-- Detach a data node from a distributed hypertable. NULL hypertable means it will detach from all distributed hypertables
CREATE OR REPLACE FUNCTION detach_data_node(
    node_name              NAME,
    hypertable             REGCLASS = NULL,
    if_attached            BOOLEAN = FALSE,
    force                  BOOLEAN = FALSE,
    repartition            BOOLEAN = TRUE
) RETURNS INTEGER
AS '$libdir/timescaledb-2.4.1', 'ts_data_node_detach' LANGUAGE C VOLATILE;

-- Execute query on a specified list of data nodes. By default node_list is NULL, which means
-- to execute the query on every data node
CREATE OR REPLACE PROCEDURE distributed_exec(
       query TEXT,
       node_list name[] = NULL,
       transactional BOOLEAN = TRUE)
AS '$libdir/timescaledb-2.4.1', 'ts_distributed_exec' LANGUAGE C;

-- Execute pg_create_restore_point() on each data node
CREATE OR REPLACE FUNCTION create_distributed_restore_point(
    name                   TEXT
) RETURNS TABLE(node_name NAME, node_type TEXT, restore_point pg_lsn)
AS '$libdir/timescaledb-2.4.1', 'ts_create_distributed_restore_point' LANGUAGE C VOLATILE STRICT;

-- Sets new replication factor for distributed hypertable
CREATE OR REPLACE FUNCTION  set_replication_factor(
    hypertable              REGCLASS,
    replication_factor      INTEGER
) RETURNS VOID
AS '$libdir/timescaledb-2.4.1', 'ts_hypertable_distributed_set_replication_factor' LANGUAGE C VOLATILE;

-- Refresh a continuous aggregate across the given window.
CREATE OR REPLACE PROCEDURE refresh_continuous_aggregate(
    continuous_aggregate     REGCLASS,
    window_start             "any",
    window_end               "any"
) LANGUAGE C AS '$libdir/timescaledb-2.4.1', 'ts_continuous_agg_refresh';
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

DROP EVENT TRIGGER IF EXISTS timescaledb_ddl_command_end;

CREATE OR REPLACE FUNCTION _timescaledb_internal.process_ddl_event() RETURNS event_trigger
AS '$libdir/timescaledb-2.4.1', 'ts_timescaledb_process_ddl_event' LANGUAGE C;

--EVENT TRIGGER MUST exclude the ALTER EXTENSION tag.
CREATE EVENT TRIGGER timescaledb_ddl_command_end ON ddl_command_end
WHEN TAG IN ('ALTER TABLE','CREATE TRIGGER','CREATE TABLE','CREATE INDEX','ALTER INDEX', 'DROP TABLE', 'DROP INDEX', 'DROP SCHEMA')
EXECUTE FUNCTION _timescaledb_internal.process_ddl_event();

DROP EVENT TRIGGER IF EXISTS timescaledb_ddl_sql_drop;
CREATE EVENT TRIGGER timescaledb_ddl_sql_drop ON sql_drop
EXECUTE FUNCTION _timescaledb_internal.process_ddl_event();
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE FUNCTION _timescaledb_internal.first_sfunc(internal, anyelement, "any")
RETURNS internal
AS '$libdir/timescaledb-2.4.1', 'ts_first_sfunc'
LANGUAGE C IMMUTABLE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.first_combinefunc(internal, internal)
RETURNS internal
AS '$libdir/timescaledb-2.4.1', 'ts_first_combinefunc'
LANGUAGE C IMMUTABLE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.last_sfunc(internal, anyelement, "any")
RETURNS internal
AS '$libdir/timescaledb-2.4.1', 'ts_last_sfunc'
LANGUAGE C IMMUTABLE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.last_combinefunc(internal, internal)
RETURNS internal
AS '$libdir/timescaledb-2.4.1', 'ts_last_combinefunc'
LANGUAGE C IMMUTABLE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.bookend_finalfunc(internal, anyelement, "any")
RETURNS anyelement
AS '$libdir/timescaledb-2.4.1', 'ts_bookend_finalfunc'
LANGUAGE C IMMUTABLE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.bookend_serializefunc(internal)
RETURNS bytea
AS '$libdir/timescaledb-2.4.1', 'ts_bookend_serializefunc'
LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.bookend_deserializefunc(bytea, internal)
RETURNS internal
AS '$libdir/timescaledb-2.4.1', 'ts_bookend_deserializefunc'
LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;


-- We started using CREATE OR REPLACE AGGREGATE for aggregate creation once the syntax was fully supported
-- as it is easier to support idempotent changes this way. This will allow for changes to functions supporting
-- the aggregate, and, for instance, the definition and inclusion of inverse functions for window function
-- support. However, it should still be noted that changes to the data structures used for the internal
-- state of the aggregate must be backwards compatible and the old format must be accepted by any new functions
-- in order for them to continue working with Continuous Aggregates, where old states may have been materialized.

--This aggregate returns the "first" value of the first argument when ordered by the second argument.
--Ex. first(temp, time) returns the temp value for the row with the lowest time
CREATE OR REPLACE AGGREGATE first(anyelement, "any") (
    SFUNC = _timescaledb_internal.first_sfunc,
    STYPE = internal,
    COMBINEFUNC = _timescaledb_internal.first_combinefunc,
    SERIALFUNC = _timescaledb_internal.bookend_serializefunc,
    DESERIALFUNC = _timescaledb_internal.bookend_deserializefunc,
    PARALLEL = SAFE,
    FINALFUNC = _timescaledb_internal.bookend_finalfunc,
    FINALFUNC_EXTRA
);

--This aggregate returns the "last" value of the first argument when ordered by the second argument.
--Ex. last(temp, time) returns the temp value for the row with highest time
CREATE OR REPLACE AGGREGATE last(anyelement, "any") (
    SFUNC = _timescaledb_internal.last_sfunc,
    STYPE = internal,
    COMBINEFUNC = _timescaledb_internal.last_combinefunc,
    SERIALFUNC = _timescaledb_internal.bookend_serializefunc,
    DESERIALFUNC = _timescaledb_internal.bookend_deserializefunc,
    PARALLEL = SAFE,
    FINALFUNC = _timescaledb_internal.bookend_finalfunc,
    FINALFUNC_EXTRA
);
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- time_bucket returns the left edge of the bucket where ts falls into.
-- Buckets span an interval of time equal to the bucket_width and are aligned with the epoch.
CREATE OR REPLACE FUNCTION time_bucket(bucket_width INTERVAL, ts TIMESTAMP) RETURNS TIMESTAMP
	AS '$libdir/timescaledb-2.4.1', 'ts_timestamp_bucket' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;

-- bucketing of timestamptz happens at UTC time
CREATE OR REPLACE FUNCTION time_bucket(bucket_width INTERVAL, ts TIMESTAMPTZ) RETURNS TIMESTAMPTZ
	AS '$libdir/timescaledb-2.4.1', 'ts_timestamptz_bucket' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;

--bucketing on date should not do any timezone conversion
CREATE OR REPLACE FUNCTION time_bucket(bucket_width INTERVAL, ts DATE) RETURNS DATE
	AS '$libdir/timescaledb-2.4.1', 'ts_date_bucket' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;

--bucketing with origin
CREATE OR REPLACE FUNCTION time_bucket(bucket_width INTERVAL, ts TIMESTAMP, origin TIMESTAMP) RETURNS TIMESTAMP
	AS '$libdir/timescaledb-2.4.1', 'ts_timestamp_bucket' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;
CREATE OR REPLACE FUNCTION time_bucket(bucket_width INTERVAL, ts TIMESTAMPTZ, origin TIMESTAMPTZ) RETURNS TIMESTAMPTZ
	AS '$libdir/timescaledb-2.4.1', 'ts_timestamptz_bucket' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;
CREATE OR REPLACE FUNCTION time_bucket(bucket_width INTERVAL, ts DATE, origin DATE) RETURNS DATE
	AS '$libdir/timescaledb-2.4.1', 'ts_date_bucket' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;

-- bucketing of int
CREATE OR REPLACE FUNCTION time_bucket(bucket_width SMALLINT, ts SMALLINT) RETURNS SMALLINT
	AS '$libdir/timescaledb-2.4.1', 'ts_int16_bucket' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;
CREATE OR REPLACE FUNCTION time_bucket(bucket_width INT, ts INT) RETURNS INT
	AS '$libdir/timescaledb-2.4.1', 'ts_int32_bucket' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;
CREATE OR REPLACE FUNCTION time_bucket(bucket_width BIGINT, ts BIGINT) RETURNS BIGINT
	AS '$libdir/timescaledb-2.4.1', 'ts_int64_bucket' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;

-- bucketing of int with offset
CREATE OR REPLACE FUNCTION time_bucket(bucket_width SMALLINT, ts SMALLINT, "offset" SMALLINT) RETURNS SMALLINT
	AS '$libdir/timescaledb-2.4.1', 'ts_int16_bucket' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;
CREATE OR REPLACE FUNCTION time_bucket(bucket_width INT, ts INT, "offset" INT) RETURNS INT
	AS '$libdir/timescaledb-2.4.1', 'ts_int32_bucket' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;
CREATE OR REPLACE FUNCTION time_bucket(bucket_width BIGINT, ts BIGINT, "offset" BIGINT) RETURNS BIGINT
	AS '$libdir/timescaledb-2.4.1', 'ts_int64_bucket' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;

-- If an interval is given as the third argument, the bucket alignment is offset by the interval.
CREATE OR REPLACE FUNCTION time_bucket(bucket_width INTERVAL, ts TIMESTAMP, "offset" INTERVAL)
    RETURNS TIMESTAMP LANGUAGE SQL IMMUTABLE PARALLEL SAFE STRICT AS
$BODY$
    SELECT @extschema@.time_bucket(bucket_width, ts-"offset")+"offset";
$BODY$;

CREATE OR REPLACE FUNCTION time_bucket(bucket_width INTERVAL, ts TIMESTAMPTZ, "offset" INTERVAL)
    RETURNS TIMESTAMPTZ LANGUAGE SQL IMMUTABLE PARALLEL SAFE STRICT AS
$BODY$
    SELECT @extschema@.time_bucket(bucket_width, ts-"offset")+"offset";
$BODY$;

