![]() |
Welcome to ftp.nluug.nl Current directory: /NetBSD/NetBSD-release-9/xsrc/external/mit/xf86-video-tga/dist/ |
|
Contents of README:Information for DEC 21030 Users (aka TGA) The XFree86 Project, Inc. Updates for X11R7.5 by Jim Gettys March 25th, 2004 ____________________________________________________________ Table of Contents 1. DEC 21030 2. Authors ______________________________________________________________________ 1. DEC 21030 o The DEC 21030 is supported by X11R7.5. The driver is now partially accelerated. The built-in graphics on the Multia is supported in 8-plane mode, and PCI cards with 8 or 16 MB framebuffers are supported in 24-plane mode. TGA2 (aka PowerStorm 3D30/4D20) cards are not currently supported. o Current Known Problems 1. Virtual desktops and multiple modelines do not work. You should specify only one modeline. 2. Hardware cursor is only supported on systems with the BT485 ramdac, ie the Multia. 3. After the server has been run using the hardware cursor, the Linux TGA console cursor (which also uses the hardware cursor) is shifted down by one pixel. This problem does not affect Linux kernels 2.2.10 and above, which do not use the hardware cursor. 4. The XAA PolySegment() method is buggy. If you experience server crashes with SIGFPE, or server hangs, try disabling it (see below). o The following options may be specified for the 21030 driver: BusID Currently it is necessary to specify the BusID so that the server will find the card. Check /proc/pci and look for the bus, device, and function numbers in the 21030 section. On a Multia, this should be "PCI:0:11:0". MemBase 0x??????? If the server does not detect the base address of the 21030, then check /proc/pci for the 21030 and look for the "Prefetchable 32 bit memory at 0x???????" and enter this as your MemBase setting. Option Disables acceleration. Option Disables the hardware cursor. Option Disables the XAA PolySegment() method. 2. Authors o Matthew Grossman, <mailto:mattg@oz.net> o Alan Hourihane, <mailto:alanh@fairlite.demon.co.uk> o Martin Lucina, <mailto:mato@kotelna.sk> o Tim Rowley, <mailto:tor@cs.brown.edu> |
Name Last modified Size
Parent Directory -
CVS/ 19-Mar-2020 23:41 -
src/ 19-Mar-2020 23:41 -
COPYING 03-Jun-2013 11:59 4.4K
ChangeLog 03-Jun-2013 11:59 18K
INSTALL 03-Jun-2013 11:59 11K
Makefile.am 03-Jun-2013 11:59 1.3K
Makefile.in 03-Jun-2013 11:59 25K
README 03-Jun-2013 11:59 2.2K
aclocal.m4 03-Jun-2013 11:59 414K
config.guess 03-Jun-2013 11:59 44K
config.h.in 03-Jun-2013 11:59 2.0K
config.sub 03-Jun-2013 11:59 34K
configure 03-Jun-2013 11:59 590K
configure.ac 03-Jun-2013 11:59 4.2K
depcomp 03-Jun-2013 11:59 20K
install-sh 03-Jun-2013 11:59 14K
ltmain.sh 03-Jun-2013 11:59 277K
missing 03-Jun-2013 11:59 10K
NLUUG - Open Systems. Open Standards
Become a member
and get discounts on conferences and more, see the NLUUG website!