SFROTZ(6)

NAME
sfrotz - interpreter for Infocom and other Z-Machine games (SDL interface)

SYNOPSIS
sfrotz [options] file [blorb_file] At least one file must be specified on the command line. This can be either a plain Z-code file or a Blorb file. A Z-code file is a compiled executable for the Z-Machine. A Blorb file contains audio, graphics, and other things in addition to the game wrapped up into a single file. It can also optionally contain the Z-Machine executable. If a plain Z-code file is supplied, then Frotz will check for a Blorb file with the same base name but an extension of .blb, .blorb, or .zblorb and load it if found. If the file supplied on the command line is a Blorb file, then Frotz will check to see if a Z-code file is contained within. If not found, then Frotz will complain and exit. An alternatively-named Blorb file can be supplied as the optional second parameter to the command line invocatio

DESCRIPTION
Frotz is a Z-Machine interpreter. The Z-machine is a virtual machine designed by Infocom to run all of their text adventures. It went through multiple revisions during the lifetime of the company, and two further revisions (V7 and V8) were created by Graham Nelson after the company's demise. The specification is now quite well documented; this version of Frotz supports version 1.0.

This version of Frotz fully supports all these versions of the Z-Machine including the graphical version 6. Graphics and sound are created through the use of the SDL libraries. AIFF sound effects and music in MOD and OGG formats are supported when packaged in Blorb container files or optionally from individual files.

STANDARD OPTIONS

-a  Watch attribute setting. Setting and clearing of attributes on objects will be noted in debugging messages.

-A  Watch attribute testing. Every time the Z-machine tests an attribute value, the test and the result will be reported.

-b <colorname>
    Sets the default background color. <colorname> corresponds to one of the Z-machine colors, which are as follows:
    black red green yellow blue magenta cyan white
    If color support is disabled or not available on your terminal, this option does nothing.

-c N
    Sets the number of context lines used. By default, after a ``[MORE]'' prompt, and assuming there is enough output pending, Frotz will allow all the currently visible lines to scroll off the screen before prompting again. This switch specifies how many lines of text Frotz will hold over and display at the top of the next screen.

-d  Disable color.

-f <colorname>
    Sets the default foreground color. <colorname> corresponds to one of the Z-machine colors, which are as follows
    black red green yellow blue magenta cyan white
    If color support is disabled or is not available on your terminal, this option does nothing.

-h N
    Manually sets the text height.

-i  Ignore fatal errors. If a Z-Machine interpreter encounters a zcode error such as division-by-zero or addressing an illegal object, the proper response is to abort execution. This is done because the zcode program doesn't have a clear idea of what is going on. There are some games out there that cause fatal errors because the authors were careless and used an interpreter that didn't properly check for errors. This option is intended to get around such bugs, but be warned that Strange Things may happen if fatal errors are not caught.

-I N
    Set the interpreter number. Infocom designed the Z-machine such that a game could tell on what kind of machine the interpreter was running. See INTERPRETER NUMBER below.

-l N
    Sets the left margin, for those who might have specific formatting needs.

-L <filename>
    When the game starts, load this saved game file.

-o  Watch object movement. This option enables debugging messages from the interpreter which describe the moving of objects in the object tree.

-O  Watch object location. These debugging messages detail the locations of objects in the object tree.

-P  Alter the piracy opcode. The piracy opcode was never used by Infocom. This switch is really only useful for those who like to toy around with Z-code.

-r N
    Sets the right margin.

-s N
    Set the random number seed value. The given seed value is used as the initial seed value on every restart. This is helpful for testing games like Curses which make random decisions before the first input (such that the hot key Alt-S does not really help).

-S N
    Set the transcript width. By default your transcript files are formatted to a width of 80 columns per line, regardless of the current text width. This switch allows you to change this setting. In particular, use -S 0 to deactivate automatic line splitting in transcript files.

-t  Sets the Z-machine's Tandy bit, which may affect the behavior of certain Infocom games. For example, Zork I pretends not to have sequels, and Witness has its language toned down.

-u N
    Sets the number of slots available for Frotz's multiple undo hotkey (see below). This defaults to twenty, which should be sufficient for most purposes. Setting too high a number here may be dangerous on machines with limited memory.

-w N
    Manually sets the text width.

-x  Expand the abbreviations "g", "x", and "z" to "again", "examine", and "wait". This switch is for use with old Infocom games that lack these common abbreviations which were introduced in later games. Use it with caution: A few games might use "g", "x" or "z" for different purposes.

-Z N
    Error checking mode.
    0 = don't report errors.
    1 = report first instance of an error.
    2 = report all errors.
    3 = exit after any error.
    Default is 1 (report first instance of an error).

