[NLUUG]   Welcome to ftp.nluug.nl
Current directory: /ftp/pub/os/Linux/distr/CTAN/systems/msdos/public-tex/
 
Current bandwidth utilization 1681.28 Mbit/s
Bandwidth utilization bar
Contents of README:
PubliC (e)TeX/METAFONT/MetaPost, and the Dos-TP implementations of the
utilities (for MS Dos, in Turbo Pascal)

1. Files

This distribution consists of quite a few .zip files grouped as follows:

   SRCxxx      sources
   EXExxx      precompiled programs
   RUNxxx      documentation plus a few support files

where xxx indicates the components (individual programs or groups of
programs).

You will always need the RUNxxx files for whatever components you
select to install.  In addition, if you have a Turbo Pascal compiler
(Version 5.0, 5.5, 6.0, or 7.0) and want to compile the programs ---
possibly with some parameter values modified --- you need the SRCxxx
files.  Otherwise, if you can't or don't want to compile the programs
yourself, you need the EXExxx files.

You can choose from the following components more or less independently
(where yyy is SRC, EXE, or RUN):

   yyyDOSTP   basic support, includes a utility program dostpqry that
              allows to interrogate the Dos-TP file search mechanism.
              Always required, SRCDOSTP required for all SRCxxx.

   SRCASM     sources for various assembler subroutines (mainly for TeX,
              METAFONT, and MetaPost).  In order to generate the .obj
              files from their sources you need a suitable assembler
              (preferably tasm, masm might work as well).  All .obj
              files are contained in SRCDOSTP, thus SRCASM is optional!

   yyyWEB     web system programs tangle and weave;
   yyyPATCH   slightly modified version of tangle and weave plus
              patchtgl, patchweb, and patchwve.
              WEB or PATCH required for all SRCxxx,
              PATCH required for SRCETEX.

   yyyTEXWA   TeXware programs dvitype, patgen, pltotf, pooltype, and
              tftopl.
              Required for (e)trip and (m)trap tests.

   yyyMFWAR   MFware programs gftodvi, gftopk, gftype, mft, and pktype.
              Required in order to generate PK fonts and for trap test.

   yyyMPWAR   MPware programs mptotex, dvitomp, and makempx.
              Required by MetaPost.

   yyyVFWAR   programs related to virtual font (VF) files.

   yyyFONTU   font conversion utilities (to and from PK format).

   yyyBIBTE   BibTeX.

   yyyTEX     TeX (virtex and initex).
              RUNTEX required for e-TeX, SRCTEX required for SRCETEX.

   yyyETEX    e-TeX (evirtex and einitex).

   yyyMETAF   METAFONT (virmf and inimf).

   yyyMETAP   MetaPost (virmp and inimp).

2. Installation and the TeX Directory Structure (TDS)

Let <texmf> denote the root of the TDS as described in the draft `A
Directory Structure for TeX Files' --- typically 'c:\texmf' or similar.
And let <zipdir> be the directory where the .zip files are located.
Make <texmf> the current directory (on the current drive) and unpack all
the .zip files, e.g., by the commands (from the command line, or replace
'%i' by '%%i' in a .bat file):
        cd <texmf>
        for %i in (<zipdir>\*.zip) do unzip -o %i

3. Generating the Programs from their Sources

All SRCxxx file are installed in the directory <texmf>\dostp\<src>
(where <src> is 'src22' for Dos-TP Version 2.2) and its subdirectories.

In order to generate any of the programs you should change to the source
directory:
        cd <texmf>\dostp\<src>
In that directory and its subdirectories there exists a system of MK.BAT
batch files that provide a Unix make like functionality.  You first have
to configure them, in order to
   * tell them the location of your Turbo Pascal compiler TPC.EXE,
   * optionally tell them the name and location of your assembler,
   * select which among the installed components you want to generate
     and which tests you want to run on them.  E.g., in order to
     generate e-TeX you must install SRCTEX and SRCETEX.  It is,
     however, up to you whether you select to generate TeX and e-TeX or
     just e-TeX.
Use:
        mk config
and answer all questions.  After that you can use:
        mk             to generate all selected programs
        mk test        to run all selected tests
        mk trip               just the trip test for TeX
        mk etrip              just the etrip test for e-TeX
        mk trap               just the trap test for METAFONT
        mk mtrap              just the mtrap test for MetaPost
        mk install     to install the generated programs
        mx testx       to run some additional tests (see below)
        mk clean       to remove most temporary files
        mk realclean   to remove all temporary files
You can rerun 'mk config' at any time, you must rerun it after
'mk realclean'.

