/* $NetBSD: atphy.c,v 1.22.4.2 2020/03/19 19:21:37 martin Exp $ */ /* $OpenBSD: atphy.c,v 1.1 2008/09/25 20:47:16 brad Exp $ */ /*- * Copyright (c) 2008, Pyun YongHyeon * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Driver for the Attansic F1 10/100/1000 PHY. */ #include __KERNEL_RCSID(0, "$NetBSD: atphy.c,v 1.22.4.2 2020/03/19 19:21:37 martin Exp $"); #include #include #include #include #include #include #include #include #include #include /* Special Control Register */ #define ATPHY_SCR 0x10 #define ATPHY_SCR_JABBER_DISABLE 0x0001 #define ATPHY_SCR_POLARITY_REVERSAL 0x0002 #define ATPHY_SCR_SQE_TEST 0x0004 #define ATPHY_SCR_MAC_PDOWN 0x0008 #define ATPHY_SCR_CLK125_DISABLE 0x0010 #define ATPHY_SCR_MDI_MANUAL_MODE 0x0000 #define ATPHY_SCR_MDIX_MANUAL_MODE 0x0020 #define ATPHY_SCR_AUTO_X_1000T 0x0040 #define ATPHY_SCR_AUTO_X_MODE 0x0060 #define ATPHY_SCR_10BT_EXT_ENABLE 0x0080 #define ATPHY_SCR_MII_5BIT_ENABLE 0x0100 #define ATPHY_SCR_SCRAMBLER_DISABLE 0x0200 #define ATPHY_SCR_FORCE_LINK_GOOD 0x0400 #define ATPHY_SCR_ASSERT_CRS_ON_TX 0x0800 /* Special Status Register. */ #define ATPHY_SSR 0x11 #define ATPHY_SSR_SPD_DPLX_RESOLVED 0x0800 #define ATPHY_SSR_DUPLEX 0x2000 #define ATPHY_SSR_SPEED_MASK 0xC000 #define ATPHY_SSR_10MBS 0x0000 #define ATPHY_SSR_100MBS 0x4000 #define ATPHY_SSR_1000MBS 0x8000 static int atphy_match(device_t, cfdata_t, void *); static void atphy_attach(device_t, device_t, void *); static int atphy_service(struct mii_softc *, struct mii_data *, int); static void atphy_reset(struct mii_softc *); static void atphy_status(struct mii_softc *); static int atphy_mii_phy_auto(struct mii_softc *); static bool atphy_is_gige(const struct mii_phydesc *); CFATTACH_DECL_NEW(atphy, sizeof(struct mii_softc), atphy_match, atphy_attach, mii_phy_detach, mii_phy_activate); const struct mii_phy_funcs atphy_funcs = { atphy_service, atphy_status, atphy_reset, }; static const struct mii_phydesc atphys[] = { MII_PHY_DESC(ATTANSIC, L1), MII_PHY_DESC(ATTANSIC, L2), MII_PHY_DESC(ATTANSIC, AR8021), MII_PHY_DESC(ATTANSIC, AR8035), MII_PHY_END, }; static bool atphy_is_gige(const struct mii_phydesc *mpd) { switch (mpd->mpd_oui) { case MII_OUI_ATTANSIC: switch (mpd->mpd_model) { case MII_MODEL_ATTANSIC_L2: return false; } } return true; } static int atphy_match(device_t parent, cfdata_t match, void *aux) { struct mii_attach_args *ma = aux; if (mii_phy_match(ma, atphys) != NULL) return 10; return 0; } void atphy_attach(device_t parent, device_t self, void *aux) { struct mii_softc *sc = device_private(self); struct mii_attach_args *ma = aux; struct mii_data *mii = ma->mii_data; const struct mii_phydesc *mpd; uint16_t bmsr; mpd = mii_phy_match(ma, atphys); aprint_naive(": Media interface\n"); aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2)); sc->mii_dev = self; sc->mii_inst = mii->mii_instance; sc->mii_phy = ma->mii_phyno; sc->mii_mpd_oui = MII_OUI(ma->mii_id1, ma->mii_id2); sc->mii_mpd_model = MII_MODEL(ma->mii_id2); sc->mii_mpd_rev = MII_REV(ma->mii_id2); sc->mii_funcs = &atphy_funcs; sc->mii_pdata = mii; sc->mii_flags = ma->mii_flags; if (atphy_is_gige(mpd)) sc->mii_anegticks = MII_ANEGTICKS_GIGE; else sc->mii_anegticks = MII_ANEGTICKS; sc->mii_flags |= MIIF_NOLOOP; PHY_RESET(sc); PHY_READ(sc, MII_BMSR, &bmsr); PHY_READ(sc, MII_BMSR, &bmsr); sc->mii_capabilities = bmsr & ma->mii_capmask; if (atphy_is_gige(mpd) && (sc->mii_capabilities & BMSR_EXTSTAT)) PHY_READ(sc, MII_EXTSR, &sc->mii_extcapabilities); aprint_normal_dev(self, ""); mii_phy_add_media(sc); aprint_normal("\n"); } int atphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) { struct ifmedia_entry *ife = mii->mii_media.ifm_cur; uint16_t anar, bmcr, bmsr; switch (cmd) { case MII_POLLSTAT: /* If we're not polling our PHY instance, just return. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) return 0; break; case MII_MEDIACHG: /* * If the media indicates a different PHY instance, * isolate ourselves. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) { PHY_READ(sc, MII_BMCR, &bmcr); PHY_WRITE(sc, MII_BMCR, bmcr | BMCR_ISO); return 0; } /* If the interface is not up, don't do anything. */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) break; bmcr = 0; switch (IFM_SUBTYPE(ife->ifm_media)) { case IFM_AUTO: case IFM_1000_T: atphy_mii_phy_auto(sc); goto done; case IFM_100_TX: bmcr = BMCR_S100; break; case IFM_10_T: bmcr = BMCR_S10; break; case IFM_NONE: PHY_READ(sc, MII_BMCR, &bmcr); /* * XXX * Due to an unknown reason powering down PHY resulted * in unexpected results such as inaccessibility of * hardware of freshly rebooted system. Disable * powering down PHY until I got more information for * Attansic/Atheros PHY hardwares. */ PHY_WRITE(sc, MII_BMCR, bmcr | BMCR_ISO); goto done; default: return EINVAL; } anar = mii_anar(ife); if ((ife->ifm_media & IFM_FDX) != 0) { bmcr |= BMCR_FDX; /* Enable pause. */ if (sc->mii_flags & MIIF_DOPAUSE) anar |= ANAR_PAUSE_TOWARDS; } if ((sc->mii_extcapabilities & (EXTSR_1000TFDX | EXTSR_1000THDX)) != 0) PHY_WRITE(sc, MII_100T2CR, 0); PHY_WRITE(sc, MII_ANAR, anar); /* Start autonegotiation. */ PHY_WRITE(sc, MII_BMCR, bmcr | BMCR_AUTOEN | BMCR_STARTNEG); done: break; case MII_TICK: /* If we're not currently selected, just return. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) return 0; /* Is the interface even up? */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) return 0; /* Only used for autonegotiation. */ if ((IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) && (IFM_SUBTYPE(ife->ifm_media) != IFM_1000_T)) { sc->mii_ticks = 0; break; } /* * Check for link. * Read the status register twice; BMSR_LINK is latch-low. */ PHY_READ(sc, MII_BMSR, &bmsr); PHY_READ(sc, MII_BMSR, &bmsr); if (bmsr & BMSR_LINK) { sc->mii_ticks = 0; break; } /* Announce link loss right after it happens. */ if (sc->mii_ticks++ == 0) break; /* Only retry autonegotiation every mii_anegticks seconds. */ if (sc->mii_ticks <= sc->mii_anegticks) break; atphy_mii_phy_auto(sc); break; } /* Update the media status. */ mii_phy_status(sc); /* Callback if something changed. */ mii_phy_update(sc, cmd); return 0; } static void atphy_status(struct mii_softc *sc) { struct mii_data *mii = sc->mii_pdata; uint16_t bmsr, bmcr, gsr, ssr; mii->mii_media_status = IFM_AVALID; mii->mii_media_active = IFM_ETHER; PHY_READ(sc, MII_BMSR, &bmsr); PHY_READ(sc, MII_BMSR, &bmsr); if (bmsr & BMSR_LINK) mii->mii_media_status |= IFM_ACTIVE; PHY_READ(sc, MII_BMCR, &bmcr); if (bmcr & BMCR_ISO) { mii->mii_media_active |= IFM_NONE; mii->mii_media_status = 0; return; } if (bmcr & BMCR_LOOP) mii->mii_media_active |= IFM_LOOP; PHY_READ(sc, ATPHY_SSR, &ssr); if (!