EXTENDED OPTIONS

-@ <listfile>
    Use resource files listed in <listfile> (see NON BLORB RESOURCES).

-%  Use local resource files.

-F  Run in fullscreen mode (see NOTES).

-m <msecs>
    Set the timer interrupt cycle to <msecs> milliseconds, instead of the default 100 (1/10 sec).

-N <mode>
    Set the mode (date or name) for creating default file names for save/script etc. For date, a timestamp is prepended to the filename extension. For name, a four-digit number beginning with 0000 is prepended to the filename extension.

-T  Use traditional in-game requests for file names, intead of on-screen dialogs. -v Show version information and exit. This will display the version of Frotz, some information about what's enabled and what's not, the commit date of the source code, and a git(1) hash of that commit.

-V  Force the use of default monospaced VGA font.

HOT KEYS
Sfrotz supports the same hot keys as standard Frotz, plus the Ctl-Alt-X combination for immediate exit, which may be used in case of emergency. Note that these hot keys are enabled only when the Z-machine is waiting for line input (for Z-machine experts: @read opcode), with the exception of Ctl-Alt-X which also works in single character input mode (@read_char opcode).

Alt-D
    Set debugging options.

Alt-H
    Help (print the list of hot keys).

Alt-N
    New game (restart).

Alt-P
    Playback on.

Alt-R
    Recording on/off.

Alt-S
    Set random number seed.

Alt-U
    Undo one turn.

Alt-X
    Exit game (after confirmation).

Ctl-Alt-X
    Exit game immediately (no confirmation).

WINDOW
Sfrotz has a hardwired default screen size of 640x400. The screen size can be changed by the values in this section, by the values found in the Reso chunck of a Blorb file, and finally by the -w and -h command line options (in that order). Note however that Sfrotz shall refuse to set a screen width less than 640 and/or a height less than 400. NOTE: for normal (windowed) usage, the screen size should obviously be less than the PC screen resolution (taking into account also window decorations, taskbars etc.) For fullscreen usage, the size should preferably be one of those supported by the PC video driver; otherwise, SDL shall try to use the next higher available resolution, with black borders around the Z-machine screen. In fullscreen mode, however, it may happen that for some strange resolutions SDL accepts the request, but the screen goes blank... In such a case, you may shut down the program by pressing Ctrl-Alt-X.

INTERPRETER NUMBER
The interpreter number is a setting in the Z-machine header which is used to tell the game on what sort of machine the interpreter is running. Sfrotz will automatically choose the most appropriate number for a given Infocom-produced game. Should you want to override the number, the -I option is available. An interpreter should choose the interpreter number most suitable for the machine it will run on. In Versions up to 5, the main consideration is that the behaviour of 'Beyond Zork' depends on the interpreter number (in terms of its usage of the character graphics font). In Version 6, the decision is more serious, as existing Infocom story files depend on interpreter number in many ways: moreover, some story files expect to be run only on the interpreters for a particular machine. There are, for instance, specifically Amiga versions. The DECSystem-20 was Infocom's own in-house mainframe. For Infocom's four V6 games, the interpreter number will be automatically chosen based on the title and release number. Of course, this can be overridden at the command line. Infocom used the following interpreter numbers:

1 DECSystem 20

2 Apple IIe

3 Macintosh

4 Amiga

5 Atari ST

6 IBM PC

7 Commodore128

8 Commodore64

9 Apple IIc

10 Apple IIgs

11 Tandy Color

NON BLORB RESOURCES
Besides Blorb-packaged resources, Sfrotz can also render graphics and sound from individual files, provided the latter are either suitably named (e.g a common root with a numeric field specifying the resource number), or listed in a suitably formatted text file. Note that this feature is not automatic, but must be enabled by the -% or -@ command line options. When the feature is enabled, resources found this way override those in the Blorb file, if present. This feature can be useful to game designers, as it eases changing and adding resources without having to re-compile the Blorb file each time. The format of the list file used with the -@ option (see EXAMPLE BLC FILE) is identical to that of the BLC control file used by L. Ross Raszewski's iblorb package, so one can use the same list for compiling the final Blorb file for distribution.

TRUETYPE FONTS
Sfrotz can display text with Truetype or Type1 fonts, using the FreeType2 rendering library. The location of the necessary font files must be specified in the setup file. Also, antialiased rendering of Truetype fonts can be specified. Please note that this feature in sfrotz is still experimental, so don't expect too much (e.g., kerning is not supported).

DEFAULT FONTS
Sfrotz does not need Truetype fonts to work; in fact it has a default monospaced font, based on an 8x16 VGA font, which can be used for both the TEXT_FONT and the FIXED_FONT of the z-machine, with suitable (though not very nice) modifications for the various styles. Even if Truetype fonts are specified in the setup file, Sfrotz can be forced to use the VGA font by the -V command line switch.