CREATE OR REPLACE FUNCTION time_bucket(bucket_width INTERVAL, ts DATE, "offset" INTERVAL)
    RETURNS DATE LANGUAGE SQL IMMUTABLE PARALLEL SAFE STRICT AS
$BODY$
    SELECT (@extschema@.time_bucket(bucket_width, ts-"offset")+"offset")::date;
$BODY$;

-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- time_bucket_ng() is an _experimental_ new version of time_bucket().
--
-- Unlike time_bucket(), time_bucket_ng() supports variable-sized buckets,
-- such as months and years, and also timezones. Note that the behavior
-- and the interface of this function are subjects to change. There could
-- be bugs, and the implementation doesn't claim to be complete. Use at
-- your own risk.
--
-- This function is IMMUTABLE when it doesn't accept timestamptz arguments,
-- and STABLE otherwise. The reason is that occasionally timezones change.
-- When dealing with timestamptz's from the far future, it's possible that
-- between now and then the rules for given TZ will change by local laws. Which
-- makes the function STABLE by the definition [1].
--
-- We don't forbid users to work with timestamptz's from the future, nor warn
-- about this corner case. This behavior is consistent with PostgreSQL
-- behavior [2].
--
-- [1]: https://www.postgresql.org/docs/current/xfunc-volatility.html
-- [2]: https://www.postgresql.org/docs/current/datatype-datetime.html#DATATYPE-TIMEZONES
--
CREATE OR REPLACE FUNCTION timescaledb_experimental.time_bucket_ng(bucket_width INTERVAL, ts DATE) RETURNS DATE
	AS '$libdir/timescaledb-2.4.1', 'ts_time_bucket_ng_date' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;

CREATE OR REPLACE FUNCTION timescaledb_experimental.time_bucket_ng(bucket_width INTERVAL, ts DATE, origin DATE) RETURNS DATE
	AS '$libdir/timescaledb-2.4.1', 'ts_time_bucket_ng_date' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;

-- utility functions
CREATE OR REPLACE FUNCTION timescaledb_experimental.time_bucket_ng(bucket_width INTERVAL, ts TIMESTAMP) RETURNS TIMESTAMP
	AS '$libdir/timescaledb-2.4.1', 'ts_time_bucket_ng_timestamp' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;

CREATE OR REPLACE FUNCTION timescaledb_experimental.time_bucket_ng(bucket_width INTERVAL, ts TIMESTAMP, origin TIMESTAMP) RETURNS TIMESTAMP
	AS '$libdir/timescaledb-2.4.1', 'ts_time_bucket_ng_timestamp' LANGUAGE C IMMUTABLE PARALLEL SAFE STRICT;

CREATE OR REPLACE FUNCTION timescaledb_experimental.time_bucket_ng(bucket_width INTERVAL, ts TIMESTAMPTZ) RETURNS TIMESTAMPTZ
	AS '$libdir/timescaledb-2.4.1', 'ts_time_bucket_ng_timestamptz' LANGUAGE C STABLE PARALLEL SAFE STRICT;

CREATE OR REPLACE FUNCTION timescaledb_experimental.time_bucket_ng(bucket_width INTERVAL, ts TIMESTAMPTZ, origin TIMESTAMPTZ) RETURNS TIMESTAMPTZ
	AS '$libdir/timescaledb-2.4.1', 'ts_time_bucket_ng_timestamptz' LANGUAGE C STABLE PARALLEL SAFE STRICT;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE FUNCTION _timescaledb_internal.get_git_commit()
    RETURNS TABLE(commit_tag TEXT, commit_hash TEXT, commit_time TIMESTAMPTZ)
    AS '$libdir/timescaledb-2.4.1', 'ts_get_git_commit' LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.get_os_info()
    RETURNS TABLE(sysname TEXT, version TEXT, release TEXT, version_pretty TEXT)
    AS '$libdir/timescaledb-2.4.1', 'ts_get_os_info' LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

CREATE OR REPLACE FUNCTION get_telemetry_report(always_display_report boolean DEFAULT false) RETURNS TEXT
    AS '$libdir/timescaledb-2.4.1', 'ts_get_telemetry_report' LANGUAGE C STABLE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.tsl_loaded() RETURNS BOOLEAN
AS '$libdir/timescaledb-2.4.1', 'ts_tsl_loaded' LANGUAGE C;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- This file contains utility functions to get the relation size
-- of hypertables, chunks, and indexes on hypertables.

CREATE OR REPLACE VIEW _timescaledb_internal.hypertable_chunk_local_size AS 
SELECT *, 
   compressed_total_size - COALESCE(compressed_index_size, 0) - COALESCE(compressed_toast_size, 0) as compressed_heap_size
FROM
( SELECT
   h.schema_name AS hypertable_schema,
   h.table_name AS hypertable_name,
   h.id as hypertable_id,
   c.id as chunk_id,
   c.schema_name as chunk_schema,
   c.table_name as chunk_name,
   pg_total_relation_size(format('%I.%I', c.schema_name, c.table_name))::bigint AS total_bytes,
   pg_indexes_size(format('%I.%I', c.schema_name, c.table_name))::bigint AS index_bytes,
   pg_total_relation_size(pgc.reltoastrelid)::bigint AS toast_bytes,
   CASE WHEN map.table_name IS NOT NULL 
        THEN pg_total_relation_size(format('%I.%I', map.schema_name, map.table_name))::bigint 
        ELSE 0
   END AS compressed_total_size,
   CASE WHEN map.table_name IS NOT NULL 
        THEN pg_indexes_size(format('%I.%I', map.schema_name, map.table_name))::bigint 
        ELSE 0
   END AS compressed_index_size,
   CASE WHEN map.reltoastrelid IS NOT NULL 
        THEN pg_total_relation_size(map.reltoastrelid)::bigint 
        ELSE 0
   END AS compressed_toast_size
FROM
   _timescaledb_catalog.hypertable h 
   INNER JOIN
      _timescaledb_catalog.chunk c 
      ON h.id = c.hypertable_id 
      and c.dropped = false 
   INNER JOIN
      pg_class pgc 
      ON pgc.relname = c.table_name 
   INNER JOIN
      pg_namespace pns 
      ON pns.oid = pgc.relnamespace 
      AND pns.nspname = c.schema_name 
   LEFT OUTER JOIN
      ( SELECT comp.id, comp.schema_name, comp.table_name, reltoastrelid
        FROM _timescaledb_catalog.chunk comp, pg_class, pg_namespace
        WHERE comp.table_name = pg_class.relname
        AND comp.schema_name = pg_namespace.nspname
        AND pg_namespace.oid = pg_class.relnamespace ) map
  ON map.id = c.compressed_chunk_id ) subq;

GRANT SELECT ON  _timescaledb_internal.hypertable_chunk_local_size TO PUBLIC;
 
CREATE OR REPLACE FUNCTION _timescaledb_internal.data_node_hypertable_info(
    node_name              NAME,
    schema_name_in name,
    table_name_in name
)
RETURNS TABLE (
    table_bytes     bigint,
    index_bytes     bigint,
    toast_bytes     bigint,
    total_bytes     bigint)
AS '$libdir/timescaledb-2.4.1', 'ts_dist_remote_hypertable_info' LANGUAGE C VOLATILE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.data_node_chunk_info(
    node_name              NAME,
    schema_name_in name,
    table_name_in name
)
RETURNS TABLE (
    chunk_id        integer,
    chunk_schema    name,
    chunk_name      name,
    table_bytes     bigint,
    index_bytes     bigint,
    toast_bytes     bigint,
    total_bytes     bigint)
AS '$libdir/timescaledb-2.4.1', 'ts_dist_remote_chunk_info' LANGUAGE C VOLATILE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.hypertable_local_size(
	schema_name_in name,
	table_name_in name)
RETURNS TABLE (
	table_bytes bigint,
	index_bytes bigint,
	toast_bytes bigint,
	total_bytes bigint)
LANGUAGE SQL VOLATILE STRICT AS
$BODY$
	SELECT
		(COALESCE(sum(ch.total_bytes), 0) - COALESCE(sum(ch.index_bytes), 0) - COALESCE(sum(ch.toast_bytes), 0) + COALESCE(sum(ch.compressed_heap_size), 0))::bigint + pg_relation_size(format('%I.%I', schema_name_in, table_name_in)::regclass)::bigint AS heap_bytes,
		(COALESCE(sum(ch.index_bytes), 0) + COALESCE(sum(ch.compressed_index_size), 0))::bigint + pg_indexes_size(format('%I.%I', schema_name_in, table_name_in)::regclass)::bigint AS index_bytes,
		(COALESCE(sum(ch.toast_bytes), 0) + COALESCE(sum(ch.compressed_toast_size), 0))::bigint AS toast_bytes,
		(COALESCE(sum(ch.total_bytes), 0) + COALESCE(sum(ch.compressed_total_size), 0))::bigint + pg_total_relation_size(format('%I.%I', schema_name_in, table_name_in)::regclass)::bigint AS total_bytes
	FROM
		_timescaledb_internal.hypertable_chunk_local_size ch
	WHERE
		hypertable_schema = schema_name_in
		AND hypertable_name = table_name_in
$BODY$;

CREATE OR REPLACE FUNCTION _timescaledb_internal.hypertable_remote_size(
    schema_name_in name,
    table_name_in name)
RETURNS TABLE (
    table_bytes bigint,
    index_bytes bigint,
    toast_bytes bigint,
    total_bytes bigint,
    node_name   NAME)
LANGUAGE SQL VOLATILE STRICT AS
$BODY$
    SELECT
        sum(entry.table_bytes)::bigint AS table_bytes,
        sum(entry.index_bytes)::bigint AS index_bytes,
        sum(entry.toast_bytes)::bigint AS toast_bytes,
        sum(entry.total_bytes)::bigint AS total_bytes,
        srv.node_name
    FROM (
        SELECT
            s.node_name,
            _timescaledb_internal.ping_data_node (s.node_name) AS node_up
        FROM
            _timescaledb_catalog.hypertable AS ht,
            _timescaledb_catalog.hypertable_data_node AS s
        WHERE
            ht.schema_name = schema_name_in
            AND ht.table_name = table_name_in
            AND s.hypertable_id = ht.id
         ) AS srv
    LEFT OUTER JOIN LATERAL _timescaledb_internal.data_node_hypertable_info(
    CASE WHEN srv.node_up THEN
        srv.node_name
    ELSE
        NULL
    END, schema_name_in, table_name_in) entry ON TRUE
    GROUP BY srv.node_name;
$BODY$;

