[NLUUG]   Welcome to ftp.nluug.nl
Current directory: /ftp/pub/os/Linux/distr/CTAN/systems/chitex/Unix/
 
Current bandwidth utilization 1867.14 Mbit/s
Bandwidth utilization bar
Contents of README:
Before install chitex:

You need to install some packges.
*(Install tetex or texlive.
  New package of linux contains texlive as default.)

(0) For Fedora:
    Fedora 9-13 include package texlive.
       If you are in Fedora 9-12, you should first install:
         軟體開發   (安裝 Fedora 時 安裝)
         (或安裝 Fedora 後安裝 gcc 及 dvipdfmx) 及
         texlive-2007-30.fc9(i386), texlive-2007-35.fc10(i386),
         texlive-2007-42.fc11(i386),or texlive-2007-43.fc12(i386))
         (texlive 的安裝:
           (1) Fedora9-10 可在安裝 Fedora 時或之後 安裝
               安裝 Fedora 時: 應用程式中選 "編寫與出版"
           (2) 若為 Fedora 11-12, 安裝 Fedora 之後安裝
               用新增/移除軟體, 用 Find 鍵入 "texlive" 然後全選
               各項 後 "套用")
           (3) 若為 Fedora 13-14, 安裝 Fedora 之後安裝
               用新增/移除軟體, 用 Find 鍵入 "texlive" 然後
              (a) 全選各項 後 "套用") 或
               (b) 選;(i) Binaries for the TeX formatting setting...
                       (ii) A Dvi to Postscript converter for ...
                       (iii) Texmf files needed for texlive-afm
                       (vi)  Texmf files needed for texliv-latex
                       (v)   Texmf files needed for texliv-xetex
                       (vi)  TexmfTypesetting engine using unicode with opentype ...
               及安裝:
                    cernlib-static 2006-34.fc13  (Fedora 13 要安裝)
         其他要安裝的:
            (a) gcc, xdvi (安裝 Fedora 之後安裝)
            (b) xdvipdfmx  (Fedora9-12,14 安裝 Fedora 之後安裝, Fedora 11,13 不須安裝)
            (c) 若為 Fedora 11, 要再安裝:
                   kpathsea-devel-2007-42.fc11

(1) Debian:
    Debian 4.0-5.0 include package texlive-full
    If you are in Debian 4.0, you should install:
       gcc, gawk, texlive-full, MATHLIB(libmathlib2-dev)  (一定要安裝)
       dvipdfmx, xdvi and freetype1-tools(for 4.0)
    If you are in Debian 5.0, you should install:
       gcc, gawk, texlive-full, MATHLIB(libmathlib2-dev)  (一定要安裝)
       make                                               (一定要安裝)

(2) Ubuntu:
    Ubuntu 8.04-10.10 include package texlive-full
    If you are in Ubuntu 8.04, you should install:
       gcc, gawk, texlive-full, MATHLIB(libmathlib2-dev)  (一定要安裝)
       dvipdfmx, xdvi and freetype1-tools
    If you are in Ubuntu 8.10, you should install:
       gawk, texlive, MATHLIB(libmathlib2-dev)  (一定要安裝)
    If you are in Ubuntu 9.04-9.10, you should install:
       gawk, texlive-full, MATHLIB(libmathlib2-dev)  (一定要安裝)
       freetype1-tools (For Ubuntu 9.04)
    If you are in Ubuntu 10.04:
       (a) you should install:
           texlive-full, texlive-omega, MATHLIB(libmathlib2-dev)  (一定要安裝)
       (b) 要安裝 chitex 要以 root 身份來安裝. Ubuntu 10.04 要下指令:
                 sudo passwd root
           來設定 root 的密碼. 之後再改變 user 為 root 登入後
           才能安裝 chitex (請再參見下面 How to Install)
    If you are in Ubuntu 10.10:
       (a) you should install:
           gawk, texlive-full, MATHLIB(libmathlib2-dev)  (一定要安裝)
       (b) 要安裝 chitex 要以 root 身份來安裝可如:
                 sudo su -

(3) FreeBSD:
    If you are in FreeBSD 7.1 you should install:
       Developer (安裝系統時選取, 或之後補選取安裝)
       cjklatex
    If you are in FreeBSD 7.2 you should install:
       Developer (安裝系統時選取, 或之後補選取安裝)
       gawk, cjklatex
    If you are in FreeBSD 8.0 you should install:
       Developer
       teTeX-base, teTeX-texmf, xdvi
       gawk, Freetype-tool (or cjklatex)
    If you are in FreeBSD 8.1 you should install:
       Developer (if it has not gcc )
       teTeX-base, teTeX-texmf, dvipdfmx
       gawk (if it has not gawk)
       Freetype-tool(or cjklatex) (if it has not ttf2tfm)

(4) 自行抓取 texlive 安裝 tex 者, 需重整 path :
    在  texlive/2010 (例如) 目錄中:
        Give command: ./install-tl 之後, 出現 "Enter command:" 後 鍵入 D 如下:
             Enter command: D
        之後出現:
         <1> TEXDIR:       /usr/local/texlive/2010
             support tree: /usr/local/texlive/2010/texmf
         <2> TEXMFLOCAL:     /usr/local/texlive/texmf-local
         <3> TEXMFSYSVAR:    /usr/local/texlive/2010/texmf-var
         <4> TEXMFSYSCONFIG: /usr/local/texlive/2010/texmf-config

       鍵入 1 修改 TEXDIR 如下:
          Enter command: 1
          New value for TEXDIR [/usr/local/texlive/2010]: /usr/share
       之後, 鍵入 2 修改 TEXMFLOCAL 如下:
          Enter command: 2
          New value for TEXMFLOCAL [/usr/share/texmf-local]: /usr/share/texmf
       之後, 鍵入 3 修改 TEXMFSYSVAR 如下:
          Enter command: 3
          New value for TEXMFSYSCONFIG [/usr/share/texmf-var]: /usr/share/texmf
       之後, 鍵入 3 修改 TEXMFSYSVAR 如下:
          Enter command: 4
          New value for TEXMFSYSCONFIG [/usr/share/texmf-config]: /usr/share/texmf
       之後, 鍵入 R 回 Main Menu  如下:
          Enter command: R

       再鍵入 O 修改 options 如下:
          Enter command: O
       之後, 鍵入 L 修改 binary directory 為 /usr/bin (重要一定要做) 如下:
          Enter command: L
          New value for binary directory [/usr/local/bin]: /usr/bin
       之後, 鍵入 R 回 Main Menu  如下:
          Enter command: R

       再鍵入 I 已安裝到 hard disk 如下:
          Enter command: I

    完成上面之後, 再依照 unix 的系統為 Fedora, Debian, Ububtu 或 FreeBSD
    參見上面 (0) Fedora (1) Debian (2) Ububtu (3) FreeBSD 之說明
    看是否需安裝必要的 package

Install chitex:
        In this page (directory), download file "chitexu_15a61.tgz".
        Give command:
             zcat chitexu_15a63.tgz|tar xvf -
        to have a directory "6.1.2p15a63". Then in this directory,
        give command
             chmod +x setup
        and run:
             ./setup 
        to install chitex.
 
 Other site which has package of chitex (unix):
   ftp://ftp.math.ncu.edu.tw/chitex/unix


Icon  Name                                         Last modified      Size  
[DIR] Parent Directory - [TXT] README 03-Apr-2011 13:38 5.9K [   ] chitexu_15a63.tar.gz 03-Apr-2011 13:26 310M

NLUUG - Open Systems. Open Standards
Become a member and get discounts on conferences and more, see the NLUUG website!