UNICODE
Sfrotz supports Unicode glyphs by way of UTF-8 as long as the fonts loaded contain the glyphs you need. The default font provided by SDL does not contain much beyond the Latin alphabet and some diacritical marks. Inverted punctuation marks as used in Spanish are missing. Two monospaced fonts known to work well with most commonly-encountered alphabetic languages are Leggie and FreeMono. They can be found at https://memleek.org/leggie/ (X11 BDF fonts) and https://www.gnu.org/software/freefont/ (Truetype fonts). Logographic glyphs (Kanji and Chinese are not currently supported.

ENVIRONMENT
If the ZCODE_PATH environmental variable is defined, Sfrotz will search that path for game files. If that doesn't exist, INFOCOM_PATH will be searched.

SETUP FILE
On startup, sfrotz will check $HOME/.sfrotzrc for setup information. The setup file has four sections: Interpreter, Display, Fonts, and Resources. The Interpreter section deals with options having to do with how the Frotz core works. The Window section deals with screen display. Sfrotz has a hardwired default screen size of 640x400. The screen size can be changed by the values in this section, by the values found in the Reso chunck of a Blorb file, and finally by the -w and -h command line options (in that order). Note however that sfrotz shall refuse to set a screen width less than 640 and/or a height less than 400. NOTE: for normal (windowed) usage, the screen size should obviously be less than the PC screen resolution (taking into account also window decorations, taskbars etc.) For fullscreen usage, the size should preferably be one of those supported by the PC video driver; otherwise, SDL shall try to use the next higher available resolution, with black borders around the z-machine screen. In fullscreen mode, however, it may happen that for some strange resolutions SDL accepts the request, but the screen goes blank... In such a case, you may shut down the program by pressing Ctrl-Alt-X. The Display section is reserved for future developments. The Fonts section is for defining the font directory, font files, and if antialiasing is enabled (which is currently not supported). The following eight statements: textroman, textbold, textitalic, textbolditalic, fixedroman, fixedbold, fixeditalic, and fixedbolditalic; specify the eight font faces used by the z-machine (not counting the so-called graphics font used in Beyond Zork, which is hardwired in the program), that is the normal TEXT_FONT and the monospaced FIXED_FONT, each in four styles (roman, bold, italic and bold+italic). A single face is specified by the file name (with its suffix!), optionally followed by an @ sign and a number, indicating the font size in pixels (default is 14). Multiple face files can be specified, separated by pipe (|) characters; Sfrotz shall use the first one it finds (see the example in EXAMPLE SETUP FILE). This feature allows e.g. to use the same setup file on different systems. The Resources section is for configuring graphics and sound resources. Each template must contain exactly one C-style decimal format specifier (e.g. Pict%d) to be substituted by the resource number.

SETUP FILE GRAMMAR
[Interpreter]

Number = number
Set the interpreter number (default is 4, i.e. Amiga Interpreter)

Error Reporting = level
Set the error reporting level (same as the -Z option)

Ignore Errors = 0/1
Ignore (1) or not (0) non-fatal runtime errors.

Expand Abbreviations = 0/1
Set/reset expansion of g/x/z abbreviations. Expansion is useful for old v1 games which do not understand such abbreviations. Default: 0 (the -xoption can set this switch.)

Tandy Bit = 0/1
Set/reset the Tandy bit. Default: 0 (the -t option can set this switch.)

Wrap Script Lines = nc
Set the width (number of columns) of the transcript to nc. Same as -S option.

SaveNames = date/name
Set the mode (date or name) for creating default file names for save/script etc. For date, a timestamp is prepended to the filename extension. For name, a four-digit number beginning with 0000 is prepended to the filename extension.

[Window]

AcWidth = width
Set the screen width in pixels (default: 640)

AcHeight = height
Set the screen height in pixels (default: 400)

[Display]

(This section reserved for future developments)

[Fonts]

antialias = 0/1
Set antialiased rendering of Truetype fonts off (0) or on (nonzero). Note that this option cannot be overridden by a command line switch.

fontdir = folder
Specify the directory containing the Truetype fonts. If this does not begin with a slash, then the directory is assumed to be relative to the user's home directory.

textroman = fontspec
Set the font file for TEXT_FONT, roman style.

textbold = fontspec
Set the font file for TEXT_FONT, bold style.

textitalic = fontspec
Set the font file for TEXT_FONT, italic style.

textbolditalic = fontspec

fixedroman = fontspec
Set the font file for FIXED_FONT, roman style.

fixedbold = fontspec
Set the font file for FIXED_FONT, bold style.

fixeditalic = fontspec
Set the font file for FIXED_FONT, italic style.

fixedbolditalic = fontspec
Set the font file for FIXED_FONT, bold and italic style

[Resources]

Dir = folder
Specify the folder for individual graphics/sound resource files.