-- Get relation size of hypertable
-- like pg_relation_size(hypertable)
--
-- hypertable - hypertable to get size of
--
-- Returns:
-- table_bytes        - Disk space used by hypertable (like pg_relation_size(hypertable))
-- index_bytes        - Disk space used by indexes
-- toast_bytes        - Disk space of toast tables
-- total_bytes        - Total disk space used by the specified table, including all indexes and TOAST data

CREATE OR REPLACE FUNCTION hypertable_detailed_size(
    hypertable              REGCLASS)
RETURNS TABLE (table_bytes BIGINT,
               index_bytes BIGINT,
               toast_bytes BIGINT,
               total_bytes BIGINT,
               node_name   NAME)
LANGUAGE PLPGSQL VOLATILE STRICT AS
$BODY$
DECLARE
        table_name       NAME = NULL;
        schema_name      NAME = NULL;
        is_distributed   BOOL = FALSE;
BEGIN
        SELECT relname, nspname, replication_factor > 0
        INTO table_name, schema_name, is_distributed
        FROM pg_class c
        INNER JOIN pg_namespace n ON (n.OID = c.relnamespace)
        INNER JOIN _timescaledb_catalog.hypertable ht ON (ht.schema_name = n.nspname AND ht.table_name = c.relname)
        WHERE c.OID = hypertable;

		IF table_name IS NULL THEN
		    RETURN;
		END IF;

        CASE WHEN is_distributed THEN
			RETURN QUERY
			SELECT *, NULL::name
			FROM _timescaledb_internal.hypertable_local_size(schema_name, table_name)
			UNION
			SELECT *
			FROM _timescaledb_internal.hypertable_remote_size(schema_name, table_name);
        ELSE
			RETURN QUERY
			SELECT *, NULL::name
			FROM _timescaledb_internal.hypertable_local_size(schema_name, table_name);
        END CASE;
END;
$BODY$;

--- returns total-bytes for a hypertable (includes table + index)
CREATE OR REPLACE FUNCTION hypertable_size(
    hypertable              REGCLASS)
RETURNS BIGINT 
LANGUAGE SQL VOLATILE STRICT AS
$BODY$
   -- One row per data node is returned (in case of a distributed
   -- hypertable), so sum them up:
   SELECT sum(total_bytes)::bigint
   FROM hypertable_detailed_size(hypertable);
$BODY$;

CREATE OR REPLACE FUNCTION _timescaledb_internal.chunks_local_size(
    schema_name_in name,
    table_name_in name)
RETURNS TABLE (
    chunk_id    integer,
    chunk_schema NAME,
    chunk_name  NAME,
    table_bytes bigint,
    index_bytes bigint,
    toast_bytes bigint,
    total_bytes bigint)
LANGUAGE SQL VOLATILE STRICT AS
$BODY$
   SELECT
      ch.chunk_id,
      ch.chunk_schema,
      ch.chunk_name,
      (ch.total_bytes - COALESCE( ch.index_bytes , 0 ) - COALESCE( ch.toast_bytes, 0 ) + COALESCE( ch.compressed_heap_size , 0 ))::bigint  as heap_bytes,
      (COALESCE( ch.index_bytes, 0 ) + COALESCE( ch.compressed_index_size , 0) )::bigint as index_bytes,
      (COALESCE( ch.toast_bytes, 0 ) + COALESCE( ch.compressed_toast_size, 0 ))::bigint as toast_bytes,
      (ch.total_bytes + COALESCE( ch.compressed_total_size, 0 ))::bigint as total_bytes 
   FROM
	  _timescaledb_internal.hypertable_chunk_local_size ch
   WHERE
      ch.hypertable_schema = schema_name_in
      AND ch.hypertable_name = table_name_in;
$BODY$;

---should return same information as chunks_local_size--
CREATE OR REPLACE FUNCTION _timescaledb_internal.chunks_remote_size(
    schema_name_in name,
    table_name_in name)
RETURNS TABLE (
    chunk_id    integer,
    chunk_schema NAME,
    chunk_name  NAME,
    table_bytes bigint,
    index_bytes bigint,
    toast_bytes bigint,
    total_bytes bigint,
    node_name NAME)
LANGUAGE SQL VOLATILE STRICT AS
$BODY$
    SELECT
        entry.chunk_id,
        entry.chunk_schema,
        entry.chunk_name,
        entry.table_bytes AS table_bytes,
        entry.index_bytes AS index_bytes,
        entry.toast_bytes AS toast_bytes,
        entry.total_bytes AS total_bytes,
        srv.node_name
    FROM (
        SELECT
            s.node_name,
            _timescaledb_internal.ping_data_node (s.node_name) AS node_up
        FROM
            _timescaledb_catalog.hypertable AS ht,
            _timescaledb_catalog.hypertable_data_node AS s
        WHERE
            ht.schema_name = schema_name_in
            AND ht.table_name = table_name_in
            AND s.hypertable_id = ht.id
         ) AS srv
    LEFT OUTER JOIN LATERAL _timescaledb_internal.data_node_chunk_info(
    CASE WHEN srv.node_up THEN
        srv.node_name
    ELSE
        NULL
    END , schema_name_in, table_name_in) entry ON TRUE
	WHERE
	    entry.chunk_name IS NOT NULL;
$BODY$;

-- Get relation size of the chunks of an hypertable
-- hypertable - hypertable to get size of
--
-- Returns:
-- chunk_schema                  - schema name for chunk
-- chunk_name                    - chunk table name
-- table_bytes                   - Disk space used by chunk table 
-- index_bytes                   - Disk space used by indexes
-- toast_bytes                   - Disk space of toast tables
-- total_bytes                   - Disk space used in total
-- node_name                     - node on which chunk lives if this is
--                              a distributed hypertable.
CREATE OR REPLACE FUNCTION chunks_detailed_size(
    hypertable              REGCLASS
)
RETURNS TABLE (
               chunk_schema NAME,
               chunk_name NAME,
               table_bytes BIGINT,
               index_bytes BIGINT,
               toast_bytes BIGINT,
               total_bytes BIGINT,
               node_name   NAME)
LANGUAGE PLPGSQL VOLATILE STRICT AS
$BODY$
DECLARE
        table_name       NAME;
        schema_name      NAME;
        is_distributed   BOOL;
BEGIN
        SELECT relname, nspname, replication_factor > 0
        INTO table_name, schema_name, is_distributed
        FROM pg_class c
        INNER JOIN pg_namespace n ON (n.OID = c.relnamespace)
        INNER JOIN _timescaledb_catalog.hypertable ht ON (ht.schema_name = n.nspname AND ht.table_name = c.relname)
        WHERE c.OID = hypertable;

		IF table_name IS NULL THEN
		    RETURN;
		END IF;

        CASE WHEN is_distributed THEN
            RETURN QUERY SELECT ch.chunk_schema, ch.chunk_name, ch.table_bytes, ch.index_bytes, 
                        ch.toast_bytes, ch.total_bytes, ch.node_name   
            FROM _timescaledb_internal.chunks_remote_size(schema_name, table_name) ch;
        ELSE
            RETURN QUERY SELECT chl.chunk_schema, chl.chunk_name, chl.table_bytes, chl.index_bytes, 
                        chl.toast_bytes, chl.total_bytes, NULL::NAME   
            FROM _timescaledb_internal.chunks_local_size(schema_name, table_name) chl;
        END CASE;
END;
$BODY$;
---------- end of detailed size functions ------

CREATE OR REPLACE FUNCTION _timescaledb_internal.range_value_to_pretty(
    time_value      BIGINT,
    column_type     REGTYPE
)
    RETURNS TEXT LANGUAGE PLPGSQL STABLE AS
$BODY$
DECLARE
BEGIN
    IF NOT _timescaledb_internal.dimension_is_finite(time_value) THEN
        RETURN '';
    END IF;
    IF time_value IS NULL THEN
        RETURN format('%L', NULL);
    END IF;
    CASE column_type
      WHEN 'BIGINT'::regtype, 'INTEGER'::regtype, 'SMALLINT'::regtype THEN
        RETURN format('%L', time_value); -- scale determined by user.
      WHEN 'TIMESTAMP'::regtype, 'TIMESTAMPTZ'::regtype THEN
        -- assume time_value is in microsec
        RETURN format('%1$L', _timescaledb_internal.to_timestamp(time_value)); -- microseconds
      WHEN 'DATE'::regtype THEN
        RETURN format('%L', timezone('UTC',_timescaledb_internal.to_timestamp(time_value))::date);
      ELSE
        RETURN time_value;
    END CASE;
END
$BODY$;

-- Convenience function to return approximate row count
--
-- relation - table or hypertable to get approximate row count for
--
-- Returns:
-- Estimated number of rows according to catalog tables
CREATE OR REPLACE FUNCTION approximate_row_count(relation REGCLASS)
RETURNS BIGINT
LANGUAGE PLPGSQL VOLATILE STRICT AS
$BODY$
DECLARE
	table_name       NAME;
	schema_name      NAME;
	row_count_parent BIGINT;
	row_count        BIGINT;
BEGIN
	SELECT relname, nspname, CASE WHEN c.reltuples > 0 THEN c.reltuples::bigint ELSE 0 END
	INTO table_name, schema_name, row_count_parent
	FROM pg_class c
	INNER JOIN pg_namespace n ON (n.OID = c.relnamespace)
	WHERE c.OID = relation;