(ssr & ATPHY_SSR_SPD_DPLX_RESOLVED)) { /* Erg, still trying, I guess... */ mii->mii_media_active |= IFM_NONE; return; } switch (ssr & ATPHY_SSR_SPEED_MASK) { case ATPHY_SSR_1000MBS: mii->mii_media_active |= IFM_1000_T; /* * atphy(4) has a valid link so reset mii_ticks. * Resetting mii_ticks is needed in order to * detect link loss after auto-negotiation. */ sc->mii_ticks = 0; break; case ATPHY_SSR_100MBS: mii->mii_media_active |= IFM_100_TX; sc->mii_ticks = 0; break; case ATPHY_SSR_10MBS: mii->mii_media_active |= IFM_10_T; sc->mii_ticks = 0; break; default: mii->mii_media_active |= IFM_NONE; return; } if (ssr & ATPHY_SSR_DUPLEX) mii->mii_media_active |= IFM_FDX | mii_phy_flowstatus(sc); else mii->mii_media_active |= IFM_HDX; PHY_READ(sc, MII_100T2SR, &gsr); if ((IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) && gsr & GTSR_MS_RES) mii->mii_media_active |= IFM_ETH_MASTER; } static void atphy_reset(struct mii_softc *sc) { uint16_t reg; int i; /* * Take PHY out of power down mode. * * XXX AR8021 document has no description about the power saving * control register. Shouldn't we write it? */ PHY_WRITE(sc, 29, 0x29); /* * XXX AR8031 document says the lower 14 bits are reserved and the * default value is 0x36d0. Shouldn't we clear those bits? * I have no document neither L1(F1) nor L2(F2). */ PHY_WRITE(sc, 30, 0); if ((sc->mii_mpd_model == MII_MODEL_ATTANSIC_L2) && (sc->mii_mpd_rev == 1)) { /* * On NVIDIA MCP61 with Attansic L2 rev. 1, changing debug * port 0x29's value makes the next PHY read fail with error. * This is observed on ASUS M2N-MX SE Plus. Read any register * to ignore this problem. */ (void)PHY_READ(sc, ATPHY_SCR, ®); } PHY_READ(sc, ATPHY_SCR, ®); /* Enable automatic crossover. */ reg |= ATPHY_SCR_AUTO_X_MODE; /* Disable power down. */ reg &= ~ATPHY_SCR_MAC_PDOWN; /* Enable CRS on Tx. */ reg |= ATPHY_SCR_ASSERT_CRS_ON_TX; /* Auto correction for reversed cable polarity. */ reg |= ATPHY_SCR_POLARITY_REVERSAL; PHY_WRITE(sc, ATPHY_SCR, reg); atphy_mii_phy_auto(sc); /* Workaround F1 bug to reset phy. */ PHY_READ(sc, MII_BMCR, ®); reg |= BMCR_RESET; PHY_WRITE(sc, MII_BMCR, reg); for (i = 0; i < 1000; i++) { DELAY(1); PHY_READ(sc, MII_BMCR, ®); if ((reg & BMCR_RESET) == 0) break; } } static int atphy_mii_phy_auto(struct mii_softc *sc) { uint16_t anar; sc->mii_ticks = 0; anar = BMSR_MEDIA_TO_ANAR(sc->mii_capabilities) | ANAR_CSMA; if (sc->mii_flags & MIIF_DOPAUSE) anar |= ANAR_PAUSE_TOWARDS; PHY_WRITE(sc, MII_ANAR, anar); if (sc->mii_extcapabilities & (EXTSR_1000TFDX | EXTSR_1000THDX)) PHY_WRITE(sc, MII_100T2CR, GTCR_ADV_1000TFDX | GTCR_ADV_1000THDX); PHY_WRITE(sc, MII_BMCR, BMCR_AUTOEN | BMCR_STARTNEG); return EJUSTRETURN; }