$NetBSD: UPDATING,v 1.366 2024/11/11 13:58:56 riastradh Exp $ This file (UPDATING) is intended to be a brief reference to recent changes that might cause problems in the build process, and a guide for what to do if something doesn't work. For a more detailed description of the recommended way to build NetBSD using build.sh, see the BUILDING file. Note that much of the advice in this UPDATING file was written before build.sh existed. Nevertheless, the advice here may be useful for working around specific problems with build.sh. Sections are marked with "^^^^^". After the section on "Recent changes" are several sections containing more general information. See also: BUILDING, build.sh, Makefile. Recent changes: ^^^^^^^^^^^^^^^ 20241104: Changes around the integration of the zstd compression library may require manual deletion of some object directories if you update from a build from a few days ago: rm -rf DESTDIR/usr/lib/*/libarchive* rm -rf DESTDIR/usr/lib/*/libmagic* rm -rf DESTDIR/usr/lib/*/libzstd* rm -rf DESTDIR/usr/lib/libarchive* rm -rf DESTDIR/usr/lib/libmagic* rm -rf DESTDIR/usr/lib/libzstd* rm -rf OBJDIR/compat/*/*/external/bsd/file/ rm -rf OBJDIR/compat/*/*/external/bsd/libarchive/ rm -rf OBJDIR/compat/*/*/external/bsd/zstd/ rm -rf OBJDIR/external/bsd/file/ rm -rf OBJDIR/external/bsd/libarchive/ rm -rf OBJDIR/external/bsd/zstd/ rm -rf OBJDIR/external/gpl3/gcc/ rm -rf OBJDIR/tools/gcc/ 20240926: Building -current when running on amd64 from about 20240924 to about 20240926 will not work due to a "malloc_np.h" error. Please downgrade to a version from 20240924 or older, or upgrade to a newer version e.g. using a binary release from the NetBSD build servers. 20240923: Update builds will require cleaning the object directories for jemalloc (like: "rm -rf $OBJ/external/bsd/jemalloc*") and the libc dependency files (like: "rm $OBJ/lib/libc/jemalloc.*"). On architectures with COMPAT libs, those also have to be cleaned, e.g. on sparc64: "rm -rf $OBJ/compat/sparc64/sparc/external/bsd/jemalloc*" and "rm $OBJ/compat/sparc64/sparc/lib/libc/jemalloc.*". 20240817: Update builds will require cleaning in src/external/historical/nawk/bin in order to remove the awk binary since now there is a subdirectory called awk. 20240812: Update builds will require removing the tools objdir for gdb if building with MKCROSSGDB=yes. All architectures use gdb.old now. 20240630: Update builds will require removing the tools objdir for binutils (as most architectures should use binutils.old now). 20240610: Update builds are likely to require removing the objdir for distrib//cdroms - or at least references to libarchive from within there after the recent libarchive update. 20240504: Update builds on x86 require making the `cleandir' target in lib/libm, or deleting the objdir for lib/libm. 20240423: Update builds with x11 may fail after switching to Mesa 21. 20240410: Update builds may require manually deleting $DESTDIR/var/run/named (and, potentially, $DESTDIR/var/run/lwresd) in order to avoid checkflist failure. 20240409: 32-bit compatibility libraries were moved into the base32 and debug32 sets. HTML man pages were moved into the manhtml set. 20230828: If: - you updated to current and ran postinstall between 20230826 and 20230828 inclusive, and - you are not using anything outside the base system to populate /etc/openssl/certs (e.g., manually adding certificates or using ca-certificates or mozilla-rootcerts or mozilla-rootcerts-openssl from pkgsrc), delete /etc/openssl/certs and rerun postinstall or just `certctl rehash'. Otherwise, certctl(8) will think someone else has left /etc/openssl/certs in the way and will avoid clobbering it on upgrade from older NetBSD. 20230718: build.sh will use mk.conf in the same directory as build.sh instead of /etc/mk.conf, unless MAKECONF is already defined in the environment. 20230714: Import of gcc 10.5 requires a clean build of at least tools/gcc and external/gpl3/gcc* object directories. An update build without cleaning will result in obscure failures in rare corner cases. 