	WITH RECURSIVE inherited_id AS
	(
		SELECT i.inhrelid AS oid
		FROM pg_inherits i
		JOIN pg_class base ON i.inhparent = base.oid
		JOIN pg_namespace base_ns ON base.relnamespace = base_ns.oid
		WHERE base_ns.nspname = schema_name AND base.relname = table_name
		UNION
		SELECT i.inhrelid AS oid
		FROM pg_inherits i
		JOIN inherited_id b ON i.inhparent = b.oid
	)
	SELECT sum(CASE WHEN child.reltuples > 0 THEN child.reltuples ELSE 0 END)::bigint
	INTO row_count
	FROM inherited_id i
	JOIN pg_class child ON i.oid = child.oid
	JOIN pg_namespace child_ns ON child.relnamespace = child_ns.oid;

	IF row_count IS NULL THEN
		RETURN row_count_parent;
	END IF;
	RETURN row_count_parent + row_count;
END
$BODY$;

-------- stats related to compression ------
CREATE OR REPLACE VIEW _timescaledb_internal.compressed_chunk_stats AS
SELECT
    srcht.schema_name AS hypertable_schema,
    srcht.table_name AS hypertable_name,
    srcch.schema_name AS chunk_schema,
    srcch.table_name AS chunk_name,
    CASE WHEN srcch.compressed_chunk_id IS NULL THEN
        'Uncompressed'::text
    ELSE
        'Compressed'::text
    END AS compression_status,
    map.uncompressed_heap_size,
    map.uncompressed_index_size,
    map.uncompressed_toast_size,
    map.uncompressed_heap_size + map.uncompressed_toast_size + map.uncompressed_index_size AS uncompressed_total_size,
    map.compressed_heap_size,
    map.compressed_index_size,
    map.compressed_toast_size,
    map.compressed_heap_size + map.compressed_toast_size + map.compressed_index_size AS compressed_total_size
FROM
    _timescaledb_catalog.hypertable AS srcht
    JOIN _timescaledb_catalog.chunk AS srcch ON srcht.id = srcch.hypertable_id
        AND srcht.compressed_hypertable_id IS NOT NULL
        AND srcch.dropped = FALSE
    LEFT JOIN _timescaledb_catalog.compression_chunk_size map ON srcch.id = map.chunk_id;

GRANT SELECT ON _timescaledb_internal.compressed_chunk_stats TO PUBLIC;

CREATE OR REPLACE FUNCTION _timescaledb_internal.data_node_compressed_chunk_stats (node_name name, schema_name_in name, table_name_in name)
    RETURNS TABLE (
        chunk_schema name,
        chunk_name name,
        compression_status text,
        before_compression_table_bytes bigint,
        before_compression_index_bytes bigint,
        before_compression_toast_bytes bigint,
        before_compression_total_bytes bigint,
        after_compression_table_bytes bigint,
        after_compression_index_bytes bigint,
        after_compression_toast_bytes bigint,
        after_compression_total_bytes bigint
    )
AS '$libdir/timescaledb-2.4.1' , 'ts_dist_remote_compressed_chunk_info' LANGUAGE C VOLATILE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.compressed_chunk_local_stats (schema_name_in name, table_name_in name)
    RETURNS TABLE (
        chunk_schema name,
        chunk_name name,
        compression_status text,
        before_compression_table_bytes bigint,
        before_compression_index_bytes bigint,
        before_compression_toast_bytes bigint,
        before_compression_total_bytes bigint,
        after_compression_table_bytes bigint,
        after_compression_index_bytes bigint,
        after_compression_toast_bytes bigint,
        after_compression_total_bytes bigint)
    LANGUAGE SQL
    STABLE STRICT
    AS
$BODY$
    SELECT
        ch.chunk_schema,
        ch.chunk_name,
        ch.compression_status,
        ch.uncompressed_heap_size,
        ch.uncompressed_index_size,
        ch.uncompressed_toast_size,
        ch.uncompressed_total_size,
        ch.compressed_heap_size,
        ch.compressed_index_size,
        ch.compressed_toast_size,
        ch.compressed_total_size
    FROM
        _timescaledb_internal.compressed_chunk_stats ch
    WHERE
        ch.hypertable_schema = schema_name_in
        AND ch.hypertable_name = table_name_in;
$BODY$;

CREATE OR REPLACE FUNCTION _timescaledb_internal.compressed_chunk_remote_stats (schema_name_in name, table_name_in name)
    RETURNS TABLE (
        chunk_schema name,
        chunk_name name,
        compression_status text,
        before_compression_table_bytes bigint,
        before_compression_index_bytes bigint,
        before_compression_toast_bytes bigint,
        before_compression_total_bytes bigint,
        after_compression_table_bytes bigint,
        after_compression_index_bytes bigint,
        after_compression_toast_bytes bigint,
        after_compression_total_bytes bigint,
        node_name name)
    LANGUAGE SQL
    STABLE STRICT
    AS
$BODY$
    SELECT
        ch.*,
        srv.node_name
    FROM (
        SELECT
            s.node_name,
            _timescaledb_internal.ping_data_node (s.node_name) AS node_up
        FROM
            _timescaledb_catalog.hypertable AS ht,
            _timescaledb_catalog.hypertable_data_node AS s
        WHERE
            ht.schema_name = schema_name_in
            AND ht.table_name = table_name_in
            AND s.hypertable_id = ht.id) AS srv
    LEFT OUTER JOIN LATERAL _timescaledb_internal.data_node_compressed_chunk_stats (
    CASE WHEN srv.node_up THEN
        srv.node_name
    ELSE
        NULL
    END, schema_name_in, table_name_in) ch ON TRUE
	WHERE ch.chunk_name IS NOT NULL;
$BODY$;

-- Get per chunk compression statistics for a hypertable that has
-- compression enabled
CREATE OR REPLACE FUNCTION chunk_compression_stats (hypertable REGCLASS)
    RETURNS TABLE (
        chunk_schema name,
        chunk_name name,
        compression_status text,
        before_compression_table_bytes bigint,
        before_compression_index_bytes bigint,
        before_compression_toast_bytes bigint,
        before_compression_total_bytes bigint,
        after_compression_table_bytes bigint,
        after_compression_index_bytes bigint,
        after_compression_toast_bytes bigint,
        after_compression_total_bytes bigint,
        node_name name)
    LANGUAGE PLPGSQL
    STABLE STRICT
    AS $BODY$
DECLARE
    table_name name;
    schema_name name;
    is_distributed bool;
BEGIN
    SELECT
        relname,
        nspname,
        replication_factor > 0
    INTO
	    table_name,
        schema_name,
        is_distributed
    FROM
        pg_class c
        INNER JOIN pg_namespace n ON (n.OID = c.relnamespace)
        INNER JOIN _timescaledb_catalog.hypertable ht ON (ht.schema_name = n.nspname
                AND ht.table_name = c.relname)
    WHERE
        c.OID = hypertable;

    IF table_name IS NULL THEN
	    RETURN;
	END IF;

    CASE WHEN is_distributed THEN
        RETURN QUERY
        SELECT
            *
        FROM
            _timescaledb_internal.compressed_chunk_remote_stats (schema_name, table_name);
    ELSE
        RETURN QUERY
        SELECT
            *,
            NULL::name
        FROM
            _timescaledb_internal.compressed_chunk_local_stats (schema_name, table_name);
    END CASE;
END;
$BODY$;

-- Get compression statistics for a hypertable that has
-- compression enabled
CREATE OR REPLACE FUNCTION hypertable_compression_stats (hypertable REGCLASS)
    RETURNS TABLE (
        total_chunks bigint,
        number_compressed_chunks bigint,
        before_compression_table_bytes bigint,
        before_compression_index_bytes bigint,
        before_compression_toast_bytes bigint,
        before_compression_total_bytes bigint,
        after_compression_table_bytes bigint,
        after_compression_index_bytes bigint,
        after_compression_toast_bytes bigint,
        after_compression_total_bytes bigint,
        node_name name)
    LANGUAGE SQL
    STABLE STRICT
    AS	
$BODY$
	SELECT
        count(*)::bigint AS total_chunks,
        (count(*) FILTER (WHERE ch.compression_status = 'Compressed'))::bigint AS number_compressed_chunks,
        sum(ch.before_compression_table_bytes)::bigint AS before_compression_table_bytes,
        sum(ch.before_compression_index_bytes)::bigint AS before_compression_index_bytes,
        sum(ch.before_compression_toast_bytes)::bigint AS before_compression_toast_bytes,
        sum(ch.before_compression_total_bytes)::bigint AS before_compression_total_bytes,
        sum(ch.after_compression_table_bytes)::bigint AS after_compression_table_bytes,
        sum(ch.after_compression_index_bytes)::bigint AS after_compression_index_bytes,
        sum(ch.after_compression_toast_bytes)::bigint AS after_compression_toast_bytes,
        sum(ch.after_compression_total_bytes)::bigint AS after_compression_total_bytes,
        ch.node_name
    FROM
	    chunk_compression_stats(hypertable) ch
    GROUP BY
        ch.node_name;
$BODY$;

-------------Get index size for hypertables -------
--schema_name      - schema_name for hypertable index
-- index_name      - index on hyper table
---note that the query matches against the hypertable's schema name as
-- the input is on the hypertable index and not the chunk index.
CREATE OR REPLACE FUNCTION _timescaledb_internal.indexes_local_size(
    schema_name_in             NAME,
    index_name_in              NAME
)
RETURNS TABLE ( hypertable_id INTEGER,
                total_bytes BIGINT ) 
LANGUAGE SQL VOLATILE STRICT AS
$BODY$
    WITH chunk_index_size (num_bytes) AS (
        SELECT
		    COALESCE(sum(pg_relation_size(c.oid)), 0)::bigint
        FROM                                      
            pg_class c,
            pg_namespace n,
            _timescaledb_catalog.chunk ch,
            _timescaledb_catalog.chunk_index ci,
			_timescaledb_catalog.hypertable h
         WHERE ch.schema_name = n.nspname
             AND c.relnamespace = n.oid
             AND c.relname = ci.index_name
             AND ch.id = ci.chunk_id
             AND h.id = ci.hypertable_id
             AND h.schema_name = schema_name_in 
             AND ci.hypertable_index_name = index_name_in
    ) SELECT
	      h.id,
		  -- Add size of index on all chunks + index size on root table
		  (SELECT num_bytes FROM chunk_index_size) + pg_relation_size(format('%I.%I', schema_name_in, index_name_in)::regclass)::bigint
	  FROM
	      pg_class c, pg_index i, _timescaledb_catalog.hypertable h
	  WHERE
	     i.indexrelid = format('%I.%I', schema_name_in, index_name_in)::regclass
		 AND c.oid = i.indrelid
		 AND h.schema_name = schema_name_in
		 AND h.table_name = c.relname;
$BODY$;