Pict = template
Template for picture resource files.

Snd = template
Template for sound resource files.

EXAMPLE SETUP FILE
# The # denotes the start of a comment
# Everything after the # is ignored, up to the end of the line [Interpreter]
SaveNames=date [Window]
# The following entries are commented out
# but they are the same as the hardwired defaults, anyway
#AcWidth = 640
#AcHeight = 400 [Display] [Fonts]
antialias=1
fontdir=/usr/share/fonts/truetype/freefont
textroman=arial.ttf@16|FreeSans.ttf@16
textbold=arialbd.ttf@16|FreeSansBold.ttf@16
textitalic=ariali.ttf@16|FreeSansOblique.ttf@16
textbolditalic=arialbi.ttf@16|FreeSansBoldOblique.ttf@16
fixedroman=cour.ttf@16|FreeMono.ttf@16
fixedbold=courbd.ttf@16|FreeMonoBold.ttf@16
fixeditalic=couri.ttf@16|FreeMonoOblique.ttf@16
fixedbolditalic=courbi.ttf@16|FreeMonoBoldOblique.ttf@16 [Resources]
Dir=./ # the current dir
Pict=PIC%d # i.e. PIC1, PIC2, ...
Snd=SND%d # i.e. SND3, SND4, ...

EXAMPLE BLC FILE
Exec 0 ZCOD ani.z6 Snd 13 FORM busyalone.au.aiff
Snd 12 FORM s0020.au.aiff
Snd 11 FORM s0154.au.aiff
Snd 10 FORM s1484.au.aiff Pict 10 PNG edleft.png0.png
Pict 11 PNG edleft.png1.png
Pict 12 PNG edleft.png2.png
Pict 13 PNG edleft.png3.png
Pict 14 PNG edleft.png4.png
Pict 15 PNG edleft.png5.png Pict 16 PNG lauhoh.png0.png
Pict 17 PNG lauhoh.png1.png
Pict 18 PNG lauhoh.png2.png Pict 19 PNG edfront.png0.png
Pict 20 PNG edfront.png1.png
Pict 21 PNG edfront.png2.png
Pict 22 PNG edfront.png3.png
Pict 23 PNG edfront.png4.png
Pict 24 PNG edfront.png5.png Pict 25 PNG hoagie.png0.png
Pict 26 PNG hoagie.png1.png Pict 30 PNG dott0.png

FURTHER INFORMATION

The Frotz homepage is at https://661.org/proj/if/frotz/.

A git(1) repository of all versions of Unix Frotz back to 2.32 is available for public perusal here:
https://gitlab.com/DavidGriffith/frotz/.

The bleeding edge of Frotz development may be followed there.

The Interactive Fiction Archive is a good place to find games to play with Frotz. Various ports and builds for Frotz may also be found here. Here is its URL:
http://www.ifarchive.org/

Most distributions of Linux and BSD include Frotz in their package repositories.
It is distributed under the GNU General Public License version 2 or (at your option) any later version.
https://www.gnu.org/licenses/gpl-2.0.en.html
This software is offered as-is with no warranty or liability. If you find a bug or would like Frotz to do something it doesn't currently do, please visit the above Gitlab website and report your concerns.

CAVEATS

The Z Machine itself has trouble with the concept of resizing a terminal. It assumes that once the screen height and width are set, they will never change; even across saves. This made sense when 24x80 terminals were the norm and graphical user interfaces were mostly unknown. I'm fairly sure there's a way around this problem, but for now, don't resize an xterm in which frotz is running. Also, you should try to make sure the terminal on which you restore a saved game has the same dimensions as the one on which you saved the game.

Audio latency might be unreasonably long depending on the settings of your operating system. Linux generally has things right. The BSDs may need some sysctl(8) settings adjusted. See the sound(4) or audio(4) manpages for more information.

This manpage is not intended to tell users HOW to play interactive fiction. Refer to the file HOW_TO_PLAY included in the Unix Frotz documentation or visit one of the following sites:
http://www.microheaven.com/ifguide/
http://www.brasslantern.org/beginners/
http://www.musicwords.net/if/how_to_play.htm
http://ifarchive.org/

BUGS
This program has no bugs. no bugs. no bugs. no *WHAP* thank you. If you find one, please report it to the Gitlab site referenced above in FURTHER INFORMATION.

AUTHORS
frotz was written by Stefan Jokisch for MSDOS in 1995-7.
The SDL port was done in 2009 by Aldo Cumani and is currently maintained by David Griffith <dave@661.org>.

SEE ALSO
frotz(6) dfrotz(6) nitfol(6) rezrov(6) jzip(6) xzip(6) inform(1)