20230604: Building native kernels with the installed make(1) instead of the $TOOLDIR/bin/nbmake-${arch} wrapper will fail if userland has not been updated. Note that this is an unsupported build configuration (but usually works if userland is -current enough). 20230523: ctfmerge was fixed as macOS host tool. This may require a clean tools rebuild to detect the update to tools/compat/configure. 20230515: New openssl build requires removal of the crypto/external/bsd/openssl and tests/crypto/libcrypto subdirectories in the ${OBJDIR} hierarchy. Otherwise test results may be wrong due to wrong "golden" output files being installed. 20230322: Fixes for moved /lib/libisns* mean that builds will complain about ./usr/lib/libisns* being missing until src/lib/libisns is forced to (re)install the files, including the symlinks. The simplest way is to clean this subdir before building. 20230112: New binutils require an updated ld.elf_so. If you are doing (unsupported) in-place self builds (with the -E flag to build.sh), make sure to have installed latest ld.elf_so before you rebuild userland. 20221116: The addition to NetBSD's version of UFS2 of support for extended attributes broke backward compatibility with previous releases of NetBSD, so UFS2 has been restored to being compatible with previous NetBSD releases by disabling extended attributes. (Note that ACLs are implemented as extended attributes, so this changes disables ACLs as well.) Support for UFS2 with extended attributes is now available in a new UFS variant called UFS2ea. If you have created extended attributes in an original UFS2 file system then "fsck -p" will now fail due to the unexpected presence of extended attributes and "fsck -y" will remove all extended attributes. If you wish to preserve extended attributes rather than delete them, there is a utility to convert a UFS2 file system to UFS2ea and leave extended attributes in place, but this should be used with caution since it will preserve any extended attributes that have been corrupted by the backward incompatibility too. If you wish to use a UFS2ea file system as your root file system, then you will need to update your boot loader to a version that supports UFS2ea. For more information, see: https://wiki.netbsd.org/features/UFS2ea 20221111: The new libdrm import worsened the conflict issues for the kdump/ktruss ioctl, and i915 now conflicts with base, and has been turned off. This will cause update build issues like: kdump-ioctl.c:12175:143: error: 'DRM_IOCTL_I915_DESTROY_HEAP' undeclared here (not in a function); did you mean 'DRM_IOCTL_MODE_DESTROY_DUMB'? You'll need to clean usr.bin/ktruss, usr.bin/kdump, and rescue. 20220921: Since the kernel version was bumped to 9.99.100, the bootloader must be updated on x86 or EFI boot platforms in order to load modules from boot.cfg(5) or interactively at the bootloader prompt. The kernel can still load modules at runtime, with modload(8) or modules.conf(5), with no bootloader update. This will not affect release branches because it only applies to patch numbers >=100. On x86 (i386 or amd64) with BIOS boot, this requires copying a new /usr/mdec/boot to /boot. You can build this in the destdir by running `$TOOLDIR/bin/nbmake-$ARCH dependall install' in sys/arch/i386/stand. On platforms with EFI boot (including x86 with EFI boot), this requires copying a new /usr/mdec/boot*.efi to the EFI/BOOT/ directory on the EFI system partition. The boot*.efi file is: aarch64 bootaa64.efi amd64 bootx64.efi arm bootarm.efi (32-bit arm) i386 bootx32.efi You can build this in the destdir by running `$TOOLDIR/bin/nbmake-$ARCH dependall install' in sys/stand/efiboot/boot*. 20220821: Support for building extsrc/ has been deprecated. EXTSRCSRCDIR and MKEXTSRC have been deprecated. 20220714: Updates to xorg-server and associated drivers may cause builds to fail. Cleaning both DESTDIR and the xorg build tree may be needed. 