CREATE OR REPLACE FUNCTION _timescaledb_internal.data_node_index_size (node_name name, schema_name_in name, index_name_in name)
RETURNS TABLE ( hypertable_id INTEGER, total_bytes BIGINT)
AS '$libdir/timescaledb-2.4.1' , 'ts_dist_remote_hypertable_index_info' LANGUAGE C VOLATILE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.indexes_remote_size(
    schema_name_in             NAME,
    table_name_in              NAME,
    index_name_in              NAME
)
RETURNS BIGINT
LANGUAGE SQL VOLATILE STRICT AS
$BODY$
    SELECT
        sum(entry.total_bytes)::bigint AS total_bytes
    FROM (
        SELECT
            s.node_name,
            _timescaledb_internal.ping_data_node (s.node_name) AS node_up
        FROM
            _timescaledb_catalog.hypertable AS ht,
            _timescaledb_catalog.hypertable_data_node AS s
        WHERE
            ht.schema_name = schema_name_in
            AND ht.table_name = table_name_in
            AND s.hypertable_id = ht.id
         ) AS srv
    JOIN LATERAL _timescaledb_internal.data_node_index_size(
    CASE WHEN srv.node_up THEN
        srv.node_name
    ELSE
        NULL
    END, schema_name_in, index_name_in) entry ON TRUE;
$BODY$;

-- Get sizes of indexes on a hypertable
--
-- index_name           - index on hyper table
--
-- Returns:
-- total_bytes          - size of index on disk

CREATE OR REPLACE FUNCTION  hypertable_index_size(
    index_name              REGCLASS
)
RETURNS BIGINT
LANGUAGE PLPGSQL VOLATILE STRICT AS
$BODY$
DECLARE
        ht_index_name       NAME;
        ht_schema_name      NAME;
        ht_name      NAME;
        is_distributed   BOOL;
        ht_id INTEGER;
        index_bytes BIGINT;
BEGIN
   SELECT c.relname, cl.relname, nsp.nspname, ht.replication_factor > 0
   INTO ht_index_name, ht_name, ht_schema_name, is_distributed
   FROM pg_class c, pg_index cind, pg_class cl,
        pg_namespace nsp, _timescaledb_catalog.hypertable ht
   WHERE c.oid = cind.indexrelid AND cind.indrelid = cl.oid
         AND cl.relnamespace = nsp.oid AND c.oid = index_name
		 AND ht.schema_name = nsp.nspname ANd ht.table_name = cl.relname;

   IF ht_index_name IS NULL THEN
       RETURN NULL;
   END IF;

   -- get the local size or size of access node indexes
   SELECT il.total_bytes
   INTO index_bytes
   FROM _timescaledb_internal.indexes_local_size(ht_schema_name, ht_index_name) il;

   IF index_bytes IS NULL THEN
       index_bytes = 0;
   END IF;

   -- Add size from data nodes
   IF is_distributed THEN
       index_bytes = index_bytes + _timescaledb_internal.indexes_remote_size(ht_schema_name, ht_name, ht_index_name);
   END IF;

   RETURN index_bytes;
END;
$BODY$;

-------------End index size for hypertables -------
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE FUNCTION _timescaledb_internal.hist_sfunc (state INTERNAL, val DOUBLE PRECISION, MIN DOUBLE PRECISION, MAX DOUBLE PRECISION, nbuckets INTEGER)
RETURNS INTERNAL
AS '$libdir/timescaledb-2.4.1', 'ts_hist_sfunc'
LANGUAGE C IMMUTABLE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.hist_combinefunc(state1 INTERNAL, state2 INTERNAL)
RETURNS INTERNAL
AS '$libdir/timescaledb-2.4.1', 'ts_hist_combinefunc'
LANGUAGE C IMMUTABLE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.hist_serializefunc(INTERNAL)
RETURNS bytea
AS '$libdir/timescaledb-2.4.1', 'ts_hist_serializefunc'
LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.hist_deserializefunc(bytea, INTERNAL)
RETURNS INTERNAL
AS '$libdir/timescaledb-2.4.1', 'ts_hist_deserializefunc'
LANGUAGE C IMMUTABLE STRICT PARALLEL SAFE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.hist_finalfunc(state INTERNAL, val DOUBLE PRECISION, MIN DOUBLE PRECISION, MAX DOUBLE PRECISION, nbuckets INTEGER)
RETURNS INTEGER[]
AS '$libdir/timescaledb-2.4.1', 'ts_hist_finalfunc'
LANGUAGE C IMMUTABLE PARALLEL SAFE;

-- We started using CREATE OR REPLACE AGGREGATE for aggregate creation once the syntax was fully supported
-- as it is easier to support idempotent changes this way. This will allow for changes to functions supporting
-- the aggregate, and, for instance, the definition and inclusion of inverse functions for window function
-- support. However, it should still be noted that changes to the data structures used for the internal
-- state of the aggregate must be backwards compatible and the old format must be accepted by any new functions
-- in order for them to continue working with Continuous Aggregates, where old states may have been materialized.

-- This aggregate partitions the dataset into a specified number of buckets (nbuckets) ranging
-- from the inputted min to max values.
CREATE OR REPLACE AGGREGATE histogram (DOUBLE PRECISION, DOUBLE PRECISION, DOUBLE PRECISION, INTEGER) (
    SFUNC = _timescaledb_internal.hist_sfunc,
    STYPE = INTERNAL,
    COMBINEFUNC = _timescaledb_internal.hist_combinefunc,
    SERIALFUNC = _timescaledb_internal.hist_serializefunc,
    DESERIALFUNC = _timescaledb_internal.hist_deserializefunc,
    PARALLEL = SAFE,
    FINALFUNC = _timescaledb_internal.hist_finalfunc,
    FINALFUNC_EXTRA
);
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- This file contains infrastructure for cache invalidation of TimescaleDB
-- metadata caches kept in C. Please look at cache_invalidate.c for a
-- description of how this works.
CREATE TABLE IF NOT EXISTS  _timescaledb_cache.cache_inval_hypertable();

-- For notifying the scheduler of changes to the bgw_job table.
CREATE TABLE IF NOT EXISTS  _timescaledb_cache.cache_inval_bgw_job();

-- This is pretty subtle. We create this dummy cache_inval_extension table
-- solely for the purpose of getting a relcache invalidation event when it is
-- deleted on DROP extension. It has no related triggers. When the table is
-- invalidated, all backends will be notified and will know that they must
-- invalidate all cached information, including catalog table and index OIDs,
-- etc.
CREATE TABLE IF NOT EXISTS  _timescaledb_cache.cache_inval_extension();

-- not actually strictly needed but good for sanity as all tables should be dumped.
SELECT pg_catalog.pg_extension_config_dump('_timescaledb_cache.cache_inval_hypertable', '');
SELECT pg_catalog.pg_extension_config_dump('_timescaledb_cache.cache_inval_extension', '');
SELECT pg_catalog.pg_extension_config_dump('_timescaledb_cache.cache_inval_bgw_job', '');

GRANT SELECT ON ALL TABLES IN SCHEMA _timescaledb_cache TO PUBLIC;

-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE FUNCTION _timescaledb_internal.restart_background_workers()
RETURNS BOOL
AS '$libdir/timescaledb', 'ts_bgw_db_workers_restart'
LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.stop_background_workers()
RETURNS BOOL
AS '$libdir/timescaledb', 'ts_bgw_db_workers_stop'
LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.start_background_workers()
RETURNS BOOL
AS '$libdir/timescaledb', 'ts_bgw_db_workers_start'
LANGUAGE C VOLATILE;

INSERT INTO _timescaledb_config.bgw_job (id, application_name, schedule_interval, max_runtime, max_retries, retry_period, proc_schema, proc_name, owner, scheduled) VALUES
(1, 'Telemetry Reporter [1]', INTERVAL '24h', INTERVAL '100s', -1, INTERVAL '1h', '_timescaledb_internal', 'policy_telemetry', CURRENT_ROLE, true)
ON CONFLICT (id) DO NOTHING;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE FUNCTION _timescaledb_internal.generate_uuid() RETURNS UUID
AS '$libdir/timescaledb-2.4.1', 'ts_uuid_generate' LANGUAGE C VOLATILE STRICT;

-- Insert uuid and install_timestamp on database creation. Don't
-- create exported_uuid because it gets exported and installed during
-- pg_dump, which would cause a conflict.
INSERT INTO _timescaledb_catalog.metadata
SELECT 'uuid', _timescaledb_internal.generate_uuid(), TRUE ON CONFLICT DO NOTHING;
INSERT INTO _timescaledb_catalog.metadata
SELECT 'install_timestamp', now(), TRUE ON CONFLICT DO NOTHING;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE FUNCTION _timescaledb_internal.set_dist_id(dist_id UUID) RETURNS BOOL
AS '$libdir/timescaledb-2.4.1', 'ts_dist_set_id' LANGUAGE C VOLATILE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.set_peer_dist_id(dist_id UUID) RETURNS BOOL
AS '$libdir/timescaledb-2.4.1', 'ts_dist_set_peer_id' LANGUAGE C VOLATILE STRICT;

-- Function to validate that a node has local settings to function as
-- a data node. Throws error if validation fails.
CREATE OR REPLACE FUNCTION _timescaledb_internal.validate_as_data_node() RETURNS void
AS '$libdir/timescaledb-2.4.1', 'ts_dist_validate_as_data_node' LANGUAGE C VOLATILE STRICT;