All files created by 'mk' are in the <texmf>\dostp\tmp directory, they
are moved to their destination by 'mk install' and most are deleted by
'mk clean'.

All files created by 'mk test(x)' are in the <texmf>\dostp\tmp
directory, most of them are deleted when a test has succeeded.  Whereas
most tests (those made by 'mk test') can be performed before or after
the programs are installed (the executables are sought first in the
<texmf>\dostp\tmp and then in the <texmf>\dostp\bin directory), some
other tests (those made by 'testx') can only be performed successfully
after the programs have been installed and the small executables 'tex'
and 'mf' have been configured to invoke virtex/virmf with the plain
format/base (see below) and are ready to be executed.

4. Configuring your System

4.1. The Dos-TP Configuration File

You might wish to modify the Dos-TP configuration file
<texmf>\dostp\texmf.cnf that contains the file search paths for various
classes of input files.  You may also want to keep a copy of that
modified file, since the original file gets replaced by the standard one
during the installation procedure.

4.2. (e)TeX, METAFONT, and MetaPost

You should use the TeXMFcnf utility in the <texmf>\dostp directory to
configure small executable files such as 'tex', 'plaintex', 'latex',
etc. that invoke (e)virtex/virmf/virmp with a suitable default
format/base/mem, e.g.:

        cd <texmf>\dostp
        texmfcnf tex - tex       % use format from input file (or plain)
        texmfcnf tex plain plaintex     % use `plain' format
        texmfcnf etex - e-tex    % use format from input file (or plain)
        texmfcnf etex etex etex         % use `etex' format
        texmfcnf mf - mf         % use base from input file (or plain)
        texmfcnf mf plain plainmf       % use `plain' base
        texmfcnf mf cm cmmf             % use `cm' base
        texmfcnf mp - mp         % use mem from input file (or plain)
        texmfcnf mp plain plainmp       % use `plain' mem

5. Running the Programs

All executables are in the <texmf>\dostp\bin directory, therefore you
should add it to your Dos path.  You SHOULD NOT, however, move all the
executables from the <texmf>\dostp\bin directory to another directory
already in the Dos path; this will most probably fail.

All programs accept command line parameters, the <texmf>\dostp\doc
directory contains detailed desriptions.

In order to generate (e)TeX formats, METAFONT bases, and MetaPost mems
run (e)INITEX, INIMF, or INIMP from the <texmf>\dostp\ini directory,
e.g.:
        cd <texmf>\dostp\ini
        initex -cec850 plain.itx
        einitex -cec850 -fetex *etex.src \dump
        inimf -cec850 plain.imf
        inimf &plain cm.imf
        inimp -cec850 plain.imp

You might have to get many (La)TeX, METAFONT and MetaPost source
files and place them into the TDS tree, e.g., from one of the CTAN
archives.  If you wish to generate fonts, you can then, e.g., say:
        mf \mode=ibmtont; mag=1; scrollmode; input logo8
        gftopk logo8 <texmf>\fonts\pk\ibmtont\public\mflogo\dpi100\
        cmmf \mode=cx; mag=1.2; scrollmode; input cmss8
        gftopk cmss8 <texmf>\fonts\pk\cx\public\cm\dpi360\

                        ***** Happy TeXing *****

---  Peter Breitenlohner (peb@mppmu.mpg.de) ------------  06 Sep 98  ---

Icon  Name                                        Last modified      Size  
[DIR] Parent Directory - [DIR] exe/ 03-Apr-2000 12:04 - [DIR] run/ 20-Oct-1999 09:25 - [DIR] src/ 20-Oct-1999 09:25 - [TXT] README 05-Sep-1998 02:00 7.7K

NLUUG - Open Systems. Open Standards
Become a member and get discounts on conferences and more, see the NLUUG website!