20220628: Changes in the build of src/games/robots require a clean build of that program. 20211116: Changes in the xorg build require clean obj dirs for external/mit/xorg (or a full clean/non-update build). 20211112: Device tree sources were updated for evbarm. Some device nodes (in particular, ld(4) devices on the ROCKPro64) will be renumbered. 20211014: MKPIE default for aarch64 has changed, a clean build is required. 20210917: Changed MNT_ACLS to default to POSIX1e ACLs instead of NFSv4 ACLs, to be compatible with FreeBSD. If you are using NFSv4 ACLs and have "acls" in /etc/fstab you'll need to change it to "nfs4acls". 20210711: Updated GMP sources may require cleaning in tools/gmp and/or in external/lgpl3/gmp/lib, particularly if GCC itself does not build. 20210417: GCC 10 was enabled for several platforms. If builds fail in either tools/gcc or external/gpl3/gcc, first try cleaning those objects and removing the $DESTDIR/usr/include/g++ subdirectory. 20201016: MIPS kernel modules have been disabled until they work. This will turn up in extra files in the DESTDIR, which should be cleaned. 20200925: GNU MPC and MPFR have been updated. At least MPFR needs cleaning in both the tools and external dirs. 20200912: GCC 9 has arrived for Arm and x86 platforms, and will be coming for several more, as will binutils 2.34. Clean as required. 20200907: GCC 9 is coming, and binutils has been updated for MIPS. This probably requires cleaning the tools/binutils. 20200811: GCC updates may require cleaning the objdir. This may occur due to GCC 7.5 update, GCC 8.4 move to gcc.old, or the upcoming GCC 9 upgrade. 20200614: blacklist* has been renamed to blocklist*. postinstall(8) should handle the migration. 20200601: Due to a mistake in LIBISPRIVATE handling, .so libraries were created in the build directories and need cleaning. 20200311: GCC 8 ports will need cleaning in src/tools/gcc and src/external/gpl3/gcc due to GCC 8.4 update. 20191118: More architectures were switched to gcc8: i386, ia64 powerpc64, sparc, sparc64, arm The same comments as in 20191022 apply. 20191112: The LLVM update requires a clean rebuild for all architectures using LLVM during the tools build phase (i386, amd64, aarch64). 20191022: Ports amd64 and aarch64 switched to GCC 8.3 by default. In-place ("expert mode", build.sh -E) builds are not supported when going from a GCC 7 userland to GCC 8. Do a regular build to a different DESTDIR (or preferably: build.sh -U) at least once and install sets, or download comp.{tar.xz,tgz} from the daily builds and install that before doing the next in-place build. 20191001: GCC 8.3 was imported. Builds of src/tools/gcc may fail if old builds with GCC 7 output now uses GCC 8. Clean this directory, and also clean src/external/gpl3/gcc. 20190903: Files with names that coincide with existing files' names on case-insensitive file systems were inadvertently committed, for radeon GPU firmware. We cannot mark these as obsolete for postinstall to fix, so if you updated src since 2019-08-26, and ran build.sh distribution or ran build.sh release, you must manually delete the following files in your DESTDIR (which is usually $OBJDIR/destir.$ARCH), or from / if you have installed them: /libdata/firmware/radeon/bonaire_ce.bin /libdata/firmware/radeon/bonaire_mc.bin /libdata/firmware/radeon/bonaire_me.bin /libdata/firmware/radeon/bonaire_mec.bin /libdata/firmware/radeon/bonaire_pfp.bin /libdata/firmware/radeon/bonaire_rlc.bin /libdata/firmware/radeon/bonaire_sdma.bin /libdata/firmware/radeon/bonaire_smc.bin /libdata/firmware/radeon/bonaire_uvd.bin /libdata/firmware/radeon/hainan_ce.bin /libdata/firmware/radeon/hainan_mc.bin /libdata/firmware/radeon/hainan_me.bin /libdata/firmware/radeon/hainan_pfp.bin /libdata/firmware/radeon/hainan_rlc.bin /libdata/firmware/radeon/hainan_smc.bin /libdata/firmware/radeon/hawaii_ce.bin /libdata/firmware/radeon/hawaii_mc.bin /libdata/firmware/radeon/hawaii_me.bin /libdata/firmware/radeon/hawaii_mec.bin /libdata/firmware/radeon/hawaii_pfp.bin /libdata/firmware/radeon/hawaii_rlc.bin /libdata/firmware/radeon/hawaii_sdma.bin /libdata/firmware/radeon/hawaii_smc.bin /libdata/firmware/radeon/kabini_ce.bin /libdata/firmware/radeon/kabini_me.bin /libdata/firmware/radeon/kabini_mec.bin /libdata/firmware/radeon/kabini_pfp.bin /libdata/firmware/radeon/kabini_rlc.bin /libdata/firmware/radeon/kabini_sdma.bin /libdata/firmware/radeon/kaveri_ce.bin /libdata/firmware/radeon/kaveri_me.bin /libdata/firmware/radeon/kaveri_mec.bin /libdata/firmware/radeon/kaveri_mec2.bin /libdata/firmware/radeon/kaveri_pfp.bin /libdata/firmware/radeon/kaveri_rlc.bin /libdata/firmware/radeon/kaveri_sdma.bin /libdata/firmware/radeon/mullins_ce.bin /libdata/firmware/radeon/mullins_me.bin /libdata/firmware/radeon/mullins_mec.bin /libdata/firmware/radeon/mullins_pfp.bin /libdata/firmware/radeon/mullins_rlc.bin /libdata/firmware/radeon/mullins_sdma.bin /libdata/firmware/radeon/oland_ce.bin /libdata/firmware/radeon/oland_mc.bin /libdata/firmware/radeon/oland_me.bin /libdata/firmware/radeon/oland_pfp.bin /libdata/firmware/radeon/oland_rlc.bin /libdata/firmware/radeon/oland_smc.bin /libdata/firmware/radeon/pitcairn_ce.bin /libdata/firmware/radeon/pitcairn_mc.bin /libdata/firmware/radeon/pitcairn_me.bin /libdata/firmware/radeon/pitcairn_pfp.bin /libdata/firmware/radeon/pitcairn_rlc.bin /libdata/firmware/radeon/pitcairn_smc.bin /libdata/firmware/radeon/tahiti_ce.bin /libdata/firmware/radeon/tahiti_mc.bin /libdata/firmware/radeon/tahiti_me.bin /libdata/firmware/radeon/tahiti_pfp.bin /libdata/firmware/radeon/tahiti_rlc.bin /libdata/firmware/radeon/tahiti_smc.bin /libdata/firmware/radeon/verde_ce.bin /libdata/firmware/radeon/verde_mc.bin /libdata/firmware/radeon/verde_me.bin /libdata/firmware/radeon/verde_pfp.bin /libdata/firmware/radeon/verde_rlc.bin /libdata/firmware/radeon/verde_smc.bin We will re-import these radeon firmware images another way later. 20190727: The uefi bootloader has gained tftp support and needs a clean build. If you do update builds, manually clean its object directory by something like: cd sys/arch/i386/stand/efiboot && make clean 20190723: The jemalloc allocator in libc is now built without extended debugging (for performance reasons). In update builds make sure to rebuild it completely, by removing all affected object files, including compat builds, something like: cd /usr/obj && find . -type d -name jemalloc|xargs rm -rf 20190207: GCC 7 switched for many ports. Update builds are likely to fail. Hints for a more successful build: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use build.sh, but do not use its "expert mode": This will automatically build the tools in the correct order, and it will keep the tools and the new build products from interfering with the running system. This will allow you to ignore most of the other advice in this file. Build a new kernel first: This makes sure that any new system calls or features expected by the new userland will be present. This helps to avoid critical errors when upgrading. Use object directories: This helps to keep stale object files from polluting the build if a Makefile "forgets" about one. It also makes it easier to clean up after a build. It's also necessary if you want to use the same source tree for multiple machines. To use object directories with build.sh: a) invoke build.sh with the "-M" or "-O" options. To use object directories without using build.sh: a) cd /usr/src ; make cleandir b) Add "OBJMACHINE=yes" to /etc/mk.conf c) Add "MKOBJDIRS=yes" to /etc/mk.conf d) cd /usr/src ; make build Note that running "make obj" in a directory will create in obj.