CREATE OR REPLACE FUNCTION _timescaledb_internal.show_connection_cache()
RETURNS TABLE (
    node_name           name,
    user_name           name,
    host                text,
    port                int,
    database            name,
    backend_pid         int,
    connection_status   text,
    transaction_status  text,
    transaction_depth   int,
    processing          boolean,
    invalidated         boolean)
AS '$libdir/timescaledb-2.4.1', 'ts_remote_connection_cache_show' LANGUAGE C VOLATILE STRICT;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE SCHEMA IF NOT EXISTS timescaledb_information;

-- Convenience view to list all hypertables
CREATE OR REPLACE VIEW timescaledb_information.hypertables AS
SELECT ht.schema_name AS hypertable_schema,
  ht.table_name AS hypertable_name,
  t.tableowner AS owner,
  ht.num_dimensions,
  (
    SELECT count(1)
    FROM _timescaledb_catalog.chunk ch
    WHERE ch.hypertable_id = ht.id) AS num_chunks,
  (
    CASE WHEN compression_state = 1 THEN
      TRUE 
    ELSE
      FALSE 
    END) AS compression_enabled,
  (
    CASE WHEN ht.replication_factor > 0 THEN
      TRUE
    ELSE
      FALSE
    END) AS is_distributed,
  ht.replication_factor,
  dn.node_list AS data_nodes,
  srchtbs.tablespace_list AS tablespaces
FROM _timescaledb_catalog.hypertable ht
  INNER JOIN pg_tables t ON ht.table_name = t.tablename
    AND ht.schema_name = t.schemaname
  LEFT OUTER JOIN _timescaledb_catalog.continuous_agg ca ON ca.mat_hypertable_id = ht.id
  LEFT OUTER JOIN (
    SELECT hypertable_id,
      array_agg(tablespace_name ORDER BY id) AS tablespace_list
    FROM _timescaledb_catalog.tablespace
    GROUP BY hypertable_id) srchtbs ON ht.id = srchtbs.hypertable_id
  LEFT OUTER JOIN (
  SELECT hypertable_id,
    array_agg(node_name ORDER BY node_name) AS node_list
  FROM _timescaledb_catalog.hypertable_data_node
  GROUP BY hypertable_id) dn ON ht.id = dn.hypertable_id
WHERE ht.compression_state != 2 --> no internal compression tables
  AND ca.mat_hypertable_id IS NULL;

CREATE OR REPLACE VIEW timescaledb_information.job_stats AS
SELECT ht.schema_name AS hypertable_schema,
  ht.table_name AS hypertable_name,
  j.id AS job_id,
  js.last_start AS last_run_started_at,
  js.last_successful_finish AS last_successful_finish,
  CASE WHEN js.last_finish < '4714-11-24 00:00:00+00 BC' THEN
    NULL
  WHEN js.last_finish IS NOT NULL THEN
    CASE WHEN js.last_run_success = 't' THEN
      'Success'
    WHEN js.last_run_success = 'f' THEN
      'Failed'
    END
  END AS last_run_status,
  CASE WHEN pgs.state = 'active' THEN
    'Running'
  WHEN j.scheduled = FALSE THEN
    'Paused'
  ELSE
    'Scheduled'
  END AS job_status,
  CASE WHEN js.last_finish > js.last_start THEN
  (js.last_finish - js.last_start)
  END AS last_run_duration,
  CASE WHEN j.scheduled THEN
    js.next_start
  END AS next_start,
  js.total_runs,
  js.total_successes,
  js.total_failures
FROM _timescaledb_config.bgw_job j
  INNER JOIN _timescaledb_internal.bgw_job_stat js ON j.id = js.job_id
  LEFT JOIN _timescaledb_catalog.hypertable ht ON j.hypertable_id = ht.id
  LEFT JOIN pg_stat_activity pgs ON pgs.datname = current_database()
    AND pgs.application_name = j.application_name
  ORDER BY ht.schema_name,
    ht.table_name;

-- view for background worker jobs
CREATE OR REPLACE VIEW timescaledb_information.jobs AS
SELECT j.id AS job_id,
  j.application_name,
  j.schedule_interval,
  j.max_runtime,
  j.max_retries,
  j.retry_period,
  j.proc_schema,
  j.proc_name,
  j.owner,
  j.scheduled,
  j.config,
  js.next_start,
  ht.schema_name AS hypertable_schema,
  ht.table_name AS hypertable_name
FROM _timescaledb_config.bgw_job j
  LEFT JOIN _timescaledb_catalog.hypertable ht ON ht.id = j.hypertable_id
  LEFT JOIN _timescaledb_internal.bgw_job_stat js ON js.job_id = j.id;

-- views for continuous aggregate queries ---
CREATE OR REPLACE VIEW timescaledb_information.continuous_aggregates AS
SELECT ht.schema_name AS hypertable_schema,
  ht.table_name AS hypertable_name,
  cagg.user_view_schema AS view_schema,
  cagg.user_view_name AS view_name,
  viewinfo.viewowner AS view_owner,
  cagg.materialized_only,
  mat_ht.schema_name AS materialization_hypertable_schema,
  mat_ht.table_name AS materialization_hypertable_name,
  directview.viewdefinition AS view_definition
FROM _timescaledb_catalog.continuous_agg cagg,
  _timescaledb_catalog.hypertable ht,
  LATERAL (
    SELECT C.oid,
      pg_get_userbyid(C.relowner) AS viewowner
    FROM pg_class C
      LEFT JOIN pg_namespace N ON (N.oid = C.relnamespace)
    WHERE C.relkind = 'v'
      AND C.relname = cagg.user_view_name
      AND N.nspname = cagg.user_view_schema) viewinfo,
  LATERAL (
    SELECT pg_get_viewdef(C.oid) AS viewdefinition
    FROM pg_class C
    LEFT JOIN pg_namespace N ON (N.oid = C.relnamespace)
  WHERE C.relkind = 'v'
    AND C.relname = cagg.direct_view_name
    AND N.nspname = cagg.direct_view_schema) directview,
  LATERAL (
    SELECT schema_name, table_name
    FROM _timescaledb_catalog.hypertable
    WHERE cagg.mat_hypertable_id = id) mat_ht
WHERE cagg.raw_hypertable_id = ht.id;

CREATE OR REPLACE VIEW timescaledb_information.data_nodes AS
SELECT s.node_name,
  s.owner,
  s.options
FROM (
  SELECT srvname AS node_name,
    srvowner::regrole::name AS owner,
    srvoptions AS options
  FROM pg_catalog.pg_foreign_server AS srv,
    pg_catalog.pg_foreign_data_wrapper AS fdw
  WHERE srv.srvfdw = fdw.oid
    AND fdw.fdwname = 'timescaledb_fdw') AS s;

-- chunks metadata view, shows information about the primary dimension column
-- query plans with CTEs are not always optimized by PG. So use in-line
-- tables.

CREATE OR REPLACE VIEW timescaledb_information.chunks AS
SELECT hypertable_schema,
  hypertable_name,
  schema_name AS chunk_schema,
  chunk_name,
  primary_dimension,
  primary_dimension_type,
  range_start,
  range_end,
  integer_range_start AS range_start_integer,
  integer_range_end AS range_end_integer,
  is_compressed,
  chunk_table_space AS chunk_tablespace,
  node_list AS data_nodes
FROM (
  SELECT ht.schema_name AS hypertable_schema,
    ht.table_name AS hypertable_name,
    srcch.schema_name AS schema_name,
    srcch.table_name AS chunk_name,
    dim.column_name AS primary_dimension,
    dim.column_type AS primary_dimension_type,
    row_number() OVER (PARTITION BY chcons.chunk_id ORDER BY dim.id) AS chunk_dimension_num,
    CASE WHEN (dim.column_type = 'TIMESTAMP'::regtype
      OR dim.column_type = 'TIMESTAMPTZ'::regtype
      OR dim.column_type = 'DATE'::regtype) THEN
      _timescaledb_internal.to_timestamp(dimsl.range_start)
    ELSE
      NULL
    END AS range_start,
    CASE WHEN (dim.column_type = 'TIMESTAMP'::regtype
      OR dim.column_type = 'TIMESTAMPTZ'::regtype
      OR dim.column_type = 'DATE'::regtype) THEN
      _timescaledb_internal.to_timestamp(dimsl.range_end)
    ELSE
      NULL
    END AS range_end,
    CASE WHEN (dim.column_type = 'TIMESTAMP'::regtype
      OR dim.column_type = 'TIMESTAMPTZ'::regtype
      OR dim.column_type = 'DATE'::regtype) THEN
      NULL
    ELSE
      dimsl.range_start
    END AS integer_range_start,
    CASE WHEN (dim.column_type = 'TIMESTAMP'::regtype
      OR dim.column_type = 'TIMESTAMPTZ'::regtype
      OR dim.column_type = 'DATE'::regtype) THEN
      NULL
    ELSE
      dimsl.range_end
    END AS integer_range_end,
    CASE WHEN (srcch.status & 1 = 1) THEN --distributed compress_chunk() has definitely been called
                                          --remote chunk compression status still uncertain
        TRUE
    ELSE FALSE --remote chunk compression status uncertain
    END AS is_compressed,
    pgtab.spcname AS chunk_table_space,
    chdn.node_list
  FROM _timescaledb_catalog.chunk srcch
    INNER JOIN _timescaledb_catalog.hypertable ht ON ht.id = srcch.hypertable_id
    INNER JOIN _timescaledb_catalog.chunk_constraint chcons ON srcch.id = chcons.chunk_id
    INNER JOIN _timescaledb_catalog.dimension dim ON srcch.hypertable_id = dim.hypertable_id
    INNER JOIN _timescaledb_catalog.dimension_slice dimsl ON dim.id = dimsl.dimension_id
      AND chcons.dimension_slice_id = dimsl.id
    INNER JOIN (
      SELECT relname,
        reltablespace,
        nspname AS schema_name
      FROM pg_class,
        pg_namespace
      WHERE pg_class.relnamespace = pg_namespace.oid) cl ON srcch.table_name = cl.relname
      AND srcch.schema_name = cl.schema_name
    LEFT OUTER JOIN pg_tablespace pgtab ON pgtab.oid = reltablespace
  LEFT OUTER JOIN (
    SELECT chunk_id,
      array_agg(node_name ORDER BY node_name) AS node_list
    FROM _timescaledb_catalog.chunk_data_node
    GROUP BY chunk_id) chdn ON srcch.id = chdn.chunk_id
  WHERE srcch.dropped IS FALSE
    AND ht.compression_state != 2 ) finalq
WHERE chunk_dimension_num = 1;

-- hypertable's dimension information
-- CTEs aren't used in the query as PG does not always optimize them
-- as expected.