$MACHINE directory. Build to a DESTDIR: This helps to keep old installed files (especially libraries) from interfering with the new build. To build to a DESTDIR with build.sh, use the "-D" option. To build to a DESTDIR without using build.sh, set the DESTDIR environment variable before running make build. It should be set to the pathname of an initially empty directory. Problems: if you do not use build.sh, you might need to update critical utilities without using DESTDIR since nothing is executed from what is installed in DESTDIR. (See critical utils, below.) Build often: This keeps critical utilities current enough to not choke on any other part of the source tree that depends on up to date functionality. If you use build.sh, you should not have this problem. What to do if things don't work: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ When things don't work there are usually a few things that commonly should be done. 1) make includes This should be done automatically by make build. 2) cd share/mk && make install Again, automatically done by make build. Failsafe rebuild of a small part of the tree: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ To make sure you rebuild something correctly you want to do something like the following: 1) Make sure the includes and .mk files are up to date. 2) Make sure any program used to build the particular utility is up to date. (yacc, lex, etc...) 3) cd ...path/to/util... make cleandir rm ...all obj directories... make cleandir # yes, again make obj make depend && make Failsafe rebuild of the entire tree: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If you really want to make sure the source tree is clean and ready for a build try the following. Note that sourcing /etc/mk.conf (a make(1) Makefile) in this manner is not right, and will not work for anyone who uses any make(1) features in /etc/mk.conf. ---cut here--- #!/bin/sh . /etc/mk.conf if [ -z $NETBSDSRCDIR ] ; then NETBSDSRCDIR=/usr/src fi if [ \! -d $NETBSDSRCDIR ] ; then echo Unable to find sources exit 1 fi find $NETBSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \; if [ -z $BSDOBJDIR ] ; then BSDOBJDIR=/usr/obj fi if [ -d $BSDOBJDIR ] ; then rm -rf $BSDOBJDIR fi cd $NETBSDSRCDIR && make cleandir ---cut here--- Critical utilities: ^^^^^^^^^^^^^^^^^^^ usr.bin/make usr.bin/yacc usr.bin/lex usr.bin/xlint usr.bin/config Other problems and possible solutions: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Symptom:Complaints involving a Makefile. Fix: Rebuild usr.bin/make: cd usr.bin/make && make && make install Or, a failsafe method if that doesn't work: cd usr.bin/make && cc -DMAKE_NATIVE *.c -I. -o make \ && install make /usr/bin Fix: Make sure .mk files are up to date. cd share/mk && make install Symptom:Kernel `config' fails to configure any kernel, including GENERIC. Fix: Rebuild usr.bin/config Symptom:Obsolete intermediate files are used during compilation Fix: Try the following sequence of commands in the directory in question. make cleandir; rm `make print-objdir`; make cleandir; make obj (If you built the tree without "make obj" in the past, obsolete files may remain. The command tries to clean everything up) Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible pointer type Fix: Rebuild and install usr.bin/menuc Symptom:mklocale not found during build in share/locale/ctype Fix: Build and install usr.bin/mklocale Symptom:undefined reference to `__assert13' or `__unsetenv13' Fix: Rebuild and install lib/libc Symptom:usr.bin/config fails to build. Fix: Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile. Symptom:undefined reference to `getprogname' or `setprogname' Fix: Rebuild and install lib/libc Symptom:Update build fails in src/tools/gcc complaining that a variable (e.g. CPPFLAGS) has changed since the previous run. Fix: Run "nbmake-${ARCH} clean" in src/tools/gcc or do a clean build. Symptom:cvs [update aborted]: cannot open directory /cvsroot/src/...: No such file or directory. Cause: If a directory is created by mistake, then it is sometimes deleted from the CVS repository using administrative commands that bypass the normal cvs access controls. If your cvs working tree contains references to a directory that has been deleted on the server in this way, then "cvs update" reports this error. Fix: Recursively delete the affected directory from your working tree and try the update again.