CREATE OR REPLACE VIEW timescaledb_information.dimensions AS
SELECT ht.schema_name AS hypertable_schema,
  ht.table_name AS hypertable_name,
  rank() OVER (PARTITION BY hypertable_id ORDER BY dim.id) AS dimension_number,
  dim.column_name,
  dim.column_type,
  CASE WHEN dim.interval_length IS NULL THEN
    'Space'
  ELSE
    'Time'
  END AS dimension_type,
  CASE WHEN dim.interval_length IS NOT NULL THEN
    CASE WHEN dim.column_type = 'TIMESTAMP'::regtype
      OR dim.column_type = 'TIMESTAMPTZ'::regtype
      OR dim.column_type = 'DATE'::regtype THEN
      _timescaledb_internal.to_interval (dim.interval_length)
    ELSE
      NULL
    END
  END AS time_interval,
  CASE WHEN dim.interval_length IS NOT NULL THEN
    CASE WHEN dim.column_type = 'TIMESTAMP'::regtype
      OR dim.column_type = 'TIMESTAMPTZ'::regtype
      OR dim.column_type = 'DATE'::regtype THEN
      NULL
    ELSE
      dim.interval_length
    END
  END AS integer_interval,
  dim.integer_now_func,
  dim.num_slices AS num_partitions
FROM _timescaledb_catalog.hypertable ht,
  _timescaledb_catalog.dimension dim
WHERE dim.hypertable_id = ht.id;

---compression parameters information ---
CREATE OR REPLACE VIEW timescaledb_information.compression_settings AS
SELECT ht.schema_name AS hypertable_schema,
  ht.table_name AS hypertable_name,
  segq.attname,
  segq.segmentby_column_index,
  segq.orderby_column_index,
  segq.orderby_asc,
  segq.orderby_nullsfirst
FROM _timescaledb_catalog.hypertable_compression segq,
  _timescaledb_catalog.hypertable ht
WHERE segq.hypertable_id = ht.id
  AND (segq.segmentby_column_index IS NOT NULL
    OR segq.orderby_column_index IS NOT NULL)
ORDER BY table_name,
  segmentby_column_index,
  orderby_column_index;

GRANT USAGE ON SCHEMA timescaledb_information TO PUBLIC;

GRANT SELECT ON ALL TABLES IN SCHEMA timescaledb_information TO PUBLIC;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE VIEW timescaledb_experimental.chunk_replication_status AS
SELECT
    h.schema_name AS hypertable_schema,
    h.table_name AS hypertable_name,
    c.schema_name AS chunk_schema,
    c.table_name AS chunk_name,
    h.replication_factor AS desired_num_replicas,
    count(cdn.chunk_id) AS num_replicas,
    array_agg(cdn.node_name) AS replica_nodes,
    -- compute the set of data nodes that doesn't have the chunk
    (SELECT array_agg(node_name) FROM
            (SELECT node_name FROM _timescaledb_catalog.hypertable_data_node hdn
             WHERE hdn.hypertable_id = h.id
             EXCEPT
             SELECT node_name FROM _timescaledb_catalog.chunk_data_node cdn
             WHERE cdn.chunk_id = c.id
             ORDER BY node_name) nodes) AS non_replica_nodes
FROM _timescaledb_catalog.chunk c
INNER JOIN _timescaledb_catalog.chunk_data_node cdn ON (cdn.chunk_id = c.id)
INNER JOIN _timescaledb_catalog.hypertable h ON (h.id = c.hypertable_id)
GROUP BY h.id, c.id, hypertable_schema, hypertable_name, chunk_schema, chunk_name
ORDER BY h.id, c.id, hypertable_schema, hypertable_name, chunk_schema, chunk_name;

GRANT SELECT ON ALL TABLES IN SCHEMA timescaledb_experimental TO PUBLIC;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE FUNCTION time_bucket_gapfill(bucket_width SMALLINT, ts SMALLINT, start SMALLINT=NULL, finish SMALLINT=NULL) RETURNS SMALLINT
	AS '$libdir/timescaledb-2.4.1', 'ts_gapfill_int16_bucket' LANGUAGE C VOLATILE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION time_bucket_gapfill(bucket_width INT, ts INT, start INT=NULL, finish INT=NULL) RETURNS INT
	AS '$libdir/timescaledb-2.4.1', 'ts_gapfill_int32_bucket' LANGUAGE C VOLATILE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION time_bucket_gapfill(bucket_width BIGINT, ts BIGINT, start BIGINT=NULL, finish BIGINT=NULL) RETURNS BIGINT
	AS '$libdir/timescaledb-2.4.1', 'ts_gapfill_int64_bucket' LANGUAGE C VOLATILE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION time_bucket_gapfill(bucket_width INTERVAL, ts DATE, start DATE=NULL, finish DATE=NULL) RETURNS DATE
	AS '$libdir/timescaledb-2.4.1', 'ts_gapfill_date_bucket' LANGUAGE C VOLATILE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION time_bucket_gapfill(bucket_width INTERVAL, ts TIMESTAMP, start TIMESTAMP=NULL, finish TIMESTAMP=NULL) RETURNS TIMESTAMP
	AS '$libdir/timescaledb-2.4.1', 'ts_gapfill_timestamp_bucket' LANGUAGE C VOLATILE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION time_bucket_gapfill(bucket_width INTERVAL, ts TIMESTAMPTZ, start TIMESTAMPTZ=NULL, finish TIMESTAMPTZ=NULL) RETURNS TIMESTAMPTZ
	AS '$libdir/timescaledb-2.4.1', 'ts_gapfill_timestamptz_bucket' LANGUAGE C VOLATILE PARALLEL SAFE;

-- locf function
CREATE OR REPLACE FUNCTION locf(value ANYELEMENT, prev ANYELEMENT=NULL, treat_null_as_missing BOOL=false) RETURNS ANYELEMENT
	AS '$libdir/timescaledb-2.4.1', 'ts_gapfill_marker' LANGUAGE C VOLATILE PARALLEL SAFE;

-- interpolate functions
CREATE OR REPLACE FUNCTION interpolate(value SMALLINT,prev RECORD=NULL,next RECORD=NULL) RETURNS SMALLINT
	AS '$libdir/timescaledb-2.4.1', 'ts_gapfill_marker' LANGUAGE C VOLATILE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION interpolate(value INT,prev RECORD=NULL,next RECORD=NULL) RETURNS INT
	AS '$libdir/timescaledb-2.4.1', 'ts_gapfill_marker' LANGUAGE C VOLATILE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION interpolate(value BIGINT,prev RECORD=NULL,next RECORD=NULL) RETURNS BIGINT
	AS '$libdir/timescaledb-2.4.1', 'ts_gapfill_marker' LANGUAGE C VOLATILE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION interpolate(value REAL,prev RECORD=NULL,next RECORD=NULL) RETURNS REAL
	AS '$libdir/timescaledb-2.4.1', 'ts_gapfill_marker' LANGUAGE C VOLATILE PARALLEL SAFE;

CREATE OR REPLACE FUNCTION interpolate(value FLOAT,prev RECORD=NULL,next RECORD=NULL) RETURNS FLOAT
	AS '$libdir/timescaledb-2.4.1', 'ts_gapfill_marker' LANGUAGE C VOLATILE PARALLEL SAFE;

-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- chunk - the OID of the chunk to be CLUSTERed
-- index - the OID of the index to be CLUSTERed on, or NULL to use the index
--         last used
CREATE OR REPLACE FUNCTION reorder_chunk(
    chunk REGCLASS,
    index REGCLASS=NULL,
    verbose BOOLEAN=FALSE
) RETURNS VOID AS '$libdir/timescaledb-2.4.1', 'ts_reorder_chunk' LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION move_chunk(
    chunk REGCLASS,
    destination_tablespace Name,
    index_destination_tablespace Name=NULL,
    reorder_index REGCLASS=NULL,
    verbose BOOLEAN=FALSE
) RETURNS VOID AS '$libdir/timescaledb-2.4.1', 'ts_move_chunk' LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION compress_chunk(
    uncompressed_chunk REGCLASS,
    if_not_compressed BOOLEAN = false
) RETURNS REGCLASS AS '$libdir/timescaledb-2.4.1', 'ts_compress_chunk' LANGUAGE C STRICT VOLATILE;

CREATE OR REPLACE FUNCTION decompress_chunk(
    uncompressed_chunk REGCLASS,
    if_compressed BOOLEAN = false
) RETURNS REGCLASS AS '$libdir/timescaledb-2.4.1', 'ts_decompress_chunk' LANGUAGE C STRICT VOLATILE;

CREATE OR REPLACE FUNCTION recompress_chunk(
    chunk REGCLASS,
    if_not_compressed BOOLEAN = false
) RETURNS REGCLASS AS '$libdir/timescaledb-2.4.1', 'ts_recompress_chunk' LANGUAGE C STRICT VOLATILE;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE FUNCTION _timescaledb_internal.partialize_agg(arg ANYELEMENT)
RETURNS BYTEA AS '$libdir/timescaledb-2.4.1', 'ts_partialize_agg' LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION _timescaledb_internal.finalize_agg_sfunc(
tstate internal, aggfn TEXT, inner_agg_collation_schema NAME, inner_agg_collation_name NAME, inner_agg_input_types NAME[][], inner_agg_serialized_state BYTEA, return_type_dummy_val ANYELEMENT)
RETURNS internal
AS '$libdir/timescaledb-2.4.1', 'ts_finalize_agg_sfunc'
LANGUAGE C IMMUTABLE ;

CREATE OR REPLACE FUNCTION _timescaledb_internal.finalize_agg_ffunc(
tstate internal, aggfn TEXT, inner_agg_collation_schema NAME, inner_agg_collation_name NAME, inner_agg_input_types NAME[][], inner_agg_serialized_state BYTEA, return_type_dummy_val ANYELEMENT)
RETURNS anyelement
AS '$libdir/timescaledb-2.4.1', 'ts_finalize_agg_ffunc'
LANGUAGE C IMMUTABLE ;

CREATE OR REPLACE AGGREGATE _timescaledb_internal.finalize_agg(agg_name TEXT,  inner_agg_collation_schema NAME,  inner_agg_collation_name NAME, inner_agg_input_types NAME[][], inner_agg_serialized_state BYTEA, return_type_dummy_val anyelement) (
    SFUNC = _timescaledb_internal.finalize_agg_sfunc,
    STYPE = internal,
    FINALFUNC = _timescaledb_internal.finalize_agg_ffunc,
    FINALFUNC_EXTRA
);
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE FUNCTION timescaledb_pre_restore() RETURNS BOOL AS
$BODY$
DECLARE
    db text;
BEGIN
    SELECT current_database() INTO db;
    EXECUTE format($$ALTER DATABASE %I SET timescaledb.restoring ='on'$$, db);
    SET SESSION timescaledb.restoring = 'on';
    PERFORM _timescaledb_internal.stop_background_workers();
    --exported uuid may be included in the dump so backup the version
    UPDATE _timescaledb_catalog.metadata SET key='exported_uuid_bak' WHERE key='exported_uuid';
    RETURN true;
END
$BODY$
LANGUAGE PLPGSQL;


CREATE OR REPLACE FUNCTION timescaledb_post_restore() RETURNS BOOL AS
$BODY$
DECLARE
    db text;
BEGIN
    SELECT current_database() INTO db;
    EXECUTE format($$ALTER DATABASE %I RESET timescaledb.restoring $$, db);
    RESET timescaledb.restoring;
    PERFORM _timescaledb_internal.restart_background_workers();

    --try to restore the backed up uuid, if the restore did not set one
    INSERT INTO _timescaledb_catalog.metadata
       SELECT 'exported_uuid', value, include_in_telemetry FROM _timescaledb_catalog.metadata WHERE key='exported_uuid_bak'
       ON CONFLICT DO NOTHING;
    DELETE FROM _timescaledb_catalog.metadata WHERE key='exported_uuid_bak';

    RETURN true;
END
$BODY$
LANGUAGE PLPGSQL;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE FUNCTION add_job(
  proc REGPROC,
  schedule_interval INTERVAL,
  config JSONB DEFAULT NULL,
  initial_start TIMESTAMPTZ DEFAULT NULL,
  scheduled BOOL DEFAULT true
) RETURNS INTEGER AS '$libdir/timescaledb-2.4.1', 'ts_job_add' LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION delete_job(job_id INTEGER) RETURNS VOID AS '$libdir/timescaledb-2.4.1', 'ts_job_delete' LANGUAGE C VOLATILE STRICT;
CREATE OR REPLACE PROCEDURE run_job(job_id INTEGER) AS '$libdir/timescaledb-2.4.1', 'ts_job_run' LANGUAGE C;

-- Returns the updated job schedule values
CREATE OR REPLACE FUNCTION alter_job(
    job_id INTEGER,
    schedule_interval INTERVAL = NULL,
    max_runtime INTERVAL = NULL,
    max_retries INTEGER = NULL,
    retry_period INTERVAL = NULL,
    scheduled BOOL = NULL,
    config JSONB = NULL,
    next_start TIMESTAMPTZ = NULL,
    if_exists BOOL = FALSE
)
RETURNS TABLE (job_id INTEGER, schedule_interval INTERVAL, max_runtime INTERVAL, max_retries INTEGER, retry_period INTERVAL, scheduled BOOL, config JSONB, next_start TIMESTAMPTZ)
AS '$libdir/timescaledb-2.4.1', 'ts_job_alter'
LANGUAGE C VOLATILE;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

-- Add a retention policy to a hypertable or continuous aggregate.
-- The retention_window (typically an INTERVAL) determines the
-- window beyond which data is dropped at the time
-- of execution of the policy (e.g., '1 week'). Note that the retention
-- window will always align with chunk boundaries, thus the window
-- might be larger than the given one, but never smaller. In other
-- words, some data beyond the retention window
-- might be kept, but data within the window will never be deleted.
CREATE OR REPLACE FUNCTION add_retention_policy(
       relation REGCLASS,
       drop_after "any",
       if_not_exists BOOL = false
)
RETURNS INTEGER AS '$libdir/timescaledb-2.4.1', 'ts_policy_retention_add'
LANGUAGE C VOLATILE STRICT;

CREATE OR REPLACE FUNCTION remove_retention_policy(
    relation REGCLASS,
    if_exists BOOL = false
) RETURNS VOID
AS '$libdir/timescaledb-2.4.1', 'ts_policy_retention_remove'
LANGUAGE C VOLATILE STRICT;

/* reorder policy */
CREATE OR REPLACE FUNCTION add_reorder_policy(hypertable REGCLASS, index_name NAME, if_not_exists BOOL = false) RETURNS INTEGER
AS '$libdir/timescaledb-2.4.1', 'ts_policy_reorder_add'
LANGUAGE C VOLATILE STRICT;

CREATE OR REPLACE FUNCTION remove_reorder_policy(hypertable REGCLASS, if_exists BOOL = false) RETURNS VOID
AS '$libdir/timescaledb-2.4.1', 'ts_policy_reorder_remove'
LANGUAGE C VOLATILE STRICT;

/* compression policy */
CREATE OR REPLACE FUNCTION add_compression_policy(hypertable REGCLASS, compress_after "any", if_not_exists BOOL = false)
RETURNS INTEGER
AS '$libdir/timescaledb-2.4.1', 'ts_policy_compression_add'
LANGUAGE C VOLATILE STRICT;

CREATE OR REPLACE FUNCTION remove_compression_policy(hypertable REGCLASS, if_exists BOOL = false) RETURNS BOOL
AS '$libdir/timescaledb-2.4.1', 'ts_policy_compression_remove'
LANGUAGE C VOLATILE STRICT;

/* continuous aggregates policy */
CREATE OR REPLACE FUNCTION add_continuous_aggregate_policy(continuous_aggregate REGCLASS, start_offset "any", end_offset "any", schedule_interval INTERVAL, if_not_exists BOOL = false)
RETURNS INTEGER
AS '$libdir/timescaledb-2.4.1', 'ts_policy_refresh_cagg_add'
LANGUAGE C VOLATILE;

CREATE OR REPLACE FUNCTION remove_continuous_aggregate_policy(continuous_aggregate REGCLASS, if_not_exists BOOL = false)
RETURNS VOID
AS '$libdir/timescaledb-2.4.1', 'ts_policy_refresh_cagg_remove'
LANGUAGE C VOLATILE STRICT;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

CREATE OR REPLACE PROCEDURE _timescaledb_internal.policy_retention(job_id INTEGER, config JSONB)
AS '$libdir/timescaledb-2.4.1', 'ts_policy_retention_proc'
LANGUAGE C;

CREATE OR REPLACE PROCEDURE _timescaledb_internal.policy_reorder(job_id INTEGER, config JSONB)
AS '$libdir/timescaledb-2.4.1', 'ts_policy_reorder_proc'
LANGUAGE C;

CREATE OR REPLACE PROCEDURE _timescaledb_internal.policy_compression(job_id INTEGER, config JSONB)
AS '$libdir/timescaledb-2.4.1', 'ts_policy_compression_proc'
LANGUAGE C;

CREATE OR REPLACE PROCEDURE _timescaledb_internal.policy_recompression(job_id INTEGER, config JSONB)
AS '$libdir/timescaledb-2.4.1', 'ts_policy_recompression_proc'
LANGUAGE C;

CREATE OR REPLACE PROCEDURE _timescaledb_internal.policy_refresh_continuous_aggregate(job_id INTEGER, config JSONB)
AS '$libdir/timescaledb-2.4.1', 'ts_policy_refresh_cagg_proc'
LANGUAGE C;
-- This file and its contents are licensed under the Apache License 2.0.
-- Please see the included NOTICE for copyright information and
-- LICENSE-APACHE for a copy of the license.

DO language plpgsql $$
DECLARE
  telemetry_string TEXT;
BEGIN
  IF current_setting('timescaledb.telemetry_level') = 'off'
  THEN
    telemetry_string = E'Note: Please enable telemetry to help us improve our product by running: ALTER DATABASE "' || current_database() || E'" SET timescaledb.telemetry_level = ''basic'';';
  ELSE
    telemetry_string = E'Note: TimescaleDB collects anonymous reports to better understand and assist our users.\nFor more information and how to disable, please see our docs https://docs.timescale.com/timescaledb/latest/how-to-guides/configuration/telemetry.';
  END IF;

  RAISE WARNING E'%\n%\n',
    E'\nWELCOME TO\n' ||
    E' _____ _                               _     ____________  \n' ||
    E'|_   _(_)                             | |    |  _  \\ ___ \\ \n' ||
    E'  | |  _ _ __ ___   ___  ___  ___ __ _| | ___| | | | |_/ / \n' ||
    '  | | | |  _ ` _ \ / _ \/ __|/ __/ _` | |/ _ \ | | | ___ \ ' || E'\n' ||
    '  | | | | | | | | |  __/\__ \ (_| (_| | |  __/ |/ /| |_/ /' || E'\n' ||
    '  |_| |_|_| |_| |_|\___||___/\___\__,_|_|\___|___/ \____/' || E'\n' ||
    E'               Running version ' || '2.4.1' || E'\n' ||

    E'For more information on TimescaleDB, please visit the following links:\n\n'
    ||
    E' 1. Getting started: https://docs.timescale.com/timescaledb/latest/getting-started\n' ||
    E' 2. API reference documentation: https://docs.timescale.com/api/latest\n' ||
    E' 3. How TimescaleDB is designed: https://docs.timescale.com/timescaledb/latest/overview/core-concepts\n',
    telemetry_string;
END;
$$;
